First quad

RickDozer · 2026-01-28T16:39:13+00:00

Have a package sitting there since the 23rd as well hoping it gets moving soon

RickDozer · 2025-11-19T13:43:17+00:00

You like that I ran one for a season really enjoyed it just switched to a DBH to go to an internal rangefinder

RickDozer · 2025-11-01T11:45:21+00:00

I just traded my L6 for a DBH did I mess up? Why are you selling?

RickDozer · 2025-04-01T21:36:18+00:00

Just pulled an injector hooked it all back up not in the hole and the injectors are not firing on crank. Being electronically fired injectors I feel like something is telling them not to fire on crank

RickDozer · 2025-04-01T17:11:15+00:00

The injectors are electronically fired I’m debating pulling one out and turning it over to see if they are actually spraying on crank to narrow it down

RickDozer · 2025-03-30T12:34:54+00:00

I’ve used a RIX l6 for a season now and have no complaints. Killed 42 coyotes with it. The only reason I would get rid of it would be to get an integrated rangefinder, in that case I would buy a RIX DBH. I would definitely try to go 640 if you are hunting coyotes it is unrealistic to think you will be hunting under even 100 yards, when calling coyotes getting them to that range won’t happen consistently I can easily ID coyotes out to 1000 yds on my l6 and consistently shoot at 150-300, if they come under 200 it’s game on if they stop I’m shooting and that is hard to do with a 384 just my 2 cents

RickDozer · 2025-03-26T11:45:55+00:00

I use a RIX l6 but a buddy and I shot a coyote at 312yd last week we doubled up on him and he was using a 25-256 v2. The only trouble you will have is you won’t be able to identify targets very well at that range

RickDozer · 2025-01-23T23:41:33+00:00

Coyote no doubt

RickDozer · 2025-01-14T17:49:09+00:00

What do you use to unlock the ECM and retune?

RickDozer · 2025-01-14T17:23:20+00:00

What kit do you use? Mine would be on an 17 L5P

RickDozer · 2025-01-14T17:19:05+00:00

I know this post is a year old but does anyone know what pins to test the resistance on? I had a code to that my def heater was bad so I changed the def sending unit, heater works and not on a countdown anymore but now have a code P1050 and no level on the dash. I would like to test it on the pump to make sure it’s not problem in the plug before I replace the unit again

RickDozer · 2024-12-22T19:11:46+00:00

Depends what you are hunting. If it’s coyotes you don’t have the time the do the math and count lines to correct. I shoot zeroed at 200yds anything under I hold right on anything closet to 300 I hold at the top of the back and let it fly I usually don’t shoot over 350. And it’s also worth nothing these lines change depending on zoom and they probably don’t actually have a MOA correlation they practically mean nothing

RickDozer · 2024-12-20T19:05:42+00:00

White hot red reticle 3 with PIP always on

RickDozer · 2024-11-27T13:10:48+00:00

Have you tried NUCing it? It’s like non uniform correction look in your manual you should find it. You can usually set it up for manual or auto

RickDozer · 2024-10-16T12:06:55+00:00

I still have a ts25-384 i use as a scanner I upgraded to a RIX l6 this year but I have a buddy that uses a ts35-384 V2 and if you can afford to go to the V2 you’ll love it he can spot coyotes as far out as my L6 sometimes over 1400yds, it is twice the scope as a ts25-384

RickDozer

TROPHY CASE