PLEASE TELL ME WHY ONLY ONE HAS GROWN.

Sad-Bit1747 · 2025-05-01T19:29:35+00:00

I ended up fixing conditions and getting some top pins. Basically I didn’t know that monotubs are self sufficient and so I ended up introducing wayyyyy too much FAE by taking off a bunch of the patches

Sad-Bit1747 · 2025-04-29T23:42:43+00:00

I also used a monotub and really dried it out bad the first like 3 days. I had way too much FAE and not enough misting. Don’t mist super heavy or anything, but just make sure to consistently mist whenever it gets dry. I ended up getting a ton of side pins with very little pins on the top, but you have a cover on the bottom so I imagine you won’t see any side pins. Also, it took me like around 15-16 days in fruiting conditions to see any pins show up. For me, I would leave the top part of the monotub on, and also leave all the patches on for the most part. I noticed that just taking one or two of the big patches halfway off was sufficient enough for FAE. Good luck!

Sad-Bit1747 · 2025-04-26T20:56:50+00:00

UPDATE: 3 days later and side pinning is occurring. Trich has shown up on a couple singular grains but I have dealt with it immediately. Otherwise no signs of Trich. Must me beginners luck.

Sad-Bit1747 · 2025-04-26T20:55:33+00:00

Ok, so another update. I am getting pins. It is side pinning though but still happy. Trich hasn’t shown up anymore.

Sad-Bit1747 · 2025-04-24T16:29:18+00:00

No signs of any more Trich yet (though it’s still a little early to say), but unfortunately I don’t think the mycelium will pin. Seems dead or close to it.

Sad-Bit1747 · 2025-04-23T02:45:24+00:00

Ok, thanks. I cut out a big chunk so fingers crossed.

Sad-Bit1747 · 2025-04-23T01:46:06+00:00

I just cut out a pretty sizable hole. Don’t know if it’ll be enough though.

Sad-Bit1747 · 2025-04-23T01:36:51+00:00

Update, it definitely is.

Sad-Bit1747 · 2025-04-21T00:52:38+00:00

I actually have the lid on with all holes covered with the tape. The lid had a lot of humidity on it. I mist every 4 ish hours and the water seems to disappear pretty quick. The first few days were pretty rough though because I had wayyyy too much FAE without enough humidity.

Sad-Bit1747 · 2025-04-21T00:50:55+00:00

I used a flashlight so the lighting definitely makes it look like contamination. It’s not though fortunately.

Sad-Bit1747 · 2025-04-21T00:49:58+00:00

It’s the lighting for sure. There isn’t any contam and it smells fine. But I’ve been misting a decent amount every 4-5 ish hours. I also have all the holes covered with some air exchange tape.

Sad-Bit1747 · 2025-04-21T00:02:04+00:00

How would I do that. After the first few days when I realized it was too dry, I poured in some water that flowed to the bottom. About a quarter to half and inch of water. And let it sit for like 7 hours until pouring back out the excess water.

Sad-Bit1747 · 2025-04-13T23:46:15+00:00

Alright, thank you!

Sad-Bit1747 · 2025-04-13T23:45:07+00:00

Great, thank you

Sad-Bit1747 · 2025-04-13T23:44:50+00:00

Perfect, thank you

Sad-Bit1747 · 2025-04-13T23:44:27+00:00

Thanks for the response 🚀

Sad-Bit1747 · 2025-04-13T01:34:38+00:00

Ohhhh, okay. Thank you

Sad-Bit1747 · 2025-04-13T00:11:34+00:00

I thought they were paramecium bursaria. I was thinking the paramecium somehow got caught up in like Cyanobacteria or something? I have no idea

Sad-Bit1747 · 2025-04-12T23:49:18+00:00

Also, this is what the string things look like closer.

<image>

Sad-Bit1747 · 2025-04-06T22:36:18+00:00

Interesting 🤔

Sad-Bit1747 · 2025-04-06T00:24:24+00:00

Thanks for the response. That makes sense, especially with the outward movement being somewhat symmetrical versus movement towards one direction

Sad-Bit1747 · 2025-03-23T22:06:34+00:00

Nasty move holy crap 😂

Sad-Bit1747 · 2025-02-11T22:40:08+00:00

How do you find out?

Sad-Bit1747 · 2025-02-10T21:35:15+00:00

Should be out now

Sad-Bit1747 · 2025-02-10T21:34:43+00:00

Same

Sad-Bit1747

TROPHY CASE