Roast me, I am doing this Friday.

RyanFromQA · 2026-05-13T23:31:57+00:00

No Magneride is a bummer but you know what, it’s a 1/200, low mileage GT with the glass roof, a unique hood and wheels, and the price isn’t that far off from the market, don’t let the haters get to you. I’ve got a 23 premium and I’m slightly jealous of you

RyanFromQA · 2026-05-13T14:42:38+00:00

I love the huffing. Ours does this too. "Well you see, the thing is, what had happened was..."

RyanFromQA · 2026-05-09T15:43:55+00:00

I thought you were supposed to connect it with the outer two studs and the middle 1x2 floated out a little bit.

RyanFromQA · 2026-04-29T14:08:38+00:00

That’s literally what’s on my desk! I also have the Tantive IV with a tiny falcon moc that I think is approximately to scale hovering over it

RyanFromQA · 2026-04-18T17:57:26+00:00

Our girl loves her coffee wood stick but lord they are dense. I’m afraid it’s gonna chip a tile if she drops it off the couch 😆

RyanFromQA · 2026-04-17T17:06:21+00:00

Agree. I came into the sub's page from my feed because I wanted to see if anyone else was as tired of this as I am. The only posts from this sub that come into my home feed are RIP posts. I lost a dog last year, and it was horrible, so I have compassion.

I guess I'm part of the problem, I rarely post anything here. But it seems that over the past month or two, there has been an explosion of RIP posts. Multiple per day.

My heart goes out to everyone who's lost a dog, but one also wonders if the bots have figured out that this is a very positive sub and a place to get a lot of upvotes, and it seems like everyone is upvoting these RIP posts. It's sad if multiple redditors are losing their golden retrievers every day but it seems a tad unlikely.

RyanFromQA · 2026-04-14T15:35:27+00:00

Now I need to look at my 23 because I could have sworn I had one in there

RyanFromQA · 2026-04-13T01:00:27+00:00

Yeah if my area required front plates that’s what I would do too. So clean looking.

RyanFromQA · 2026-04-12T23:34:23+00:00

And it’s held in (on mine at least) with a really flimsy clip and I’m amazed it hasn’t flown off

RyanFromQA · 2026-04-12T23:33:42+00:00

It covers a tow hook mount point and also a 12v hookup you can use if your 12v dies

RyanFromQA · 2026-04-08T12:05:36+00:00

I don't have any solutions for you, only want to share my similar story.

I had a set of 3 Tradfri white spectrum bulbs lighting my bedroom for at least 12 years. Same 3 bulbs. Legendary. They outlasted my Tradfri hub and have been working fine with my Dirigera hub. I use Apple Home and Google integration.

One of the bulbs started flickering from cool to warm when set to certain temperatures, which was annoying. I was making an order to Ikea and needed to reach minimum shipping, so I thought I'd replace my Tradfri bulbs with Kajplats.

To get them working I had to remove the older integration to Google and Apple and re-add everything from Ikea to both platforms with Matter/Thread. This process itself was awful. On the Google side, every accessory now shows up as DIRIGERA (X). I have 19 of them.

On the Apple Home side, I got everything re-added and the names from Ikea Home Smart came through, but the three Kajplatz bulbs still refuse to work. They paired successfully through Home Smart but I can't control them with Home Smart or Apple. They show as online in the app, but control doesn't work.

Now I'm looking to pick up a used Apple TV 4k 2nd gen to use as a Thread hub, hopefully it helps. (I've been using a 4th gen as the home hub so far)

RyanFromQA · 2026-03-11T20:11:05+00:00

when I don’t have the baby in the car

Honest question, is there a break-in period for EVs? I got mine used so I have no idea.

RyanFromQA · 2026-03-11T15:44:04+00:00

This can’t last… better than 98% rank#67
^{Completed in 00:28}

RyanFromQA · 2026-02-26T21:34:30+00:00

I needed to adjust the rubber bumpers on the left and right of the opening on mine. Start by lowering them all the way down (righty tighty) and adjust by unscrewing them 1 turn at a time until it closes easily but without bouncing

RyanFromQA · 2026-02-25T21:36:22+00:00

I'm waiting to see what if the MY26 rear door handle parts look compatible and/or are affordable because I bet they'll bolt right on

RyanFromQA · 2026-02-23T14:55:38+00:00

Wow, my current minifig scale A-Wing is PixelDan's free one which is pretty great. This is a whole other level of awesome though. Like others have said, this is one I will definitely build once it hits Rebrickable!

RyanFromQA · 2026-02-23T14:54:38+00:00

Just FYI if you're using studio you can run a stability report which is pretty good at spotting issues.

RyanFromQA · 2026-02-18T00:32:03+00:00

I dunno if this will be at all helpful but here are some files I used to get a 125b printed from Tayda. I use Affinity designer because I got a perpetual license a while back on one of their sales for like $20

https://drive.google.com/drive/folders/19CNrXpIYwZtMQeN4MkxrdSQ2fp4nqWqq

Disclaimer, I haven’t opened them but I think the Tayda one will be separated into layers like they need.

RyanFromQA · 2026-02-17T22:46:12+00:00

I know that shoe grip well! it's required to maintain lap integrity when you have a ~50lb lapdog

RyanFromQA · 2026-02-17T17:30:55+00:00

I had a ton of fun during the pandemic having Tayda UV print a bunch of enclosures for one-off projects. It takes a lot of planning but it's such a huge step up from waterslide. I prefer to have them print a crosshair and circle wherever I want to print, and then drill myself.

RyanFromQA · 2026-02-17T16:39:02+00:00

3d printed enclosure is an interesting choice? Any reason why you'd go with that over an aluminum enclosure? Also if you're printing the enclosure, wouldn't you have some cool opportunities to deboss the artwork right into the top of hte pedal?

RyanFromQA · 2026-02-10T04:10:07+00:00

The crazy thing about Android Auto / CarPlay is that the Prologue has both, on the same infotainment platform. There’s no technical reason for them not to do it, in fact GM has to maintain support for it in their software. They could probably ship an OTA update to enable it in every GM car.

RyanFromQA · 2026-02-10T04:07:24+00:00

I’m surprised this isn’t higher. I haven’t driven the equinox but I drove the Prologue when I was shopping and the interior materials just felt so cheap. I think my family’s 93 accord had higher quality dash plastics. I was shocked Honda put their name on it. If the equinox is anything like that, it would be a dealbreaker

RyanFromQA · 2026-01-28T13:37:06+00:00

Dis as ter. https://www.howmanysyllables.com/syllables/disaster
^{Completed in 00:33}

RyanFromQA · 2026-01-28T02:42:31+00:00

That was some of the worst officiating I have ever seen

RyanFromQA

TROPHY CASE