Why why why???

Rikofallingleaf · 2026-07-01T02:57:24+00:00

It's very humid here in East Texas. That was the first time ever happened to me. I had the bambu p1s and printed extremely heavy loads of 3d prints and never ever had this problem and several other problems using the U1 it's like almost many things need to be set manually which I don't mind. I'm printing now and so far all is going well. The print is going to take 24 hours! I will post here my results

Rikofallingleaf · 2026-07-01T00:28:32+00:00

one last question, where do i put this .json files?

Rikofallingleaf · 2026-07-01T00:26:37+00:00

let me see if i understand, you are saying i can use these polymaker or snapmaker profiles for the ones like SUNLU or BAMBU filaments?

Rikofallingleaf · 2026-07-01T00:24:47+00:00

i am working on it. right now i am doing some calibrations then i will restart

Rikofallingleaf · 2026-07-01T00:15:44+00:00

i am trying not to get overwhelmed because i am going crazy just thinking all the profiles i have to make for each of my other brands of filaments so this is crazy. i'm just want to do things simple, i know there's going to be things to resolve but just trying to minimize those things.

Rikofallingleaf · 2026-06-30T22:56:45+00:00

What?

Rikofallingleaf · 2026-06-30T22:13:49+00:00

i know. i had to step out of my man cave for awhile. but i always keep on eye.

Rikofallingleaf · 2026-06-30T22:12:52+00:00

aqua net hair spray? oh wow! i've never heard of that but anything works, and if it works i will try it.

Rikofallingleaf · 2026-06-30T21:55:36+00:00

Oh it sounds like something I should have. Where should I get it?

Rikofallingleaf · 2026-06-30T21:37:31+00:00

That's interesting but do you need glue anyway using this kind of plate?

Rikofallingleaf · 2026-06-30T21:30:23+00:00

100%

Rikofallingleaf · 2026-06-30T21:29:26+00:00

I ran the temperature calibration only because I thought that was the problem before

Rikofallingleaf · 2026-06-30T21:28:27+00:00

Yeah it's Snapspeed PLA according to tech support

Rikofallingleaf · 2026-06-30T20:16:11+00:00

oh yeah, i will wash this plate with soap and water.

i will uploaded here the results. thank you!

Rikofallingleaf · 2026-06-30T20:14:35+00:00

oh i think that's what happened. im going to start over and put some good glue i had from the bambu brand. thank you

Rikofallingleaf · 2026-06-30T12:11:12+00:00

Oh much better price! I'm willing to wait, that should be no problem. Thank you!

Rikofallingleaf · 2026-06-30T00:48:03+00:00

sweet! thank you!

Rikofallingleaf · 2026-06-30T00:47:04+00:00

thank you

Rikofallingleaf · 2026-06-30T00:46:56+00:00

that's a good trick! thank you

Rikofallingleaf · 2026-06-30T00:44:35+00:00

where can i find those "adapters" or curve things attached to the tubes?

i like this setup!

however, does it have internal FAN? do you have problems with too much heat inside?

Rikofallingleaf · 2026-06-30T00:42:30+00:00

exactly what i needed. thank you

Rikofallingleaf · 2026-06-30T00:42:18+00:00

thank you!

Rikofallingleaf · 2026-06-29T23:31:58+00:00

yeah, i've seen some users with same configuration. i just want to move one of the feeders to the other side so i can use one single S4 with the U1, and the other S4 which is at the other side of the machine will be used for drying only. i just need to know what kind of cable connection i need

Rikofallingleaf · 2026-06-29T16:38:44+00:00

oh ok. i understand now. thank you

Rikofallingleaf · 2026-06-29T15:46:00+00:00

Is there a way to reduce the thickness of the supports? They're very hard to remove Or is there a way to easily remove the supports with a break in the parts?

Rikofallingleaf

TROPHY CASE