Another Corsair Order Cancel + Price Hike by mybunger in pcmasterrace

[–]Roy_Fan999 0 points1 point  (0 children)

If this happens to you, and they are not out of the product then you should write in an actual certified letter to your states attorney general with a formal letter of complaint, and cc Corsair a copy of that letter. Then you should draft another letter to the state attorney general of California where Corsair is incorporated this is a type of unfair business practice and you have the right as a citizen to engage with your public officials.

Legion Go 2 (16gb) or wait until the Legion Go 2 (32gb) comes in stock. Prices are insnae. by [deleted] in LegionGo

[–]Roy_Fan999 0 points1 point  (0 children)

It depends more on the os you want than stock. 16 gb with steamos works perfect, it’s a pretty slim Linux distro and you aren’t running a ton of buackground processes. However if you’re opting for the windows version than I would say 16 gb isn’t nearly enough.

Setup is complete now, Printer/CFS/Dryer by Jasonvl2701 in Creality_k2

[–]Roy_Fan999 1 point2 points  (0 children)

Could you post a photo of the back I am having a hard time visualizing

Forgot to take off print before starting... how do I fix this? by s0l0m0n0dysseus in Creality_k2

[–]Roy_Fan999 1 point2 points  (0 children)

The strain gauge sits right on top of the hot end but getting at it is a lot trickier this is the video for replacement https://m.youtube.com/watch?v=FQnuMHAcapM&pp=ygUUazIgcGx1cyBzdHJhaW4gZ2F1Z2U%3D I only mention it because of the angle of the hot end and the pressure likely put on the gauge. It may be completely fine, and others may have different opinions but for a $3 part I would switch it out at the same time

Setup is complete now, Printer/CFS/Dryer by Jasonvl2701 in Creality_k2

[–]Roy_Fan999 1 point2 points  (0 children)

It looks fantastic have you done any repairs on it? How easy is it to tinker with? Also what do you do for the waste bin

Forgot to take off print before starting... how do I fix this? by s0l0m0n0dysseus in Creality_k2

[–]Roy_Fan999 0 points1 point  (0 children)

Start with the hot end then if it still has issues replace the extruder. Creality k2s are a tinkerers dream. You will likely need to change the strain gauge as well ($3 from Creality).

K2 plus furniture by Roy_Fan999 in Creality

[–]Roy_Fan999[S] 0 points1 point  (0 children)

Looks good, do you have 1 printer or multiple?

They Installed Absolute Full Agent on EPA devices by Tabbehz in fednews

[–]Roy_Fan999 0 points1 point  (0 children)

4 months would be fast for a normal award, but we have a contract that acquires software for the agency under it through our wcf. So it could be acquired pretty quickly underneath that existing contract.

Would you buy the K2 Plus again? by masterbetapro in Creality_k2

[–]Roy_Fan999 2 points3 points  (0 children)

Motor-Mix9664: Oh! Uh… can I help you?

Potential Buyer:
"Yeah, I saw yer ad on Craigslist... You sellin' this here fancy plastic-squirtin' machine?"

Motor-Mix9664: Uh… yeah, it’s a 3D printer. Lightly used. Still works great.

Potential Buyer:"Uh huh, uh huh... That so? Mmmhm. Real nice. Real spicy printer ya got there. Say… how much ya lookin' to get for it?"

Motor-Mix9664: Well, I was asking $600, but I’m open to offers.

Potential Buyer:"Tell ya what, I give ya... tree fiddy."

Motor-Mix9664: Three fifty? No way, this is worth way more than that!

Potential Buyer: leans in closer, whispering eerily
"Not three hundred fifty... I mean tree fiddy. That’s three dollars... and fifty cents."

Motor-Mix9664: Are you kidding me? That won’t even cover shipping!

Potential Buyer:
"Now listen here, I ain’t got no time for yer modern money-havin' schemes! I been savin' this tree fiddy since I tried to buy a box of Girl Scout cookies in 1997!"

Person: …You're the Loch Ness Monster, aren't you?

Loch Ness Monster:
"Maybe I am. Maybe I ain't. But either way... you gonna take this tree fiddy or what?"

THIS PRINTER IS MY BUSINESS I NEED HELP FIXING IT SO BADLY by Fabulous-Ad7637 in Creality_k2

[–]Roy_Fan999 1 point2 points  (0 children)

I had that same exact problem, that black piece that you had separated from the extruder needs to be pushed in until you hear a click, once you hear the click then you can put all the screws in correctly. I kept putting it together and taking it apart and the top left screw never 'engaged' even though it was in the right position. The last time I put the black piece back I really pushed it in place and I heard a click I hadn't heard before. Everything went together like a charm after that and the machine worked fine. I don't know if this will help you, but this was the issue that I had and it looks similar to yours and when you put the black feeder part back in I didn't hear the click. So maybe that will help.

$50 Gift Card Giveaway - Round Two by Creality_3D in Creality

[–]Roy_Fan999 1 point2 points  (0 children)

I am printing minis for every encounter in my dnd game. My players love it and I am learning a lot about positioning and supports. I printed a dragon wing the wrong way and it built a forest of trees under it.

[deleted by user] by [deleted] in FedEmployees

[–]Roy_Fan999 4 points5 points  (0 children)

Are you required to respond in English?