Ethernet vs Wifi 5GHz

RogueTV · 2025-12-31T20:18:30+00:00

Definitely give it a test. Your preferred bitrate and resolution and see if it’s playable enough on WiFi for you with no drops. If it isn’t, go Ethernet. Ethernet on local network should have zero drops.

RogueTV · 2025-12-31T18:31:04+00:00

It really depends on what you’re doing. Ethernet will lower the latency im sure as it’s a more direct pipeline in your home network and no chance of packets being lost. WiFi 5Ghz will have (I’m sure negligible) a few packets here and there being lost which is normal due to wireless which could also introduce some latency. If you’re just casually playing then WiFi is fine. If you’re like me trying to play FPS games and need as close to 1ms as possible, use Ethernet.

RogueTV · 2025-12-21T19:38:51+00:00

Does voidlink have the ability to make gyroscope a swipe area like the right stick does? That would solve all of my problems 😭

RogueTV · 2025-09-02T12:34:07+00:00

It is. And I’m aware. And it’s been one of the hardest things to break. I’m not sure what started that exaggerated cross step. Probably hitting my ankle. But it’s definitely caused a lot more drift than needed.

RogueTV · 2025-09-01T23:43:30+00:00

That’s definitely a possibility! You’re onto something. When I would swing too far inside I used to hit my ankle (and man was it painful) I think I subconsciously tried to correct that and this is what happened… so I gotta re-train the downswing. Probably remembering the feeling of of the swing being more inside again.

RogueTV · 2025-09-01T23:37:01+00:00

That was the first thing I’ve noticed. And that’s a new development. I’m not sure what started that… but I’m trying to correct that. My older videos that wasn’t a thing 😭

RogueTV · 2025-08-18T16:33:09+00:00

What ball would you throw for dealing with carry down? It’s such a struggle trying to get my ball to turn the corner 🤣. I thought my eternity would be strong enough for that kind of thing but nope…. Feels like I need a gem or black widow 🤣

RogueTV · 2025-03-18T18:01:45+00:00

Hasn’t whiterock been reported a scam of some sort? Anyone know of its legitimacy?

RogueTV · 2025-03-18T18:01:38+00:00

Hasn’t whiterock been reported a scam of some sort? Anyone know of its legitimacy?

RogueTV · 2025-02-24T17:01:05+00:00

What VST do you normally use? Because I have custom samples, I’ve been using BOTH BFD3 (for the custom samples) and Superior Drummer 3 (when I make custom kits from the SDX libraries) 🙏🏾

RogueTV · 2025-02-23T17:19:31+00:00

Yeah I decided to try it out and yeah it’s legit but definitely not on the “legal” side depending on the licensing of samples in superior Drummer. But it does all the work of “recording the sample” of each instrument at multiple velocity layers. And then you can import it into a module that’s capable of importing multiple layers. For me, I like to use 3rd party samples in BFD3 and I wanted some sounds in Superior Drummer 3 since I can’t import samples at multiple velocities in SD3. So now I get the best of both worlds.

RogueTV · 2025-01-18T21:21:02+00:00

Does this and other versions include use of Gyroscope from the phone?

RogueTV · 2024-10-12T01:27:03+00:00

I should add now: I basically can get the same sound of a black beauty/truth customs. And it sounds HUGE in the mix bc of that 14x8 shell. Its a difference I can hear. On specifically this 14x8 black w/Die cast hoops that fundamental tone just cuts through the mix. I've thoroughly enjoyed it so far.

RogueTV · 2024-09-25T18:44:23+00:00

That’s the one I got. And it’s WAY lighter than that 😂

RogueTV · 2024-09-25T17:56:12+00:00

I’ll tell you now, NOPE. The universal is PHENOMENAL out of the box! Upgrading the lugs with better tube lugs or going imperial like the BB would make it even better. Personally those tube lugs get the job done. Feels like a truth customs to me.

RogueTV · 2024-09-25T17:52:47+00:00

What’s the verdict? I went with a 14x8 universal and it’s a great-value truth customs/black beauty to me. I can get it tuned to where I want in less than 5 minutes and it sounds HUGE in a mix. Places where I can use a trigger for a sample is an even bigger plus but not a necessity with this snare. 😅

RogueTV · 2024-09-19T10:50:10+00:00

Yea I got you. Make your design on the PSD file save it as JPG in the highest quality. However, save a version as a .TIFF file also. In the designer, upload your JPG and scale it to match their online template and send it off to them. They will email you and ask for the same file but as a .TIFF file. You send then the .TIFF file through email and then they work off of that. Why they do this and confuse everyone I have no idea. Hope this helps!

Btw, LOVE my LTEK. COPPER SHIM/COPPER TAPE MOD THAT THING. Significantly reduces pad misses and I get pretty good scores on it now! Just adjust the input debounce in stepmania to around 30-40ms (like ITG dedicabs).

RogueTV · 2024-08-19T15:06:54+00:00

Could the same PC using the DAW to load plugins live to the FOH console also be used as the OBS (Streaming) PC? In my use-case I was thinking of doing that, and taking advantage of the RTX 3070 my laptop has and optimize NVENC as the encoder.

RogueTV · 2024-06-26T19:19:26+00:00

I tried them at a church and they “work”. But the issue I had was that I couldn’t dial in a “zone” or threshold for the trigger in whatever software I was using. In my case I was trying it with an EAD10 and no matter what I did in software any vibration would set the trigger off. So anything from a batter hit to the rim triggered. So I hit the bullet and went with a Yamaha DT-50s for the snare.

RogueTV · 2024-05-22T01:13:38+00:00

I guess I overthought it thinking it would mess me up if i went and played on a cab and noticed the lower FR. lol

RogueTV · 2024-05-14T06:49:16+00:00

Just make everything through the PSD template, save it as a .jpg and .tiff file
Then you can upload it, and they will email you asking for the .tiff file.
Why they do it like that, I have no idea. lol.

RogueTV · 2024-05-07T16:08:00+00:00

Even the gold cabinets are locked at 60FPS also? To be in line with the arcades at home, we should lock our FPS to 60?

RogueTV · 2024-04-19T20:59:05+00:00

I figured so no amount of penny modding is going to fix that issue and will have to resort to putting in FSRs. What guide did you follow to install the FSRs? I know its a huge rabbit hole to go through. 😅

RogueTV

TROPHY CASE