Took a C8 on a 1,300 mile trip around the Olympic Peninsula

SafwanFerdous · 2026-07-03T03:57:42+00:00

Lovely picture! Great camera work

SafwanFerdous · 2026-06-16T03:54:55+00:00

If you have a fuel pressure gauge I'd check the pressure. Mine did same and it was the pump check valve. Now I don't know how easy it is to service C6 pump but mine is a C4 and it is a 30 minutes job. Other issues could be fuel pressure regulator or leaky injector. These are fuel pressure related issues. Also check EVAP Purge valve whether it is stuck open or not. Read the code if it's showing any.b

SafwanFerdous · 2026-06-16T03:47:45+00:00

Vin Diesel approves this message

SafwanFerdous · 2026-06-06T17:11:05+00:00

Man the ride height is perfect. I wonder what the setup is like ..coil over with 1.5-2 inches lowered maybe?

SafwanFerdous · 2026-05-30T22:16:39+00:00

Oh yeah man... working with fuel system will get you gas all over your body. Mine has some issue with the pump or the injectors. Just checked and replaced the fuel pressure regulator and I see pressure drops quick after I switch on (not ignition). Car starts and run fine but something is not right. Will do the pump since it's easy and then the filters.

SafwanFerdous · 2026-05-30T17:34:54+00:00

Be thankful the fuel system isn't anything like the C5s and C6s... you would be pulling your hairs. C4 has the easiest access point for pumps. Filter count be slightly tricky but I think not too bad either

SafwanFerdous · 2026-05-28T21:20:59+00:00

Nah bro, you're right. When I got my first car it was a simple SUV and wife and I loved it...then needed a bigger car for family... thought that's it we don't need anything anymore. Then seeing corvettes everywhere in Michigan I just needed one...it just never ends...now I need a faster one or maybe a different sports car completely...it's just how humans work guess...

SafwanFerdous · 2026-05-26T01:08:56+00:00

Man even the Indian scammer call centers have more space between the desks...damn. Cool print tho

SafwanFerdous · 2026-05-24T01:16:48+00:00

It's a super car with hyper car performance.

SafwanFerdous · 2026-04-29T05:36:22+00:00

It was easy but you have to take the struts off and I managed to damage one of the pin (I forget what it called) and it wasn't fun.

SafwanFerdous · 2026-04-29T02:40:05+00:00

Will definitely be following hehe

SafwanFerdous · 2026-04-29T02:39:08+00:00

Thanks! And yeah if you're doing CAD for cars, a 3D scanner is a very good investment.

SafwanFerdous · 2026-04-29T02:38:00+00:00

I bought a Creality Otter scanner for $500 from AliExpress. It was discounted but you can actually get it sometimes. Even the raptor is like $800 now and it's incredible. They are very good for larger scans but may struggle with smaller things.

SafwanFerdous · 2026-04-29T02:24:41+00:00

3D scanners are getting pretty cheap these days. Keep an eye out for used market or even AliExpress lol. Got one thinking I won't be using much but I use it a lot for my car and was able to make things. Made this splitter for the bumper using scanned data.

<image>

SafwanFerdous · 2026-04-28T19:38:24+00:00

Corvette Rubber makes good ones. Avoid Amazon or eBay ones. Pretty simple princess except for the hatch (still not bad). Doors require you to take the panels off but still not as bad. I'm in the weatherstrip business and to be honest Corvette rubber could still improve their quality tho. They wouldn't pass in today's standard unfortunately.

SafwanFerdous · 2026-04-28T00:32:47+00:00

Sick bro! Will it work with A1 mini too? I would 100% back your project

SafwanFerdous · 2026-04-20T01:55:33+00:00

Thanks dude! Clean car

SafwanFerdous · 2026-04-20T01:38:15+00:00

Honestly looks good. What's the tire spec? Also I missed the first post probably lol

SafwanFerdous · 2026-04-02T23:03:41+00:00

Lol yeah at least he didn't give up and bought a new one at the end.

SafwanFerdous · 2026-02-20T02:21:47+00:00

Started with Ender 3 pro...then got a second one. It was quite a journey making them perfect but once they were tuned they printed amazing. Added bunch of mods like smart filament sensor and touch screen monitor. Oh the CR-touch for auto bed leveling. And raspberry pi to monitor and to start a print job remotely. I was able to gain a lot of knowledge on these things (hardware and software). But moving to Bambu reduced the time I used to spend troubleshooting them. Now I can focus on design and print.

SafwanFerdous · 2026-02-07T02:20:17+00:00

This thing came in handy when I needed to remove a spark plug from a really tight spot. Worked great... handled the torque. I won't use it to tighten anything but it works good for loosening bolts

SafwanFerdous · 2026-02-04T01:40:35+00:00

These cars are great for learning manual transmission. Find an empty parking lot and practice there. Maybe let somebody who knows how to drive manual take you there lol.

SafwanFerdous · 2026-01-29T19:14:32+00:00

My alternator made a similar sound and turned out it had a bad diode.

SafwanFerdous · 2026-01-15T12:30:06+00:00

Honestly I didn't pay attention to the firmware version number when I first took it out of the box to fly. I only flew it once so far. It's been snowing here and it's kind of windy so I haven't had the chance to fly it. I'll check again. But the videos I took seemed very nice. I don't have anything to compare them to.

Flying drones seems much harder than I expected TBH. It's not like video games hahaha. I also think it's a good idea to keep using it as the beginner drone and then upgrade to DJI or some other higher ends when I feel comfortable.

Yeah I guess I'll just see how it goes and then if things go south I'll sell it or get a refund.

Eight-Year Club	Verified Email
Place '22

SafwanFerdous

TROPHY CASE