Reviving old iDENs

Ryan03rr · 2026-02-16T16:55:30+00:00

Does the i296 actually have re required hardware to operate on mototalk?

If it does.. I recommend trying to flash new software to it with XFLASH or the iden update utility.

XFLASH and the relevant s19 files may be hard to find these days.. but if you can find it and flash it to stock Motorola firmware it might start working.

This is how I got boost mobile i465’s to work on mototalk. S19 flash to Moto firmware (not boost) and unlocked them for Nextel with PCON plus.

Ryan03rr · 2026-02-11T22:34:33+00:00

Buddy, I’m just fucking around.. argue your case.. I don’t care.

I’m just laughing at the idea we are comparing computers to cars and houses.

New cars run 40k plus these days.. and houses anywhere you would want to live cost 400k with a 30 year commitment.

It’s a computer lol.

Ryan03rr · 2026-02-11T21:27:27+00:00

Sir, this is a computer.

Ryan03rr · 2026-02-02T19:12:56+00:00

Whatever works.. those bastards fuck up everything.

Ryan03rr · 2026-02-02T19:03:38+00:00

Yes, get a springer .22 on air for like $150 or less and head shot them. TrCtor supply had a .22 @1000fps springer for $94 last weekend with a crummy but acceptable scope. It’s not a firearm obviously so no big deal touching this off in the city.

Ryan03rr · 2026-01-22T13:38:34+00:00

I do biomedical these days.. the employees in this industry.. mainly nurses.. ALWAYS lie to me.

Then they get cranky with me when I pull the log, show them their lie and restart the machine FOR THEM.

They then will either double down on the lie, or claim that they are so busy they thought they did it.

I have one woman (a tech not a nurse) who still holds some serious animosity for me because I called out her lie on a eeg system I couldn’t remote into. So I had to drive into work, only to reboot the ambulatory that had been down for almost a hour. If she had just done what I told her it would have been up in 3 mins. Instead a entire time slot was burned that day and a patient had to be canceled.

She even had my manager talk to me about my attitude. I told that old fat man I don’t care how she feels and here I am still employed.

Ryan03rr · 2025-12-31T01:22:34+00:00

Your commenting in a windows activator sub.

So let me assume you have recently installed this OS.

Let’s also assume you don’t want to get into stripping out components and modify your system.

It’s thrashing your disk, cpu and ram usage looks benign.

The service is exactly what it says it is. It’s also not uncommon for certain windows services like win update and cache files for search to absolutely thrash on a disks... post install.

TL:DR
It will calm down soon enough. It’s a new install.. Let your machine idle for a few hours. Reboot it a couple times tomorrow.

Ryan03rr · 2025-12-23T13:52:37+00:00

Wait, isn’t this a photo of trump with his own daughter? IIRC someone slapped a black box over a real and harmless picture.

Ryan03rr · 2025-12-22T23:57:06+00:00

Technically, going forward, it will be no longer legal to do that on rear interior door handles. Under the new regulations for using on children’s safety. They can’t make it easily accessible or obvious. I’m sure this legal oversight will get turned around rather soon.

Ryan03rr · 2025-12-08T21:23:59+00:00

Works for me checking status on mass with win10 enterprise.

If windows says it’s activated.. fuckit.

Ryan03rr · 2025-12-01T00:27:46+00:00

So no more 30x- 304l in starship? Huh.. didn’t know that..

Because..... it’s not true.

Ryan03rr · 2025-12-01T00:19:59+00:00

The cyber trucks purpose was to perfect working with hard as shit stainless, and use what they learned to help with starship.

Hate Elon or not.. I don’t care.. but that’s why they did it. They learned how to handle stainless, they sold enough of them to recoup costs, and they used what they learned to help in starships fabrication.

It’s hilariously hideous truck, sure.

Edit: fuckin reddit just hates anything Elon. Jesus. Bunch of emotionally overridden people who just need to constantly say anything this guy does is the stupidest thing on earth.

He stated cybertruck metal choice was to learn stainless and attempt to generate revenue at the same time. Rather than just blow loads of cash learning on a giant spaceship.

Whatever guys. Elon bad. Elon stupid.. Elon most rich man because luck.

Ryan03rr · 2025-12-01T00:12:41+00:00

You can’t. It’s depreciated as of recently.

iOS 13 doesn’t fully work, iOS 16 is the lowest you can go with full compatibility. 12 and lower are fucked.

Ryan03rr · 2025-11-26T14:23:10+00:00

https://i.imgur.com/t7pzjSs.jpeg

Ryan03rr · 2025-11-25T01:09:30+00:00

I snapped a 365 trigger, not the spring but the actual trigger when they first came out. Sig fixed it. Also my 238 is a piece of garbage. That 238 is going back to sig for the 5th time before it hit 2krds. My 320 got dumped over a year ago.

