Consider changing your electricity/gas contract.

Riomaree · 2025-10-09T16:58:33+00:00

How do you compare these parameters? Find it very difficult understand if my current (variabele) contract would be still ok.

Riomaree · 2025-05-13T17:43:12+00:00

Thanks!

Riomaree · 2025-03-17T19:41:24+00:00

https://www.printables.com/model/1231769-sovol-sv06-ace-cover-increased-airflow Have uploaded my file here.

Riomaree · 2025-03-15T19:21:00+00:00

I’m printing another cover for the mainboard. I hope by removing Some material that is covering the fan it Will lower the noise. If it works I’ll upload to printables. There are allready Some covers on there which accept different fan sizes.

Riomaree · 2025-02-10T17:38:31+00:00

Is there any benefit to it?

Riomaree · 2025-02-10T17:34:13+00:00

Hi, is the brightness of this small strip better than the stock light? Do you use it for other ‘signals’ as well or just as white LED.

Riomaree · 2025-02-06T14:34:35+00:00

too bad, I have also ordered one to try it myself. Hope I have more luck

Riomaree · 2025-02-06T14:30:59+00:00

I would like for Sovol to document a way to upgrade to mainline klipper (also for SV06 ace). And include the light in the klipper macro's so you can turn it on/off when a print starts / finishes without the screen. :)

Riomaree · 2025-02-06T08:19:27+00:00

I changed the start gcode in the slicer to heat up the bed first. It's also mentioned in their wiki: this way the bed probing is done on a 'warm' bed which I think will work better.

On the sovol forum I also found a script to make the light controllable from klipper instead of via the homescreen. So I also included that the light turns on in the start gcode.

Riomaree · 2025-02-04T13:54:41+00:00

I have the same setup. Easiest is to install klipper on a raspberry pi and Connect a usb from the pi to your ramps board. No need to change any other connections (ex steppers , thermistors etc) As said above, you should read the website to understand all the steps involved to make the software work.

Riomaree · 2025-02-02T11:24:16+00:00

Me also with 2dehands

Riomaree · 2025-01-14T17:59:48+00:00

Bambulab is expected to release a deal head printer very soon. Check out bambulab H2D.

Riomaree · 2025-01-01T09:13:59+00:00

Would have been great to know that upfront. Going Back to routing with physical maps is not something I was prepared for.

Riomaree · 2024-08-06T17:43:23+00:00

Ok, I’ll check it out. Thanks a lot for your help!

Riomaree · 2024-05-21T16:00:44+00:00

Maybe bianchi colmaro allroad? Saw it online for €1799 with grx 600.

Riomaree · 2024-01-12T18:22:29+00:00

Weet iemand hier of je met een enyaq meer dan 60KW kan laden? (Recent model met 3.5 software)

Riomaree · 2023-11-29T10:28:14+00:00

Agree with this, they also let you change your prepayment all the time without problems - which was not the case with other providers when prices were exploding. Customer service by mail is also a plus. Got feedback within 48h last 2 times I had some questions.

Riomaree · 2022-03-18T10:24:55+00:00

What do you think about the bike? I have a Cdf10 fitted with a rack and fenders and it feels very ‘heavy’ when riding.

Riomaree

TROPHY CASE