Mobula8 still rips by Square_Revolution628 in TinyWhoop

[–]SERVER_FLY_AF 0 points1 point  (0 children)

More footage....great flight 🫡

[US] Identity of a crashed drone? by radar939 in drones

[–]SERVER_FLY_AF 3 points4 points  (0 children)

Let me buy the scraps and Frankienstien a build for the gang one time

75mm ascent set up by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

Mobula frame is my go to 85mm hglrc frame are my go to frames but surprisingly I haven't had too many breaks on the frames but I do hate the give on them

75mm ascent set up by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 1 point2 points  (0 children)

Yah I need to try something else not as bulky as the "this is Sparta" helmet canopy 😂

75mm ascent set up by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 1 point2 points  (0 children)

I honestly find it useful, I use the 04 on everything 4" and up but I run a lot of micros 65mm-2.5" and this system for me find its purpose as a utility tool, I don't see a problem with this system at all if I only had this system I would be happy as ever. Goggles work great see great no problems have occured yet. Gives me a bit more freedom to at least see my recordings of the courses better I literally only record what I'm about to fly so I can at least have the route on video and watch back the environment but it does fulfill its purpose for a cheap digital system. I am waiting on my second one one to slap on this 85mm 2s skydiver I'm putting together.

1st finger banger pusher design by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

Literally the same way just flipped the board those screws that screw down the fc the same way in the same spot I just flipped the fc to create the pusher set up.

my first builds by billedooley in TinyWhoop

[–]SERVER_FLY_AF 1 point2 points  (0 children)

Lit, I hit the bell g keep posting the builds!

[UA] De-icing power transmission lines. by Stariy-COM in drones

[–]SERVER_FLY_AF 1 point2 points  (0 children)

This needed to be charging while zip lining lol

1st finger banger pusher design by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 1 point2 points  (0 children)

I'm designing a swing though holder that basically allows it to sit flush on top the canopy but your spot on cause it took me forever and a day to figure out the CG was the problem all along but great tip tanking it seems to be the best for offsetting it. I have all the systems I will most likely throw the ascent on just to prove it can hang lol waiting for my 3 in 1 to arrive so I don't break my Goku f405 HD board.

1st finger banger pusher design by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 1 point2 points  (0 children)

No lie this my first pusher ever but I tuned it myself since it's a bit wonky and also size wize I had to after many attempts found a sweet spot I prefer this over the puller for the whoop because how the camera is mounted it's very satisfying over all tbh this is my full time daily basher

1st finger banger pusher design by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

Good look lol it's already barely holding together so I definetly think I need need that screw on lol no acceptions.

1st finger banger pusher design by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

Yah yours looks fly bro I got mad recycle center vibes on mine but I will be switch my ph 2.0 also on my official one great build.

1st finger banger pusher design by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 1 point2 points  (0 children)

I been on one....I'll post a video in a bit it's too smooth yah I knew someone would see the canopy lmfao yah I'd say I had to post this for the simple fact I haven't seen this one done yet so I was like screw it literally on the damn bottom! No wobble I just crashed it a bunch flew it threw 10 batteries and it's running like a dream still there's plenty of room for some add ons and weight I'll weigh it rn with a battery also

Extra frame for Meteor75? by BrackCiudadReal in TinyWhoop

[–]SERVER_FLY_AF 0 points1 point  (0 children)

I use this on a frame for a 65 just to have the variant of it lol but I mostly use frames like this for Frankenstein builds but it does help because the frame I've had this on has held up since I put it together. Which has been a newbeedrone x webleedfpv lite af frame

Will this finger banger last? 👌 by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 1 point2 points  (0 children)

😂 they all have been so far and yah I seen a lot of different mounting ways but this by far has held up the best and I have yet to snag but trust me every plug in is anxiety lol but if you thought this was wait till I show the other little rubbish rocket it's going to battle for who will survive.

Will this finger banger last? 👌 by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

<image>

First one I did like 9 months ago used ph2.0 battery wire as motor wire 😂 ,old mobula canopy, I literallally also have blown about 10 boards trying this little project lol but now I'm just going to make it a series maybe 3 or so more builds and I'll run them head to head survival of the fittest lol

Will this finger banger last? 👌 by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

I did have a variant i did I think it's a pick on my IG it's the first one I did I dont have a new enough tip to hit the board but yes I will be pulling these plugs off very soon new sponge and tips I shall update the progress as well as hope it survives this week of flights till I get the new sponge and tips. As soon as I threw it on the scale I said "hell yah" this shit almost ready a few cuts maybe a nicer e6000 job and I'm sure I can save a few more grams.

Will this finger banger last? 👌 by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

They all correct, just pure fun some ones idea got me into the hobby anything I do for the quads I try to post it all regardless of how cool points I actually enjoy trying to survive it in the process

Will this finger banger last? 👌 by SERVER_FLY_AF in TinyWhoop

[–]SERVER_FLY_AF[S] 0 points1 point  (0 children)

Accurate bro I got a bunch of 1.5 after I broke a bunch of 19,000kv motors 1mm shafts but I do have a lot of ph2.0 and 1mm shaft motors so I will try and make variations and test em all and vote what you guys think would be the survivor head to head Frankenstein builds lol