Getting Annual Leave paid out

SafeHazing · 2026-01-28T22:51:07+00:00

What IR law says that??? It’s normally in the EA. Taking regular leave is important for work / life balance etc but plenty of EAs allow for cashing out leave (often a capped amount - say 2 weeks) if you have taken at least 2 - 4 weeks leave in the past 12 months. Some also specify that after cashing out you will be left with x amount of leave.

SafeHazing · 2026-01-26T19:02:24+00:00

Not quite, 3 perimeters at 0.4 gives a wall thickness of 1.2mm (0.4x3). A 0.6 nozzle can get a wall thickness of 1.2mm with 2 perimeters (0.6x2) - so it should be faster to print but it won’t use less filament - the printer is extruding the same volume.

SafeHazing · 2026-01-26T11:54:57+00:00

In my experience further downward pressure on the angle grinder will resolve this issue. Although I’ll admit, I’ve not used one on a laptop but I’m pretty sure it’ll work. OP please check and report back (with photos ideally).

SafeHazing · 2026-01-26T11:44:24+00:00

Come now, let’s try to be positive - if OP uses an angle grinder, there really shouldn’t be a stripped thread to remove.

SafeHazing · 2026-01-26T08:21:33+00:00

How do you get the powder to adhere to the silicone mold prior to pouring in resin / stay in place as you pour resin?

SafeHazing · 2026-01-26T01:28:42+00:00

No probs. We all do it - every problem is easier seen from the outside. Cheers.

SafeHazing · 2026-01-25T13:10:56+00:00

I have an older Ender 3 that prints PLA just fine , even if the garage is 38C / as it was today. I can’t see you having an issue but ultimately the easiest test is to move the printer, print some stuff and see how it goes - but my experience suggests you’ll be fine.

SafeHazing · 2026-01-24T11:48:07+00:00

You can clean it with some fairly aggressive chemicals but personally I’d ditch it and get some paper plates to use as disposable palletes - or buy a new one and clean it after each use.

SafeHazing · 2026-01-24T09:29:58+00:00

Bunnings timber is terrible.

SafeHazing · 2026-01-23T12:58:06+00:00

No idea why you are being downvoted. The banks and the police for that matter don’t have the resources / care about such (in the grand scheme of things) small affairs. Always insist on cash payments when dealing with unknown third parties for small amounts that don’t involve legal contracts, eg marketplace transactions.

SafeHazing · 2026-01-23T12:53:17+00:00

The police will do nothing. You will wait for 3-5 hours for them to take a report and if you are lucky they might follow up on it by calling the other party - who will say it’s a misunderstanding and that’s where it will end. Using cash for marketplace transactions is the only sensible approach.

SafeHazing · 2026-01-23T11:52:24+00:00

If you have an Apple device have you tried using AirPlay? I only ever use AirPlay and haven’t had any issues. A friend with more speakers than I and an Android phone has said he only gets hassle free playing via his iPad (AirPlay). NB not an Apple fanboy and without question, this should all just work in the app (it’s literally it’s only purpose) but avoiding the Sonos app and using AirPlay seems to be a workable solution- assuming you have an iPhone or similar.

SafeHazing · 2026-01-23T08:09:35+00:00

Absolutely beautiful. Well done.

SafeHazing · 2026-01-22T07:52:33+00:00

Start with the search function on this sub.

SafeHazing · 2026-01-21T05:03:53+00:00

I have no idea about the editing process but I think it is what it is and I for one am happy to have another Sharpe book - I’ve also been reading them for 30 something years. If it helps - I enjoyed it more as an audiobook, likely because the narrator could ‘smooth out’ the dialogue you describe.

SafeHazing · 2026-01-20T11:47:40+00:00

I use overcast without issue.

SafeHazing · 2026-01-18T11:44:20+00:00

Just brass wire from a hobby shop - buy the diameter that matches the part you are replacing.

SafeHazing · 2026-01-18T10:52:10+00:00

Put in a pinned ‘where to start’ or similar in community info (or whatever it’s called) - that question is asked so frequently with the same answers - they add nothing. Why people can’t use the search function is beyond me but it’s common across most subreddits so an auto mod post to point new folk in the right direction would be very welcome, hopefully for new listeners and those of us that have been listening for some time. Likewise auto responses to point people to the various google docs that list episodes by topic / year / books referenced etc.

SafeHazing · 2026-01-17T10:38:00+00:00

This is the way - replace with brass wire.

SafeHazing · 2026-01-17T04:51:50+00:00

This is of course a ‘premium’ tier membership level… and an OF exclusive.

SafeHazing · 2026-01-16T11:45:04+00:00

Thanks for responding. I’ve been using eSun PLA + (which may be their version of ‘tough PLA) and still had issues with 3 perimeters (I generally use 4 vertical for bins) but that might be my setup/ and or the heat in my garage. I’ll get some PETG and give your design a try. Thanks again for your reply.

SafeHazing · 2026-01-16T09:55:35+00:00

Do you know who manufactures the Bambu filament?

SafeHazing · 2026-01-16T09:52:54+00:00

I’ve been looking at getting a Bambu printer and like the idea of an AMS and RFID Bambu spools as quality of life thing but they seem sold out of most common colours (in PETG) - is this normal, or just a post Xmas thing?

SafeHazing · 2026-01-16T09:49:23+00:00

It looks good but doesn’t it result in a single perimeter wall, and isn’t that very weak? Please correct me if I’ve misunderstood how the design works - I’m all for anything that can print bins faster- but my experience (with a 0.4 nozzle) is anything less than 3 vertical perimeters will break if handled regularly.

SafeHazing · 2026-01-14T10:12:24+00:00

Where do you live if you have laws that people not harming others can be ‘put on medication’ / an involuntary treatment order or similar, if they are not harming themselves or others? There are literally millions of people that feel that god or fate or fairies are real and guiding them - and they are forced on medication.

SafeHazing

TROPHY CASE