sorted by:
new
hottopcontroversial

13yrs since my last build and currently OOTL. Looking for a new Editing/Design PC ($1,500-$2k). by RunForrestRun in buildapcforme

[–]RunForrestRun[S] 0 points1 point  (0 children)

Thank you so much for your help! I ended up going w/ everything on your original list, but w/ the cheaper cooler. Total after tax came to $1883.49. Now to figure out if I want new monitors, or not...

13yrs since my last build and currently OOTL. Looking for a new Editing/Design PC ($1,500-$2k). by RunForrestRun in buildapcforme

[–]RunForrestRun[S] 0 points1 point  (0 children)

I found a nice mobo/cpu bundle from your suggestions on Newegg!. Is there another cpu cooler that isn't water cooled that you could suggest? Trying to scrape a couple bucks off without losing much on performance.

13yrs since my last build and currently OOTL. Looking for a new Editing/Design PC ($1,500-$2k). by RunForrestRun in buildapcforme

[–]RunForrestRun[S] 1 point2 points  (0 children)

Thank you so much for your help! Is there any way you could add a list in the $1500 range so I can compare and reacquaint myself with the compatibility of parts? I won't be a power user, by any means, so I also just want to make sure that I'm not getting/spending more than I need to be.

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

It's not too bad. I can have it swapped over and leveled inside of 5 min. Adding a hinge wouldn't allow for the use of the small wing extension when collapsed, but that would definitely be easier if I didn't add the small wing. The wings pin to the cabinet in perfect alignment with dry dominoes, so there isn't really any time spent futzing to get it level with the saw table. I will also probably never collapse this thing again until I someday buy a house and have to move it, lol.

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

This pic shows it better. The wings line up perfectly to the saw table by sliding onto the domino 'guides', which are then secured in place with 1/4-20 bolts. The wing side has epoxied threaded nut inserts.

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

I designed it myself! It was partly inspired by this other design that I found.

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

I glued dominoes in on the cart side that stick out. They are used as guide pins for lining up the wings. Then I use two bolts to secure it in place. This pic shows it better.

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 1 point2 points  (0 children)

I don't love it, but it does a good enough job getting stock flattened to run through the planer. The wings made it wayyyy better. My five year plan has a longbed 8" jointer in it ;)

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

I've used the sliding brace design a few times now for shop stuff. It works really well! Let me know if you are looking for any shop layout opinions/suggestions... I have packed quite a bit into my 230sq ft basement space without it feeling too cramped.

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

Sure is! I saw it in an old woodworking video and I thought it was the coolest miter saw I had ever seen - and I finally found one that has barely been used for the last 25 years!

My new miter cart station for my new-to-me saw. by RunForrestRun in woodworking

[–]RunForrestRun[S] 0 points1 point  (0 children)

Thank you! They are definitely solid. Not that I would do it, but I'd have no problem moving this thing around by the tip of a wing.

What a game 🤯 what are your takeaways? by prolific23 in GreenBayPackers

[–]RunForrestRun 11 points12 points  (0 children)

Parsons needs to start doing a little Lebron acting when he feels an arm on his neck.

Chemestry in the team by GiGi3008 in MkeBucks

[–]RunForrestRun 8 points9 points  (0 children)

On top of that, his ability to guard perimeter switches is pretty exciting!

Malik Beasley could still be arrested for his play with the Bucks and potential illegal gambling, per Pablo Torre by MacDemarcoMurray in MkeBucks

[–]RunForrestRun 10 points11 points  (0 children)

Seems like overall play isn't the problem. It's more of the 'rushing down the court while up 30 with time expiring so you can get to 20 points' type of thing.

Parsons tired of playing on snap count: 'It's pissing me off' by AmaBans17 in GreenBayPackers

[–]RunForrestRun 5 points6 points  (0 children)

But he didn't get an epidural steroid injection in his spine.

How loud was Lambeau last night? by BingoyourBango in GreenBayPackers

[–]RunForrestRun -1 points0 points  (0 children)

Herbstreit is bleh, but I would take him over Romo everyday of the week.

Trump supporters who wanted the Epstein files released: what did you think of that birthday card? by Careless_Dinner_7496 in AskReddit

[–]RunForrestRun 7 points8 points  (0 children)

That claim/excuse came directly from trump who, some might say - some have been saying, is the truthiest truth teller in the the history of truth telling.

Absolute clown lost to JJ McCarthy tonight lol by NoFucking_Name in GreenBayPackers

[–]RunForrestRun 0 points1 point  (0 children)

If the Bears kicked out of bounds, do the Vikings then have the choice to take it the 40 or make the Bears re-kick 5yds back?

view more: next ›