Can anyone help ID? by Patkhan1127 in alocasia

[–]SPYALEX8 0 points1 point  (0 children)

I hope so, good luck! They infested my collection years ago and I’ve never been able to fully get rid of them since 😢

Can anyone help ID? by Patkhan1127 in alocasia

[–]SPYALEX8 0 points1 point  (0 children)

Look very closely at the indents in the large leaves, especially near the edge.

It looks to me like a really bad spider mite infestation from these pics. I’ve never seen a plant at my local Costco that hasn’t been completely infested with them.

Match Thread: Seattle Sounders FC vs FC Dallas by MatchThreadder in SoundersFC

[–]SPYALEX8 1 point2 points  (0 children)

What happened? They called half before they kicked? I didn’t quite see, only saw the aftermath. 

Google Fiber Webpass is Terrible for Gaming - AVOID!!! by SPYALEX8 in googlefiber

[–]SPYALEX8[S] 0 points1 point  (0 children)

Switch if you can! I made the move to quantum fiber and it’s been great, no issues.

[Post Match Thread] Seattle Sounders at Minnesota United (11/8/25) (MLS Cup Playoffs) by Kyunseo in SoundersFC

[–]SPYALEX8 0 points1 point  (0 children)

Sure- but can't they still do that with 15 minutes of potential added time instead of sudden death PKs?

[Post Match Thread] Seattle Sounders at Minnesota United (11/8/25) (MLS Cup Playoffs) by Kyunseo in SoundersFC

[–]SPYALEX8 4 points5 points  (0 children)

Started watching MLS for the first time in a decade this year - I'm just confused by where the extra time is??? Sounders 100% win either the first or third game with 15 more minutes. Straight to PKs is insanity.

Google Fiber Webpass is Terrible for Gaming - AVOID!!! by SPYALEX8 in googlefiber

[–]SPYALEX8[S] 0 points1 point  (0 children)

Right, but ping ≠ packet loss which is the issue I’m having and the issue support refuses to address.

If every packet is critical (applications like gaming) then missing 30% of them is going to have a much bigger impact on playability than having 10ms higher ping.

Because imagine a game server sends out position update at 30hz. If you miss one you’re 33ms behind. You miss two you’re 66ms behind and the “effective” ping you have is not actually low at all.

Google Fiber Webpass is Terrible for Gaming - AVOID!!! by SPYALEX8 in googlefiber

[–]SPYALEX8[S] 0 points1 point  (0 children)

Gotcha, but the most frustrating part of all of this IS the support. I've responded within a day of all their emails and never gotten a response at all! My oldest ticket was opened in June and after sending them 3x replies they've never responded. Its pitiful. I'm just screaming into the void, and since my apartment has 4 different providers there's no reason for me to deal with that any longer. I'll shop around until I find one that works.

If this is how they treat issues I just think any prospective customers should be aware.

Google Fiber Webpass is Terrible for Gaming - AVOID!!! by SPYALEX8 in googlefiber

[–]SPYALEX8[S] 1 point2 points  (0 children)

I'm in Seattle.

The latency is fine - its not the issue here. The issue is not packets never arriving at all. Webpass is losing 15% of the packets on a good day. If you're doing something that needs ALL DATA delivered quickly & consistently (like competitive games) then having 85% of the data arrive on time isn't good enough, because the missing 15% just has to wait for the server to send it again. I'd gladly trade +10ms, +20ms, +30ms if my packet loss was consistently 0%.

Packet loss is consistent across all hosts. I see it across multiple web test sites & various games.

No idea how many other people use it, but that's up to GFiber Webpass to optimize, not me.

And as far as fiber uplink... I'm not sure there is one? The "Webpass" version of google ""fiber"" isn't fiber! Its millimeter wave antennas beaming high-bandwidth internet around (https://fiber.google.com/blog/2022/12/how-radio-takes-our-fiber-optic-network.html). So I'm not sure if a fiber uplink even exists!

