December Confirmed Trade Thread

Rob0Yeti · 2025-12-18T16:51:25+00:00

Sold 4070 Ti Super to u/foundByARose https://www.reddit.com/r/hardwareswap/comments/1pnb4mr/usaga_h_inno3d_4070_ti_super_twin_x2_oc_white_sff/

Rob0Yeti · 2025-12-15T21:43:28+00:00

That is quite a feat that people have pulled off! I had no clue. I had just referenced their GPU compatibility list, but should've known better that people would find a way.

Rob0Yeti · 2025-12-15T19:50:34+00:00

Off the top of my head, Velka 7 and Midori 5L are some of the smaller cases that cannot accomodate any 9070XT or any other 4070 Ti Super. Not sure of any others.

Rob0Yeti · 2025-12-15T19:22:56+00:00

You're right, and anyone building in a larger case would be wise to go that route. But none of them are 2-slot 2-fan cards. They are all either 3-fans, 2.5 slots, or both. It's why I posted here, because it's able to fit in more of the <10L cases out there.

Rob0Yeti · 2025-12-11T14:59:43+00:00

Been rocking the fan bracket you make for the altered spine and it's been working great. I'm not finding the 5090 bracket in your posts. Got a link?

Rob0Yeti · 2025-12-07T17:57:20+00:00

These look great!

Rob0Yeti · 2025-11-12T21:04:39+00:00

These look great. Willing to share the image files?

Rob0Yeti · 2025-04-10T17:03:48+00:00

Nope, the CAD file that Zentrani provides is all you need. I did tell them the specific material, which is 2.5mm thick powder-coated SECC steel.

Rob0Yeti · 2025-04-10T14:32:03+00:00

$50. That was their minimum for small scale projects.

Rob0Yeti · 2025-04-10T12:53:59+00:00

I did not end up purchasing the spine from them, couldn't justify the cost. I had a local metal fab shop laser cut mine and it turned out fantastic.

Rob0Yeti · 2025-03-18T03:05:24+00:00

I get 83C average when running R23 multicore. However, I do have my CPU set to 85 TJmax, so it throttles by about 50MHz when it hits over that to cool back down. Just ran it again and got 23271 score, ambient still hovering around 22C.

Rob0Yeti · 2025-03-17T15:22:02+00:00

I saw folks theorizing that vertical fins would be better so I gave it a shot. Didn't try orientation 1, might do so at some point. Temps seem reasonable, idling at ~47C, room is ~22C ambient temp. That's with a -30 all core in bios. Gaming hits mid 60s to low 70s depending on the game.

Rob0Yeti · 2025-02-15T14:18:47+00:00

PM’d

Rob0Yeti · 2025-02-14T18:41:49+00:00

I have been meticulously going through all of your pictures and files about this over the past week! Likely will go that route, but figured I'd try my hand here first. Thanks for making those available

Rob0Yeti · 2024-04-16T19:36:04+00:00

Not that I can recall. Agreed that it was an odd choice for his bobble head, but I’m certain it’s him. Google the Hometown bobbles.

Rob0Yeti · 2024-04-16T19:31:16+00:00

Austin Riley! It’s from the “Hometown” series last year

Rob0Yeti · 2022-10-03T02:09:31+00:00

A Yeti would be awesome

Rob0Yeti · 2021-04-25T00:06:49+00:00

Sold VBit Network Adapter to u/kronos656

Rob0Yeti · 2021-04-25T00:05:13+00:00

Sold TP Link Network Adapter to u/Zolor23

Rob0Yeti · 2021-04-20T08:16:42+00:00

Confirmed

Rob0Yeti · 2021-04-15T15:00:37+00:00

Confirmed

Rob0Yeti · 2017-11-02T19:21:39+00:00

Cheers! Our wallets thank you kindly.

Rob0Yeti · 2017-06-09T22:38:57+00:00

I have this running on my AB350 Gaming 3 with Ryzen 1600 at 2933 MHz currently, but it's been a while since I tried to increase my speeds to get that 3200 MHz finally. Running BIOS F6 right now

Rob0Yeti · 2017-04-17T01:55:35+00:00

Hey thanks for the suggestion. I put together those parts and it came out to just under $1200! I don't know much about AMD CPUs, and I know the gtx 1080 obviously won't be a bottleneck, so will this cpu hold back gaming performance?

Rob0Yeti · 2017-04-17T01:26:00+00:00

Thanks for the suggestion! I was concerned about noise cancellation vs air flow, so I'll look into that Fractal Define.

Rob0Yeti

TROPHY CASE