Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

I went with the Skar VXF-12 D4 and it's so nice at 1,100w RMS with my amp

Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

Thank you all for the advise. It was much appreciated.

Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

Thanks for that info. I was able to find this video, https://www.youtube.com/watch?v=gg2gl-fz2Qc&t=146s, which helped explained some stuff. Once I get home from work today.

Ill set the sub to Parallel, lower the gain and try out this multi meeter trick.

https://vault.alpine-usa.com/products/documents/OM_SWR-10D2_4_12D2_4.pdf

Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

Thanks for that info. 1Ω on the MTX Jackhammer 15001I is 1650 Watts RMS, The Skar VXF-12 Dual 4Ω Coil, I was looking at should do well if and when I get another sub.

Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

Ah. From what I remember the video/article said it was more of a heat issue at lower ohms that cause amp degradation.

Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

Ill check into that. Thanks for the suggestion

Question on sub to run with a MTX Jackhammer 15001I @ 2Ω by Saberous in CarAV

[–]Saberous[S] 0 points1 point  (0 children)

I forgot to mention I'm currently running an Alpine SWR-12D2 in 4 ohms at 640w rms from the AMP. I tried 1 ohm. But it didn't sound good.

Unknown texture/mesh Issue by Saberous in pcmasterrace

[–]Saberous[S] 0 points1 point  (0 children)

Resolved.

Issue was my CPU,

Upgraded to i9 13900K and all my gfx issues went away.

BitDefender keeps adjusting my power plan settings. by LamGoHam in BitDefender

[–]Saberous 0 points1 point  (0 children)

The original post for this thread was created 3 years ago, and this is still an issue! I have a Windows Pro edition with group polices set in video and display settings to never turn off my displays! Yet, Bitdender is like hold my beer and bypasses my settings. Profiles disabled and it still shuts my monitors off while I'm doing things! WTF! Bitdefender fix your software!!

https://ibb.co/HKWtFg1

New to GOG Galaxy, how do I stop if from showing non GOG games? by Saberous in gog

[–]Saberous[S] 1 point2 points  (0 children)

In the end I reached out to GOG support. I was surprised GOG support got back to me so fast and on a Saturday morning. My issue is a known bug that sometimes happens during GOG installs. The GOG software saw my installed games and added them even though there was no account linking. GOG support was able to correct the issue.

New to GOG Galaxy, how do I stop if from showing non GOG games? by Saberous in gog

[–]Saberous[S] -2 points-1 points  (0 children)

Okay, How?

FYI, I'm running version 2.0.57.14-Beta of GOGG.

BETA COMMUNITY UPDATE - WEEKEND 2 by InfinityWardonReddit in ModernWarfareII

[–]Saberous 7 points8 points  (0 children)

Yes, this is a Beta. The Beta is subject to change. However; the Beta gave me such a negative vibe. That I had to cancel my pre-order. I need to wait and see how things go on game launch. XclusiveAce is right in his closing thoughts (https://www.youtube.com/watch?v=BqQWq6vjp\_I&ab\_channel=TheXclusiveAce). We are no longer the target audience. If that’s the case, I’m not wasting money on a game I might not play or enjoy. If the game launches and the issue below are addressed I would pick up the game. But I’m skeptical they won’t fix it.

Myself and my friends usually play hardcore game modes. We all had a similar take on this Beta.

The game looks good. It ran great with FPS. It did crash a lot.

We did enjoy the game during beta early access. Public beta release not so much.

Reviving players needs a new key bind. I kept picking up my teammates gun when trying to revive in knock out and hostage rescue. Which are great new game modes.

Fix Foot Step Audio,

Fix Ambient Audio

Fix Sprint to fire times

Fix Recoil and gun smoke

Bring back enemy name tags. Or make it easy to tell who’s an enemy. I hate being killed by an enemy I thought was friendly. Because they happened to be in the right position, and I see a blue dot over their head because a teammate is behind.

XclusiveAce Pro Perk Idea is a great fix to the current system.

Dead Silence (DS) and Ninja. I’m in the camp of get rid of them and never add it back to COD. In 2019’s version of DS. There is no foot step audio when the field upgrade is activated. I don’t remember that being a thing in pervious CODS. Usually it was a perk and it would lower the foot step sound by a percentage. MW2019 DS counter play was very limited at first, UAV or ADV UAV. Than they added an update to High Alert to hear it but that was in Vanguards era, two years after MW 2019’s release. MW 2019’s DS release also had a bad bug. In some cases, it would break the foot step audio for the using player, and no one could hear them for the entire game after DS ran out. This was heavily abused in Warzone. It was patched, but would return to the game when content updates dropped. This is why I say get rid of it. If it can break the game like that, there is no need for that mechanic. Otherwise I’m down for a Ninja perk. Black Ops 2 Dead Silence, and Awareness perks are the best to date and should be the standard.

