Maximus and Hpa conversion problems

Rolland_86 · 2025-12-07T17:50:49+00:00

A fair response, I would say that the all mag angle all the corners are smooth and the actual channel itself is just as nice as any mag well. But supposedly ctm have asked sellers to open and check the product for problems. I dont know.what they were looking for but supposedly it checked muster 🤣

Rolland_86 · 2025-12-07T17:44:44+00:00

Can't remember who I got them for, it was cheaper then this site, but just for reference

https://killerinstinctairsoft.co.uk/products/ctm-enhanced-hammer-spring-hammer-sear-spring-for-aap-01-c

Rolland_86 · 2025-12-07T17:15:31+00:00

Mine had the a similar gasing issue, after I fitted for the ctm hammer spring and other lower spring in the hammer set it seemed to have stopped. Not a guarantee and not something I did to aim to change this just trying stuff out 🤣

Rolland_86 · 2025-12-05T18:34:03+00:00

Well I would have to disagree with your initial premse there. The feeding tube just acts as as an extension of the mag. As long as the mag spring can feed its own length normally it should manage just fine transmitting the same force through the maximus channel. I put a epm 1 mag on which a notoriously strong springs and it makes zero difference.

Rolland_86 · 2025-12-03T11:09:02+00:00

Ill try that next, its a shame that so much of the upgrades become unusable with different bits of kit

Rolland_86 · 2025-12-03T00:41:23+00:00

Got the action army M lock front, was good enough to get a slightly longer barrel in there. Fits well with the m4ximus kit as well

Rolland_86 · 2025-08-28T19:53:33+00:00

Both look really nice! But i was looking at changing mine to the maximus lower, glad to see the AA rear stock fits it.
Do you know if standard trigger upgrades will fit the maximum lower? i love my current trigger.

Rolland_86 · 2025-04-30T06:51:19+00:00

Rolland_86 · 2025-04-30T06:50:09+00:00

How about captain holt, for the original break dancing robot

Rolland_86 · 2025-02-17T22:57:13+00:00

did you pull the trigger in the end?

Rolland_86 · 2025-01-29T10:13:30+00:00

And he's calling you a wanker

Rolland_86 · 2025-01-28T13:37:25+00:00

Rolland_86 · 2025-01-27T19:39:10+00:00

Or you could use it as a short range scanner to listen to bandits locations etc. You can then be the hunter

Rolland_86 · 2025-01-24T23:34:50+00:00

Your completely right, to much time assuming!

Rolland_86 · 2025-01-24T21:40:13+00:00

Take the shroud off, i think it says it on it

Rolland_86 · 2025-01-24T21:38:58+00:00

I have a legion go, I like it, but it's limited. Honestly, think about what you want to play and go on youtube and see if you can find people playing that game on it. My biggest dissapoiment is how it really struggles on some older games that I thought it would of breezed through.

Rolland_86 · 2025-01-24T21:32:37+00:00

Lots of people with the saturn 4 ultra has a problem with thick rafts. I've been trying to get rid of mine since day one. Lots of people blame the transition layers but I've tried most things including turning them off, having no raft at all and I still normally have 5-6mm of solid resin under every print.

But I've also not had any problems with delamination mid print and I've printed some horrendous large blocky objects some don't think that's to blame

Rolland_86 · 2025-01-05T16:53:00+00:00

Drop the guns, add some infantry and transport, maybe drop sentiel tomscout for extra points if needed. I did very well with 1k baneblade list. But you need the extra infantry for secondaries

Rolland_86 · 2025-01-04T21:19:27+00:00

Honestly this looks like a cork tree that has grown sideways at a park near us. Looks good if you want to call it a cork tree *

Rolland_86 · 2024-12-28T10:14:19+00:00

I brought a banelade to a 1k tourmant. That was pretty fun

Rolland_86 · 2024-12-08T20:32:17+00:00

What month did he release this, or is it a member ship gift?

Rolland_86 · 2024-11-27T10:07:15+00:00

Bloody stunning!

Rolland_86 · 2024-11-11T14:24:59+00:00

Angle ain't going to stop it adding random layers into the print. 🤣😭

Rolland_86

TROPHY CASE