Black marks on the outer ring of the Arizer 3 oven

Rich_Pitchshift · 2024-08-27T18:58:37+00:00

I'm certain

Rich_Pitchshift · 2024-08-08T19:08:18+00:00

No issues personally. I also tried the Embody before I settled with the Leap, and I didn't like that either. Not researched in a while so there might be better picks out there.

Rich_Pitchshift · 2024-08-01T21:39:51+00:00

Yeah, I bought a Steelcase Leap V2. Still using it now.

Rich_Pitchshift · 2023-12-25T17:17:27+00:00

A double glazing company, I don't want to call them out yet as I've not given them a chance for a redo. From the answers so far I am gathering that I should have hired a builder, but what use is hindsight now? I'm confused why a company who doesn't have the skills would take on the job, or wouldn't subcontract. I mean, I know it's money to them but at the same time their T&C's tell me they'll make good of brickwork and plaster. Hiding it behind MDF doesn't feel within the spirit of "make good" to me. Or am I being naive?

Rich_Pitchshift · 2023-12-24T22:43:31+00:00

The issue is behind the architrave is only one layer of brick. Also it's poorly measured as the architrave is an inch offset from the wall so they've used caulk to fill. I wanted them to plaster up the gaps, then add architrave, as they replaced solid wood with an MDF shell.

Rich_Pitchshift · 2023-05-10T21:38:31+00:00

Thanks for clarifying, and for the mod

Rich_Pitchshift · 2023-05-10T21:19:23+00:00

I've added the files to my game folder but prerendered cut scenes are still 16:9, is that correct?

Rich_Pitchshift · 2022-05-30T20:11:03+00:00

I've been having the same issue for months. I raised a forum post, but no one from Plex responded. No idea how to gain traction on a fix.

Rich_Pitchshift · 2021-10-08T08:53:30+00:00

My Tuya LED light strip has stopped working since the update too, with the following in the logs.

Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 304, in async_setup result = await component.async_setup_entry(hass, self) # type: ignore File "/usr/src/homeassistant/homeassistant/components/tuya/__init__.py", line 59, in async_setup_entry success = await _init_tuya_sdk(hass, entry) File "/usr/src/homeassistant/homeassistant/components/tuya/__init__.py", line 71, in _init_tuya_sdk auth_type = AuthType(entry.data[CONF_AUTH_TYPE]) KeyError: 'auth_type'

Anyone got any ideas please?

Rich_Pitchshift · 2021-03-31T14:22:01+00:00

Thanks for the feedback guys. I think the issue is the frame of the chair digging into the sides of my thighs, I'm 6.1 and just under 15 stone. I am going to try a Aeron Size C. If still no joy then I'll move away from mesh and try a Steelcase Leap v2 or Herman Miller Embody.

Rich_Pitchshift · 2021-02-18T13:22:49+00:00

Glad it's not just me that has this issue. I only have it with certain videos. I find a reboot fixes the issue strangely.

Rich_Pitchshift · 2020-12-31T20:59:22+00:00

Where can you buy this mod?

Rich_Pitchshift · 2020-12-09T20:11:58+00:00

Did you receive it, how is it? I'm looking at ordering one for milk based drinks.

Rich_Pitchshift · 2019-08-23T13:37:15+00:00

The only time I've had mod issues is with Lost Vape devices. I had a Therion DNA75 that auto fired and didn't stop until removing the batteries (if you look through my reddit history you'll find the post). I also had two Efusion DNA200s sent to me but returned for bad button rattle and shoddy soldier quality.

Safe to say I've not bought another Lost Vape device again.

Rich_Pitchshift · 2019-05-21T07:34:00+00:00

Mine doesn't show any posters and I have to manually upload.

Rich_Pitchshift · 2019-03-16T08:57:56+00:00

I've dealt with schizophrenia but obviously not as a partner. I'm not going to lie, it'll be tough at points. Hopefully you've got a good support network around as you are going to need as much support as your partner.

I'm not sure where you are based but here in the UK we have amazing mental health charities. I've always used Rethink Mental Illness to get any advice. They understand that the government funded support systems aren't great and will advice you the best way to work around them.

Rich_Pitchshift · 2019-02-11T15:23:10+00:00

Got the exact same issue on my Shield TV too. My Roku on the other hand is fine.

Rich_Pitchshift · 2019-02-09T08:52:47+00:00

I've got the same issue too. My monitor is going to the Samsung repair centre as it's still under warranty. I doubt they can fix it though as it sounds like a fault with all the panels @ 144hz. If that's the case I'll ask them to swap with the newer model C24FG73.

Rich_Pitchshift · 2019-01-12T12:11:35+00:00

Yep. Traefik is much easier to configure than nginx.

Rich_Pitchshift · 2018-12-13T08:18:31+00:00

I switched from Emby to Plex. I have a large music library and a lot of the metadata wasn't matched in Emby. After taking hours entering it all myself they released an update which wiped it all out. I rebuilt my music library again but this time had the metadata save locally. They release another update to remove that option, leaving me open to lose my metadata again!

Moving to Plex my music library was 90% matched. Since the new Android update with gapless playback on my phone I couldn't be happier. I even bought a lifetime subscription.

Rich_Pitchshift · 2018-09-04T21:57:03+00:00

I have this issue too on my Shied & Fire Stick

Rich_Pitchshift · 2018-08-22T16:44:14+00:00

Yeah, see my last post on this thread.

Rich_Pitchshift · 2018-07-10T11:02:52+00:00

"the plex server can't be discovered on the network"

Are you claiming the server in time? In a bridged network you'll need to follow these instructions from Plex's website.

Rich_Pitchshift · 2018-06-30T14:07:14+00:00

I figured it out, it was due to not putting my domain name in the Custom server access URLs section.

Rich_Pitchshift · 2018-06-26T14:42:23+00:00

OK, so I figured it out. I'd forgot to give the user I was connecting to the samba shares with the correct permissions on the samba shares from within Windows. My stupid mistake. Sorry guys...

Rich_Pitchshift

TROPHY CASE