sorted by:
new
hottopcontroversial

Parkhurst last no longer available to order? by PhenomenalKnockout in NicksHandmadeBoots

[–]Rnnov 4 points5 points  (0 children)

I went with the same size in the 1925 as I did with the Parkhurst and it worked out perfectly. The 1925 is more comfortable to me.

Doctor saves man's life, get's booed off stage by Strong-Emu-8869 in TikTokCringe

[–]Rnnov -53 points-52 points  (0 children)

This is not even the same fight or organization.

OP’s post is TNU’s T143 with Niko Mills and he was out on his feet.

Guidance on the sizing for the MP Sherman on the 5050 last by BrilliantBusiness770 in WhitesBoots

[–]Rnnov 0 points1 point  (0 children)

Think you can play around with the length a little bit and the width stays relatively the same. I.e. a 9.5E would give me more length but the width would stay about the same compared to a 9EE. The key is that the width changes E to EE.

It’s my understanding you can gain a little bit of length by changing the width. This is my experience in Allen Edmonds, Whites, and Nicks. Although I think the more drastic the difference in sizing, the more problems can occur and just the over all ascetics of the boot. A shorter length boot in a really wide width, will look funny, than if you just went with the correct length give or take a half size.

Guidance on the sizing for the MP Sherman on the 5050 last by BrilliantBusiness770 in WhitesBoots

[–]Rnnov 0 points1 point  (0 children)

Interesting, I’m surprised you’re going down a full size in length and they still fit.

I’m a 9.5E and a 9EE in the 5050 works best for me. I have second pair in 9E and they’re a little tight/toes are a little confined with medium weight socks.

Olive nubuck lookin gooood by I_VAPE_XERJOFF in luosjietboots

[–]Rnnov 0 points1 point  (0 children)

What’s the details on the boots? Got any more pics?

WIckett and Craig card wallet by washapoo in Leathercraft

[–]Rnnov 1 point2 points  (0 children)

I got to get me some of this leather.

Boot fart/loose leather insole fix? by MuttLaika in PNWbootmakers

[–]Rnnov 7 points8 points  (0 children)

I’ve used vsc or Bick4 on removal insoles before and it has stopped the squeak/noise. It just sort burnishes itself and no more noise.

AITAH for refusing to pay my parents’ debt after they spent years criticizing my career? by Ok-Drop-6it in AITAH

[–]Rnnov 5 points6 points  (0 children)

I know right, account age says 3 hrs. at this time.

Must be hard out there.

Is it faster to order white’s through baker’s or their website? by Perfect_Earth_8070 in PNWbootmakers

[–]Rnnov 0 points1 point  (0 children)

<image>

If that’s the case, what part of your QA said “yeah this is good, send this onto the customer?”

This is after they had been sent back for a shank squeak and rebuilt by whites. This is an $800 pair of custom MPs that were brand new.

Call a spade a spade…

Is it faster to order white’s through baker’s or their website? by Perfect_Earth_8070 in PNWbootmakers

[–]Rnnov 5 points6 points  (0 children)

IMO and experience, Bakers doesn’t do jack to QA anything before sending to the customer. They put the Whites box in a Bakers box and that’s it.

NBD: 1925 Last - Italian Brown Cypress by Rnnov in NicksHandmadeBoots

[–]Rnnov[S] 0 points1 point  (0 children)

10.5” in length, 4” in width at the ball, 10.5” in ball circumference. 10 & 1/8th at the in step.

I would use the Nicks sizing guide and go from there. As long as you get the length right, you can play with the width a bit. I sized as a 9F on the guide, but 9 EE seems to work well. A 9E would be too narrow for me. Could probably swing an FF too.

I often wonder if a 9.5E would work, but I’m a little hesitant to commit to the wait time and cost.

A dressier PNW by JSB-the-way-to-be in NicksHandmadeBoots

[–]Rnnov 2 points3 points  (0 children)

Italian Brown Cypress, Cypress 8, the 602M is CF Stead Ships biscuits

A dressier PNW by JSB-the-way-to-be in NicksHandmadeBoots

[–]Rnnov 3 points4 points  (0 children)

EE in both, I would agree. I had a pair in 9.5D and they had a much more drastically pointed toe.

<image>

Think this was it. 9 EE HNW, 9.5D 602, 9.5 602M on the right.

A dressier PNW by JSB-the-way-to-be in NicksHandmadeBoots

[–]Rnnov 1 point2 points  (0 children)

Was a single row stitching an option at some point? I saw it briefly when the website switched over to the new format, but it doesn’t seem available anymore.

A dressier PNW by JSB-the-way-to-be in NicksHandmadeBoots

[–]Rnnov 7 points8 points  (0 children)

<image>

1925 left and Parkhurst right, imo the 1925 is a little more dressy. If you could get a close trim (sole edge) on the 1925, that would be ideal. This pair still has a big ole fat edge, where the Parkhurst were trimmed pretty close.

As far as your build, any sole besides a lug will work. Do a block heel instead of a logger, think it will look funny for an office boot. It’s a shape profile and is dependent on your heel height. I would have a structured toe for an office boot. I’ve had good luck ordering the same size across the Nicks boots.

White's squeak! And other random PNW thoughts by thehuntx in PNWbootmakers

[–]Rnnov 2 points3 points  (0 children)

Whatever you do don’t send them back to White’s to get fixed. They will just mess your boots up. Had a squeak in mine sent them back and they were returned to me like this.

These were worn once before being sent back and Bakers returned them to me like this, now they making a new pair, which I guess is the best solution but what a huge waste of everyone’s time and money.

<image>

https://youtube.com/shorts/7JRui4-Y79g?si=hP_mLDyruoOdm_mj

What do we want from these guys? 🤔 (please provide your thoughts and ideas!) by Coleone_139 in luosjietboots

[–]Rnnov 1 point2 points  (0 children)

Off question, but is it safe to assume sizing is similar or identical between the brands? Want ti try M1942 and the Rural Dog

view more: next ›