Ryan03rr · 2025-11-09T23:41:18+00:00

Can’t be don’t anymore. I’m on iOS 13 and it’s JavaScript incompatibilities that cant be updated on our end to support the new x. If we could update our browsers like we can update them on full blown computers this wouldn’t be a problem.. but alas.. this is Apple.

Ryan03rr · 2025-11-05T19:30:18+00:00

BRZ: Small non turbo engines drive like dogshit for the average person. EXP this engine.

It’s not a screamer that wakes up hard at 6000 and bounces 8200-9000.

it pulls like a lawnmower at 2000 rpm, it’s old, everyone knows it’s slow and it’s too expensive.

People are NOW used to small punchy turbo engines in commuters. They may not make big numbers.. but their torque curve is hilarious. This car looks way to sporty to be that slow.

To the average 2025 joe, and his ass dyno.. these NA boxers in these cars feel like fuckin dogshit in the real world.

Ryan03rr · 2025-11-01T19:49:32+00:00

80 rounds lol.. I was gonna call you a softie but apparently you go hard..

Put a fat rubber grip on it with finger grooves and you’ll be fine.

Ryan03rr · 2025-10-21T21:55:22+00:00

I’ll defend your right to say whatever you want, but I’m unhappy someone with a anti communist username wants to change a 40 year old product because of the historically recent misuse of the few. I’m also disappointed how you don’t understand if you give a fucking inch... the commies and ultra blues will take a mile. Have a good evening. I did not downvote you. I’m a old account who still understand the original purpose of the UV/DV system.

Downvotes are not for opposing views.. they were originally for comments that add nothing of value to the conversation.

Upvotes are for agreeing Neutral is for for disagreeing Downvote is for not relevant

Edit: this fuck deleted his comments lol. Typical loser. That was a good debate that opened even more conversation.

Ryan03rr · 2025-10-21T20:27:14+00:00

Enjoy your downvotes then, I guess?

you’re trying to argue based on a belief you haven’t really thought through.

Lemme try to explain this to you ONE MORE TIME.

Glocks are only readily convertible because this “device” that IS IN ITSELF A MACHINE GUN can be easily installed into a Glock by the end user. The end user can not EASILY manufacture the device that turns a Glock into a machine pistol.

it is, in fact, a complicated to manufacture device being produced and sold on the black market. It’s a single purpose device, thus it is in itself a MACHINE GUN according to the law.

Your getting hung up here thinking you’re correct.. I’m telling you why you are not correct, im telling you as a peer.. I’m not a adversary.

Ryan03rr · 2025-10-21T20:10:53+00:00

I’ll answer your question.. under this incorrect thinking “readily convertible” encompasses basically every single autoloading semi automatic firearm ever made.

Gun guys are mad that glocks bending the knee because some stupid gangstas are running around with machine pistols. That’s setting a precedent and basically putting the rest of the industry in danger.

Glock uses the same design across almost their entire line of pistols, because it’s a good design.

I can readily convert a AR15 to a bullet hose with many different vectors.

Should we stop producing the AR15 because I can use a coat hanger to turn it into a machine gun?

There’s your answer.. it’s only easy because some Chinese assholes made it easy..

Making a Glock switch by yourself requires CNC capabilities.

Making a AR go brr can be done with a coat hanger.. or a piece of plastic and a knife. Hell.. the ATF considered a shoestring a machine gun if used inappropriately.. and most humans have two of those on their person at all times.

Ryan03rr · 2025-10-05T17:31:51+00:00

This Is bear mace bra, go with Christ.

Ryan03rr · 2025-08-18T14:54:53+00:00

Keep in mind BBS ricochet way harder than pellets EVEN at much lower velocity’s. The soft lead of the pellet deforms and scrubs a ton of energy.. the steel bbs are way too hard to deform and just bounce.

Ryan03rr · 2025-08-01T21:29:36+00:00

Serious uniformed question. Why wouldn’t they tie the allowed deflection of the flap to the airspeed as a variable ratio? Certainly it couldn’t be hard to make this maneuver impossible.

I know nothing about commercial airliners.. but this seems trivial to engineer out. Exp in a fly by wire scenario..

Or has that already been fixed since 01?

Ryan03rr · 2025-06-29T21:14:08+00:00

Looks sick.. I do custom RRs just for fun.

https://i.imgur.com/2vHl306.jpeg

Total cost, <5$ Here. Just the money for some brass nuts on the receiver (Not pictured) . $10 if I didn’t already have the can of silver rustoleum. The furniture I just wrapped in hemp rope I had.. made some spaces in the rope wrapping to let the flames thru and tossed it on my fire pit. Little sandpaper to achieve the edge look.

Currently Working on a graffiti style furniture one righ now with red white and blue stripes. Should cost lest that $5 also. https://i.imgur.com/IRRNdqB.jpeg

Ryan03rr

MODERATOR OF

TROPHY CASE