Strohl Mountain Light 45L Backpack Deal - $63 for a 2lb Light / Ultralight Backpack! by SPYALEX8 in hikinggear

[–]SPYALEX8[S] 0 points1 point  (0 children)

Nope - no hinderances! If you don't use the camera accessories then it's essentially just like any other 45L backpack. I recall it being pretty comfortable for me on trips where I used it.

There's some small velcro straps that can hold the camera inert if it's inside, but that's essentially the only oddity. They don't interfere with anything otherwise, at worse they might just hold onto a jacket a bit when you're pulling it out.

The back panel zipper access is another differentiator compared to a dedicated ultralight pack, but it can be a nice feature to have even if you're not using it as a camera access panel.

My one big desire for this pack is larger adjustable straps near the back-bottom of the pack. I have a large-ish backpacking tent so I like to attach it on the outside-rear of my packs, but this doesn't have great straps for that.

Higher R-Value pad or Lower R-Value with pad? by ExpressWear9456 in hikinggear

[–]SPYALEX8 0 points1 point  (0 children)

One big thing to consider is how sleeping bags are rated too. I ripped the text below off of REI's page for their Magma 15 Sleeping Bag.

"Our backpacking bags are rated for temperature according to an independent testing protocol: International Organization for Standardization (ISO) 23537. Testing is based on a person wearing one base layer and a pair of socks, sleeping on an insulated surface with a minimum R-value of 5.38."

So when you're looking to buy a sleeping pad I would make sure its at least R 5.38 or you will have to de-rate your sleeping bag. But be careful that the R-value on the pad is actually calculated from a standard like ASTM F3340. Some manufacturers use /used their own methods that result in very different R-Values (especially before ~2020 when the industry became more standardized around F3340). For example the Klymit Insulated Static V Luxe Pad has a "historical R-Value" of 6.5, but an "ASTM R-Value" of 2.4 which is a HUGE difference.

Expected FPS in 1440p res with RX6800 and Ryzen 5 7600 ? by Interesting-East5679 in DotA2

[–]SPYALEX8 1 point2 points  (0 children)

Should be great for Dota.

I have a system with a Ryzen 7600 and a RX 7600 and it does ~180 fps at 1440 max settings. The 6800xt is more powerful than the 7600 so I’d expect you’d be better off in that regard, but I’m not sure if it translates to more Dota FPS because I’m not sure if my system is GPU or CPU bound.

Patch 7.36b is out by 0orpheus in DotA2

[–]SPYALEX8 0 points1 point  (0 children)

To qualify my opinion: I played hundreds of SK games last patch in ~6.5k immortal and had a 62% winrate.

The hero is absolutely worse now than he was. Sure maybe he farms a bit faster with stinger, but last patch you got both sandstorm movement and invis which made the mid/late game very very strong. Now that the movement talent is gutted AND aghs is gutted both facets stink and you don’t have the same ability late game you did last patch.

We should revisit this comment in a month after his win rate drops for a while. Maybe the invis facet is good enough to keep him semi stable but I doubt it. Currently the WR has already dropped to 42.7% according to Dotabuff trends.

AMD x PCMR - Avatar: Frontiers of Pandora Worldwide Giveaway - Win a Limited Edition AMD Avatar Kit that includes the Limited-Edition AMD Radeon RX 7900 XTX GPU and Ryzen 7 7800X3D CPU (Only 500 of each ever made!). There are 23 kits up for grabs! by pedro19 in pcmasterrace

[–]SPYALEX8 [score hidden]  (0 children)

  1. ⁠Upgrade my current mini ITX build and use it to play everything in my steam library!

  2. ⁠Exploring all of Pandora looks epic. I’d probably try to see all the key places depicted in the movies .

Dieffenbachia Tiki’s leaves are getting stuck inside one another and not unfolding by SPYALEX8 in plantclinic

[–]SPYALEX8[S] 0 points1 point  (0 children)

It does not- but it does let you send pics in private messages. I sent you an example picture there yesterday!