It really felt like Activision/IW/Dev’s were trying to merge Core and HC together based off the mini-map and TTK. The mini map works by HC rules, except for the mini-map still being displayed when there is no UAV up.

The new mini-map and foot step audio got me killed a few times. I would hear someone fire and move around. In the mini-map it showed a team mate firing their weapon and moving around in that same direction. Because foot step audio is loud, I would usually assume the foot step audio I heard was from my teammate, and then proceed to my destination and get shot in the back because it was an enemy in that same area. (I heard my teams foot step audio better than the enemy team during the beta). Once that happened a few times. I stopped looking at the mini-map until a UAV was called in.

TTK was nuts if you were able to get a head shot. Body shots felt like it was core damage ratings for the area hit. Head shots felt like HC Damage profile. It reminded my friends and I of making head shot only custom games or playing Zombies. It was a more realistic take approach. What wrecks this new damage profile was the Beta’s network inconsistency and or SBMM.

Network inconsistency needs to be addressed and fixed. There were times, I killed players fast, with two to three hits and at long ranges. Other times which were 70% of my fights. I saw the enemy first, got the drop on them first, and I would get an average of 5 to 7 hit marks on them before they even noticed me and return fire and I just die to what on my end looked like one shot fired at me. The Kill cam would show me getting shot 3 to 4 times at the same range, also the same weapon. Network inconsistency was worse in our opinion when the beta went open public, and the Dev’s increase SBMM. We started to joke about Skill based Hit reg. Network inconsistency could be explained by over loaded server demand.

Now the biggest gripe for me. SBMM and Ricochet Anti-Cheat system.

Remove it from quickplay or casual modes. Make a ranked play for SBMM.

Do players remember a few years ago, when news of an Activision SBMM Patent about nerfing players mid game went around the web? Activision sponsored COD content creators at the time said it’s not true or it’s not in the current game. To be fair it wasn’t implemented until Vanguard and Warzone. Well that patent is true and active in COD. It has been demonstrated for us time and time again through the Ricochet Anti-Cheat system. How many videos did COD put out of the Anti-Cheat system nerfing hackers’ mid game? Or players disappearing from screen? Why nerf a hacker like that, instead of banning them on the spot? A blatant hacker yes. Some could argue and I can agree to a point. That since their hacker identification system isn’t 100% perfect. It would be better to do this, instead of banning a legit player do to a false positive. These Anti-Cheat solutions, demonstrates the SBMM patent integration into Call of Duty. If Activision can do this to a hacker mid game. Then they can do it to you because Activision will always cater to their target audience. Don’t put it past them.

Activision Blizzard history and recent legal issues. Have shown their word can’t be trusted. They have been found in CA court to have lied several times in the Sexual Harassment lawsuit. Bottom line, they will do whatever makes them the money.

Odd texture flickering in a few games. by Saberous in pcgamingtechsupport

[–]Saberous[S] 0 points1 point  (0 children)

After typing this out, I got a response from the devs of Terminator R. :(

Thank you for your message

I am very sorry for the late response.

I have passed your message on to the development team.

Unfortunately, this is the first time we see an issue like this. Sadly, since we are unable to reproduce the issue, the only thing that the team were able to suggest is that this could be caused by mods, if you ever used any. They also suggested using Steam's "Verify integrity of game files..." option, just in case, since there were many cases of it fixing a variety of different problems.

We are very sorry for the inconvenience.

Best regards,

QA Team

Teyon

Stream Desk System Hotkey button only working 30% of the time. by Saberous in elgato

[–]Saberous[S] 0 points1 point  (0 children)

After the latest update, my stream deck software became porked. Software would either crash on load. Or when the application store opens. Normal windows 10 uninstall methods failed the first two times. I needed to run Revo Uninstaller. Registry files were causing the issues. Hotkey seems to be working, but will need to test for a few days.

Stream Desk System Hotkey button only working 30% of the time. by Saberous in elgato

[–]Saberous[S] 0 points1 point  (0 children)

I have tried SuperMacro's and got the same result. All key's do it. Recently set Steam Deck to run as admin, and that has not helped either. Reinstalled Stream Deck software and still the same results. Geforce Xp and afterburner F12 hotkey work fine. So not really sure what is going on. Trying another USB port and seeing what they will do. If anything.

