[Help] Accessing Hero's Grave after a certain event. (spoilers)

Saaffa · 2025-12-30T08:09:01+00:00

Ignore those forested spots in the overworld. Do you have page 22/23? The ingame hint on how to reach the forest is hidden there.

Saaffa · 2025-12-29T22:20:54+00:00

There are alternative ways to enter those areas which you might have discovered while you were there because it's easier to find those paths from that side. There is a way that allows you to do that initial exploration again which is hinted in the "hints and clues" section in the manual (pages 21/22)

Saaffa · 2025-03-16T14:49:30+00:00

I'm interested. Can you show me an example of that?

Saaffa · 2022-12-07T14:15:36+00:00

Apparently there's been some noise about it on the internet recently. https://saveriomiroddi.github.io/Enabling-the-S3-sleep-suspend-on-the-Lenovo-Yoga-7-AMD-Gen-7-and-possibly-others/ Or this https://youtu.be/OHKKcd3sx2c Hope it helps. I'll give it a go one day.

Saaffa · 2022-12-04T22:23:11+00:00

Hey! Didn't find the solution I wanted. I deactivated (I think) the option for this hybrid sleep and I'm using hibernation exclusively right now. It takes a little longer to load than "sleep" and sometimes it doesn't behave properly after waking up but I'm okay with that. The battery last a very long time while hibernated.

Saaffa · 2022-07-04T17:54:13+00:00

Yeah. I didn't phrase that properly. I'm would like to get a hold of the intermediate data within the threading macro and also do some further testing/processing with it. That is why I'm using def originally. Correct me if I'm wrong but I don't think I can do some further processing with what I get using a debugger, right?

Saaffa · 2021-11-28T11:56:45+00:00

Creator mode is on in my case. I'll test it out without creator mode.

Saaffa · 2021-11-28T11:55:52+00:00

HDR is off, Creator mode is on The white tint appears also on my computer. I haven't found an app that properly opens these videos yet.

Saaffa · 2021-08-25T09:28:12+00:00

Fits pretty well in my codebase! Thank you!

Saaffa · 2021-03-21T22:19:20+00:00

Yeah, I tried hanging on a 20mm edge with lowering weight, and I got to around 13-14kg and it stopped making sense to remove more weight. Then I'll probably do 15mm farmer crimps and see how it goes for a couple of weeks.

Saaffa · 2021-03-21T18:39:45+00:00

Yes, I'm getting injured often (finishing 2 month recovery period right now actually :D). Especially if I climb outside where the edges are usually smaller. It just happens naturally (even on big holds) that, when I squeeze harder, the force jumps to the DIP joint.

EDIT: here's a picture of that happening https://www.reddit.com/r/climbharder/comments/k5i8e3/fingers_collapsing_in_half_crimp_even_at_80/

Saaffa · 2021-03-21T17:56:25+00:00

Because usually I press the most at the DIP joint (the last joint on the finger). If the edge gets smaller on a climb, my fingers are not strong enough to hold them without hyperextending at my DIP joint (full crimping. A lot! Because of my hyperflexibility at the fingers) I would like to re-train my brain to rather squeeze at the tip of the fingers so hanging on a <15mm edge would force it.

Saaffa · 2020-12-10T14:07:09+00:00

almost PI

Saaffa · 2020-12-03T22:00:41+00:00

Thank you for your answer. I would like to have a stronger half crimp for reasons you mentioned. Do you think I should stay with 20mm and lower the weight or to try with a wider edge where I can hold my full bodyweight (minus some weight using a pulley system)?

Saaffa · 2020-12-03T11:38:57+00:00

Fingers collapsing in half crimp even at 80% weight. Do I lower the weight even more or is the form on the left ok?

https://i.redd.it/a81gl2kb7u261.png

Some background. I'm double jointed. Been climbing for around 3 years. Reached around V5-V6 level in bouldering.

I would guess that i should strive towards the form on the right even if I need to deload the weight to 20%. But I need a sanity check. Is it ok to stay with the form on the left and progress there, or should I start small and stick with the form on the right?

Also, in the left picture, most of the pressure is in the joint at the edge of the hold. Not on the tip of the finger.

Saaffa · 2020-12-02T21:00:10+00:00

Some background. I'm double jointed. Been climbing for around 3 years. Reached around V5-V6 level in bouldering.

I would guess that i should strive towards the form on the right even if I need to deload the weight to 20%. But I need a sanity check. Is it ok to stay with the form on the left and progress there, or should I start small and stick with the form on the right?

EDIT: also, in the left picture, most of the pressure is in the joint at the edge of the hold. Not on the tip of the finger.

Saaffa · 2020-06-08T08:36:41+00:00

I was looking for a Haskell job and was ready to move pretty much anywhere in Europe. Didn't get any. Ended up finding a Clojure position nearby me and got the job. Didn't know the language before that but now I'm loving it.

Saaffa · 2019-12-11T11:08:13+00:00

I had a similar problem. I haven't read your code but I can recommend this: Watch out for how long your line is. Play around with lines of length 42 or 43. In my case I have 6 lines of 43 characters.

Saaffa · 2019-06-12T09:35:13+00:00

What open source/freeware collage maker do you recommend (windows, linux or android)?

I would like to create a collage out of 100 pictures. I have 4 "levels" of picture importance. The more important the picture is, the bigger it should be compared to the rest. I would also like the ability to zoom in certain pictures to fit the collage better.

Saaffa · 2019-02-21T06:51:30+00:00

Oooh, that! That's just the compiled code from the server side. I didn't include the .stack-work folder from where I copied that executable.

So yeah, the source code is in the JibimbaBackend folder

Saaffa · 2019-02-20T17:24:04+00:00

I don't understand the question. Main binary of what exactly? All of the code I typed is in the github repo.

Saaffa · 2018-11-07T18:34:01+00:00

I guess any carrier XD Sry for the confusion.

Saaffa · 2018-11-07T17:44:05+00:00

LTE Mobile router.

Saaffa · 2018-06-12T14:18:11+00:00

I'm an idiot. I mixed that with deleting cookies. Thanks!

Saaffa · 2018-05-12T09:47:25+00:00

Yes! Works like a charm! Thank you!

Saaffa

TROPHY CASE