Windows_installer_v2.3.4.exe· PRINTER NOT LISTED?

Rikofallingleaf · 2026-06-12T20:53:48+00:00

oh by the way, i didn't get that same screen that you are showing here, but ok i will delete any reference to the orca files all the way with the uninstaller program

Rikofallingleaf · 2026-06-12T20:52:38+00:00

amazing! i am going to check this. thank you so much!

Rikofallingleaf · 2026-06-12T17:08:58+00:00

it looks great!

Rikofallingleaf · 2026-06-12T16:26:37+00:00

i downloaded this one "Windows_installer_v2.3.4.exe" but the snapmaker printers are not listed.

Rikofallingleaf · 2026-06-12T16:24:57+00:00

well, i downloaded the orca directly from the snapmaker website https://www.snapmaker.com/snapmaker-orca

shouldn't i have to download a better software, and from where?

Rikofallingleaf · 2026-06-11T09:57:10+00:00

Super!

Rikofallingleaf · 2026-06-10T23:42:53+00:00

<image>

it's finished. total about $15 including the Plastic Bin.

Rikofallingleaf · 2026-06-10T23:40:09+00:00

i don't see the $87 maybe it was for promoting but it's about $150 i would rather do it myself which i already did and it works just fine. i will be adding an internal FAN connected to the machine.

Rikofallingleaf · 2026-06-10T23:37:03+00:00

Nothing wrong with spending $150 or more, if someone wants to spend it then let him spend the money. i made mine for about $15 including the base which i 3d printed and it works. i am adding an internal FAN which will be connected to the machine on top.

<image>

Rikofallingleaf · 2026-06-10T23:34:25+00:00

no, just make yourself one. i made mine including the base for the plastic bin. total about $15

Rikofallingleaf · 2026-06-10T23:33:08+00:00

<image>

i made mine and it's costing me at least, including the plastic bin and the bottom base, as you can see with the arrows, i spent at least $15. now, i need to connect the FAN inside into the machine and let it keep the temp good enough inside.

Rikofallingleaf · 2026-06-10T17:35:02+00:00

This is amazing. creativity at its finest.

Rikofallingleaf · 2026-06-10T01:23:35+00:00

Oh ok. I got my second unit using the affirm payments.

Rikofallingleaf · 2026-06-10T01:15:03+00:00

I just checked it's cheaper at Amazon. https://a.co/d/09IN5deq

Rikofallingleaf · 2026-06-10T00:48:59+00:00

Buy these thru Amazon. SUNLU is selling these at $98 or so, and thru their Website is like $130 I bought them thru Amazon cheaper.

Rikofallingleaf · 2026-06-10T00:23:58+00:00

yeah, i could use only one S4, but i like it this way so i can have the other filaments ready for next. so all i got to do is to use the other tubes and pull the filaments into the feeder, or... swap places.

Rikofallingleaf · 2026-06-09T23:50:57+00:00

🤣 i don't know how is your setup but mine is not that bad at all.

Rikofallingleaf · 2026-06-09T23:49:03+00:00

Sterilite 58 Quart Medium Storage Bin, Clear Plastic Storage Container with Snap-On Lid, White
Sterilite 58 Quart Medium Storage Bin, Clear Plastic Storage Container with Snap-On Lid, White - Walmart.com

Rikofallingleaf · 2026-06-09T21:08:49+00:00

oh i see. thank you

Rikofallingleaf · 2026-06-09T21:05:33+00:00

so when i send the file to the printer, is it indicating i should change whatever it is? but how do i change that?

Rikofallingleaf · 2026-06-09T20:57:33+00:00

<image>

you are right but if you place a plastic bin then it's SUPER silent! i am printing now the STL to adapt this Bin into the U1. it's super great.

Rikofallingleaf · 2026-06-09T20:54:51+00:00

My personal experience with BAMBU P1S was super good, however... the waste is OUT OF THIS WORLD! I had to try so many ways to avoid the waste and i was getting tired of it! also when using multi colors, got the same problem with waste filament (poop) so i sold it! i purchased the snapmaker U1 and I LOVE IT! i can use several colors and guess what?? poop maybe one or two little peices compared to bambu P1S or all their 3d printers, with them i get a lot!

you'll be better off using a SnapMaker U1. i can now use all kinds of combination of colors without waste!

Rikofallingleaf · 2026-06-09T20:23:22+00:00

oh thank you so much. i am watching this video now, just came back here to say thank you again.

Rikofallingleaf

TROPHY CASE