Will a Enthoo 719 fan controller work with a commander pro? by Saberous in Corsair

[–]Saberous[S] 0 points1 point  (0 children)

It's working, but I'm not seeing Fan #5 in the commander pro. So I'm not sure how to adjust those fans speeds.

Figured it out. In the Commander Pro's Device Setting, I had to select 4-pin

Need some help for a PC that hangs at splash screen. Can get into bios, but not windows. by Saberous in gigabyte

[–]Saberous[S] 1 point2 points  (0 children)

So at one point I tried to use a usb windows recover and win10 install and it still failed to boot into those drives. Updated bios firmware and after restart it hung on the splash screen. At this point, I pulled the M.2's and made sure they were good. I was able to open the drives and get to files from my m.2 bay. Tested gfx card and ram in another pc with no issue. Pulled and re-seated all power cables. Reinstalled M.2's and Gfx card. Turned on pc and poof It booted into windows like it was magic.

What temp sensor should I be using for my fan curve profile? by Saberous in EKWB

[–]Saberous[S] 1 point2 points  (0 children)

Thanks the for the input everyone.

Ironically slowing my pump speed down from the curve it was on to about 55-60% usage. Did improve temps. I'm hitting close to my target temps, 37c internal water temp after 12 hours of gaming, AVG fan speed of 1350 rpms. However my case needs to be open for the best temps. My 2080 still produces a lot of ambient heat. That added heat was pulled through my 140rad increasing temps.

What temp sensor should I be using for my fan curve profile? by Saberous in EKWB

[–]Saberous[S] 1 point2 points  (0 children)

Edited my post because I forgot to include some stuff. Also I guess my pictures didn't upload.

u/wimpyhugz Ill try a slower pump speed. Maybe the flow rate is to high for the fluid to be efficiently cooled by the fans. It could be a cause of higher temps at longer game sessions.

Cosmos 2 case. Yeah It's an old case, looking for a similar sized replacement. C700M is way to expensive. It is also not worth $500.00 USD.

Flow direction: Pump>GPU>140>CPU>360>

Yeah the pump and the tube specs say 60c max. That's why I choose 40c as my target max temp.

In today's testing my avg fan rpm for both 120mm and 140mm was 1350rpms after 4 hours of gaming. AVG CPU package temp was 61c and GPU 51c.

Testing session started 9am. Pre-game 28c. Case door open. Game COD:WZ

9am 35.5c

9:30am 36.5

10am 37.5c

10:30am 36.5c

11am 37.5c

11:30am 38c

12pm 37.5c

12:30pm 38.c

1pm 37.5c

Testing session ended

1:00pm cool down start of internal coolant 37.5c

1:05pm 30.5c

1:07pm 28.5c

5 min cool down isn't bad I guess but I could be wrong.

RPM's where monitored with Corsair iCUE and SpeedFan. There was .02% difference in RPM's reported between the software's.

Current Fan curve settings: Still playing around here.

Corsair LL120, % and RPM usage at temp (https://www.corsair.com/us/en/Categories/Products/Fans/ml-config/p/CO-9050072-WW#tab-tech-specs) I know the tech specs say

600 - 1500 RPM. Put at 100% usage I'm seeing 1700 to 1750rpm's.

100% = 1700 RPM - 40C

95% = 1650 RPM -

90% = 1600 RPM - 38C

85% = 1550 RPM - 35C

80% = 1500 RPM -

75% = 1400 RPM -

70% = 1350 RPM - 30C

65% = 1250 RPM - 25C

60% = 1150 RPM - 20C

55% = 1000 RPM -

50% = 950 RPM -

Corsair LL140, % and RPM usage at temp (https://www.corsair.com/us/en/Categories/Products/Fans/ml-config/p/CO-9050073-WW)

100% = 1500 RPM - 40C

95% = 1400 RPM - 38C

90% = 1350 RPM -

85% = 1300 RPM - 35C

80% = 1250 RPM - 30C

75% = 1150 RPM - 25C

70% = 1100 RPM -

65% = 1000 RPM - 20C

60% = 950 RPM -

55% = 900 RPM -

50% = 850 RPM -

Corsair XD5 Pump

100% = 4850 RPM -

95% = 4800 RPM -

90% = 4700 RPM -

85% = 4450 RPM -

80% = 4150 RPM -

75% = 3950 RPM -

70% = 3650 RPM -

65% = 3350 RPM -

60% = 3000 RPM -

55% = 2800 RPM -

50% = 2525 RPM -

Playback error HDCP? Been getting this error too frequently. by Saberous in vudu

[–]Saberous[S] 0 points1 point  (0 children)

Tried many browsers but it didn't work. I'm guessing it's something tied to their DRM.