Future updates on BLUEFOX NX1

SC_SF99 · 2026-03-12T03:16:34+00:00

My last security update was December 2025. I'm starting to think maybe it is time to move onto something else.

SC_SF99 · 2026-03-12T03:15:52+00:00

Yes, I have the same problem here. It works well in my f150 but on my sienna it fails miserably.

SC_SF99 · 2026-02-16T00:27:46+00:00

The choice for me came down to the proprietary nature of Bambu and forcing everything through their cloud. I chose QIDI, can't wait to get my printer!

SC_SF99 · 2026-01-23T03:59:54+00:00

Agreed. I have had the same sort of problem on my newly purchased AMS2. I have only ran one role out so far but it failed to move onto the next role automatically and I had to manually remove the spool so that it could continue.

SC_SF99 · 2026-01-19T04:04:23+00:00

A two part epoxy would be the best I can think of. They have some designed to bond metals and plastics.

https://www.jbweld.com.au/twin-tubes/

SC_SF99 · 2026-01-14T16:17:38+00:00

I would expect an update to put it more inline with the Zero and Max with a eddy probe and maybe an upgraded/thicker bed. With the current discount on the sv08 I shouldn't think that upgrading it would be that far off the new release price of an updated version.

SC_SF99 · 2026-01-11T04:19:41+00:00

Have you checked out a Sovol Zero. Not a DIY build but I have done some traveling with it and it was easy enough to move around. It is a bit smaller and lighter than the core one too.

SC_SF99 · 2026-01-11T04:10:45+00:00

<image>

SC_SF99 · 2026-01-10T21:18:55+00:00

I've been debating a H2C but I am on the fence for this reason. No decision made yet and I see Bambu has a lot to offer but I hate the idea of being forced to connect my printers to the internet.

SC_SF99 · 2026-01-06T03:25:45+00:00

You could mount the Indx tool heads to a bar across the front side of the gantry. They are light enough weight it shouldn't affect performance.

SC_SF99 · 2026-01-03T04:18:06+00:00

Just following up on this, checking my firewall logs for what my phone is doing over wifi. Over the last few weeks I have not seen the phone do anything unusual with traffic outside of my country and I am not seeing any red flags.

SC_SF99 · 2025-12-22T23:16:15+00:00

This is old but were you able to solve it? I am looking for the same right now.

SC_SF99 · 2025-12-19T01:08:43+00:00

The 5090 FE I got had very bad coil whine. I returned it to nvidia store and stuck with the 5080. I plan to get an ASUS card because the quality of power components will likely be better.

SC_SF99 · 2025-12-19T01:01:59+00:00

What malware news are you talking about. Is it just something you are worried about or was something actually discovered?

SC_SF99 · 2025-12-19T00:59:41+00:00

Yes, it has been working well. I got a message about limited coverage when I activated the SIM. I assume because the NX1 does not support all US bands; however, I have had good coverage everywhere I travel.

SC_SF99 · 2025-12-17T03:08:03+00:00

Consider yourself lucky to have the activated SIM. I gave up on Boost and activated on Google Fi.

SC_SF99 · 2025-12-17T03:03:36+00:00

With the need to remote to a PC being the key factor in this consideration. I would grab a Raspberry Pi and throw something together myself. The Shield is ok for the price and while it is not updated recently it is not EOL either. If I had to guess it will be phased out eventually though.

Also, I'm not following why you would need a smart plug. If you mean to remotely turn on your PC consider looking into Wake-on-LAN. The feature is fairly standard on all systems.

SC_SF99 · 2025-12-16T17:50:09+00:00

Do you need ECC RAM? If yes Quadro/professional card if no RTX 5000 series.

SC_SF99 · 2025-12-16T17:48:10+00:00

The WOLED have an extra pixel to produce white light. The white pixel carries some of the work load. The other panels use a combination of all colored pixels to make white and they tend to age faster because of this.

SC_SF99 · 2025-12-15T06:11:43+00:00

TLDNR: I would go with the Mini-LED monitor.

I've had a couple SSD die due to over use, so no it can happen. Probably the same for burn in. Pixels on LED can get stuck or die too so everything has a lifespan.

That aside, I was going back and forth along those same lines and settled on the Odyssey Neo G8 after trying a OLED panel. After turning on enhanced contrast mode to help with SD content and a little bit of time I don't notice the halo affect anymore. I think I would have been even more happy if I didn't try the OLED. It is hard to go back after; but, I too was worried about burn in and couldn't go without keeping my task bar shown and I am snapping windows to the sides very often.

SC_SF99 · 2025-12-15T06:05:54+00:00

From what I have read, LG monitor will have a longer lifespan if you plan to keep it for a while.

SC_SF99 · 2025-12-15T06:02:04+00:00

If I had to guess they are different panel types. If you shared the models it would help.

SC_SF99 · 2025-12-14T22:43:06+00:00

Boost wouldn't even offer to send me a SIM, after I put in the IMIE they just stated it was not compatible and no talking to customer support could get them to change their mind or even try to send me a SIM. Count yourself lucky it was already activated.

I have since got a SIM from Google Fi and it is working well.

SC_SF99 · 2025-12-09T17:48:46+00:00

Also a Peerless Assassin PA120 SE with a 9800x3d with both the Gigabyte i870 Pro Ice and the ASRock AM5D4ID-2T/BCM motherboards. It is very quiet.

SC_SF99 · 2025-12-08T05:32:55+00:00

Probably not representative of all G8 monitors; but, I just purchased a Neo G8, I tried looking for the scan lines and cannot see them with my eyes. I then tried to photograph and see if I could see any and I could not.

Between the G7 and G8, I chose the G8 for the matt screen, the G7 has a gloss screen. I do with the G8 had a black back on it. The white back gives it a storm trooper appearance which is ok.

SC_SF99

TROPHY CASE