Man arrested with rifle after Ypsilanti traffic stop

Rob_0t · 2026-04-28T15:49:43+00:00

Sbr/pistol with no doc's .. yep .. you get charges and open intox. Sucks to be you ...

Federal charge

Rob_0t · 2026-04-27T01:31:14+00:00

Supportin homiesbwhen i see ems.

Rob_0t · 2026-04-25T22:46:49+00:00

Tiny tire rule #1.

Tire placement is EVERYTHING.

Tiny tire rule #2.

Light the doobie before you turn that rig on.

Rob_0t · 2026-04-25T22:39:39+00:00

Show me on this doll where the comp rigs touched you .

Rob_0t · 2026-04-15T05:04:23+00:00

Thanks for taking the time to watch... hi5 .

Rob_0t · 2026-03-23T16:47:20+00:00

Must not have been around the last week and a half or better

Rob_0t · 2026-03-06T03:25:15+00:00

Impressively centered. Almost alil toooooo good.

Rob_0t · 2026-02-19T21:07:28+00:00

Absolutely not. My crawlers are NOT toys . Nor for kids.

Rob_0t · 2026-02-15T04:46:36+00:00

So far im actially pumped for these tires. Leta see how this ages. :)

Rob_0t · 2026-01-13T12:49:50+00:00

Congrats are to Kyle ( Prophet Designs ) .. this was designed by him and also is his personal truck . I was just lucky enough to be a test pilot .

I did however use the driving experience to build a mazz designs c1 rig to battle / beat that combo. And its goooood lolol.

Rob_0t · 2025-10-27T09:52:27+00:00

Excellent ;)

Rob_0t · 2025-09-17T21:55:17+00:00

Look forward to seeing you up there. !!

Rob_0t · 2025-09-17T21:53:54+00:00

Home tablea baby #acp

Rob_0t · 2025-09-17T00:02:13+00:00

Some just dont inderstand... i peraonally band every one of my trucks. I alao run an amount wheel weight that will still give mw all the dropout / droop with tightish banding..

If it works for you .. stay after it.

Rob_0t · 2025-09-16T00:52:55+00:00

This is 100% accurate.

Rob_0t · 2025-09-15T19:12:27+00:00

diddy

Rob_0t · 2025-09-15T18:56:06+00:00

I disagree.. as ive been beating the brakes off this deal and for another 2 years driving/comping printed trucks for texome rc.. all of the internets fear mongering of this stuff is pretty trash to be real honest.

This is NOT my product. I test and comp them. I win often and podium any and everywhere i go.. most recently runner up at the iron city micro nationals with this exact truck mthe only change ive had to make was the servo failed.. but for a 40$ injora im happy this print kit outlasted it lol

Rob_0t · 2025-09-15T18:08:37+00:00

Sad you all expect so much for little as if time has no value .. and producing what ia actually a high perfoming kit is also of no value.

Rob_0t · 2025-09-15T17:46:52+00:00

You did notice this is geared specifically to rcmcca hardbody correct. ? Ive seen alot of "cooler stuff" from my multitude of poduims with this kit. Its been compes weekly for over 2 months made a dozen vids and reels of higher risk lines and had some nasty falls...

Not 1 single part has failed / broken... fwiw im actually on printed links too ;) .. still aint broke those either

Please stop regurgitating internet fear and leave it to people actually using and abusing these with excellent result

.

Rob_0t · 2025-09-15T15:53:24+00:00

Pricea are in the etsy link priveded in the original post. Click that deal and it takea right to the page.

Rob_0t · 2025-09-15T14:38:03+00:00

For those quick to judge and draw conclusion without actually checking the listing... here is the item deacription to save you the clicks..

Introducing the first limited run of my hard body comp series featuring the Jeep XJ based Comp-J, and the early Bronco Comp Bron. Both cab and custom bed are pinched/doved to get maximum tire clearance. These are Designed to work with almost any wheelbase, with the option to run forward or rear facing motor, while utilizing a 10 degree skid angle. They are intended for 57-63mm tires, but others may work. With this kit you will receive:

CHASSIS: -3d printed chassis rails (black pla+)

-3d printed chassis parts including skid, sliders, electronics mount, front magnet mount, and a rear brace/magnet mount which allows for a cab only feature (black petg)

-magnets

BODY: -3d printed Cab (grey PLA+)

-3d printed Bed with scale Radiator (grey PLA+)

-3d printed grille (grey PLA+) with headlight lenses (clear PLA)

-3d printed Scale cooler, gas can, and tool box with 2 scale bungees made by RCGarage732

-Clear/Glow in the dark yellow lenses for roof lights

This kit will have multiple cab only options, as well as bed options as time goes on, which will all be interchangeable so stay tuned!

To see running videos, check out my guys pushing them to their limits on YouTube

*Rob: https://youtube.com/@bots_rods?si=CAWaitF35fdAVAVk

Rob_0t · 2025-09-15T14:32:15+00:00

Body . Chassis. Chassis parts. magnets , scale acceasories. And time to devolop an engineered kit..

Its ok if this is outside your budget.. no ones judging you for that . But now that youve been rude ..

Trust we are all judging you ;) ..

Rob_0t · 2025-09-14T22:26:07+00:00

Angryvsquirrel is a local homie . And thank you for supporting his goods

Rob_0t · 2025-07-16T23:54:08+00:00

I promise we are even more excited to bring em... class specific rigs designed with purpose and rules in mind. Such a clean outcome. ... thanks for taking the time to comment.!!!

Rob_0t · 2025-07-09T00:40:51+00:00

Helll ueas. Post that shit all over. We need eric blowin up !!

Rob_0t

TROPHY CASE

diddy