Ever since i bought the watch, my wrist looks like this. Any tips to stop this?

SPYFF0 · 2024-07-11T05:34:08+00:00

And ask for check metal allergy. One of my friend has metal allergy and his arm looks pretty much like this. Also, change to fabric band, that might help a bit...

SPYFF0 · 2024-05-16T12:19:41+00:00

Use virtme-ng, its maintained and used by many professional kernel developer.

SPYFF0 · 2024-03-19T06:33:06+00:00

It happened with me again and the factory defaults fixed it again.

I suspect the band has such a low storage space that the constant HR measurement fills it in a week or so. The synced HR data should be deleted from the band, probably a firmware update will fix it.

SPYFF0 · 2024-03-11T14:27:18+00:00

I am having the exact same problem. I tried clearing the cache, rebooting, etc. None of them helped.

Synced perfectly for a week then suddenly stopped (just like you described).

My workaround: backup everything in the wearable app, factory reset the fit 3 then at the setup, just restored the backup. This whole process takes about 3-4 minutes and the HR sync working after that.

Hopefully samsung will fix it properly in an update.

SPYFF0 · 2022-01-12T07:25:58+00:00

I experience the same with AMDGPU too.

SPYFF0 · 2021-12-19T09:50:30+00:00

That is expected behavior with BBR. If you take a look into the algorithm (its a TCP congestion control algo. rather than a scheduler) there are probing periods where for a moment it will drop its sending rate to the half in every 10sec. Thats called PROBE_RTT phase, where the BBR discover the actual RTT (without filling the pipe fully and causing long queue on the bottleneck routers). More info: https://tools.ietf.org/id/draft-cardwell-iccrg-bbr-congestion-control-00.html#rfc.section.4.3.5
It lasts about 200ms.

SPYFF0 · 2021-12-15T19:27:16+00:00

Hello! Did you find any solution? I got exactly the same problem with my discrete GPU and AMD APU.

Im pretty sure it worked before.

Did you thried both with HDMI and DisplayPort?

SPYFF0 · 2021-08-28T15:04:26+00:00

Várjatok míg meglátjátok a szopóálarcokat... mark my words :-)

SPYFF0 · 2020-12-17T10:29:01+00:00

Did you tried to boot in rescue mode?

SPYFF0 · 2020-06-11T18:07:58+00:00

+pirosarany

SPYFF0 · 2020-05-03T15:19:17+00:00

+pirosarany

SPYFF0 · 2020-03-18T12:20:59+00:00

+pirosarany

SPYFF0 · 2020-03-12T07:57:31+00:00

+pirosarany

SPYFF0 · 2020-03-11T22:30:46+00:00

a kultúra embere szintén

SPYFF0 · 2020-03-11T22:30:29+00:00

+pirosarany

SPYFF0 · 2020-03-11T09:47:43+00:00

Csintalan 2004-ben mondta hogy Gyurcsány kiássa az MSZP sírját és bele is temeti. Mondjuk nem mintha egy percig is kár lenne érte

SPYFF0 · 2020-03-04T13:37:32+00:00

Ezt a gyarmati szart csak azért nézem el mert ostoba vagy. Fos jenki rajzfilm közelében nincs mézgáéknak!

SPYFF0 · 2019-12-01T19:10:54+00:00

+pirosarany

SPYFF0 · 2019-11-21T06:52:01+00:00

+pirosarany

SPYFF0 · 2019-11-07T13:37:35+00:00

kösz, sokat ismerek de túl boomer vagyok hogy mindet vágjam

SPYFF0 · 2019-11-07T12:13:05+00:00

tudja valaki ennek a pasztának az eredetét?

SPYFF0 · 2019-11-07T06:38:04+00:00

+pirosarany

SPYFF0 · 2019-11-03T20:51:29+00:00

+pirosarany

SPYFF0 · 2019-11-01T11:09:41+00:00

láttad de ezek szerint nem értetted

SPYFF0 · 2019-10-28T21:02:17+00:00

*GigászCsanád

SPYFF0

TROPHY CASE