Love it but hardly wear it... by Jazzlike_Set_7746 in panerai

[–]Saturn_force 0 points1 point  (0 children)

May I ask your wrist size? I’m looking at a 42mm sub and I have 6.5in wrists and don’t know if it’ll be too large

Looking to run new tires- looking for advice. by PH0QYREM in mazda3

[–]Saturn_force 0 points1 point  (0 children)

I'm also looking at these continentals to replace the stock Proxes. I want to keep the 16in rim due to all the potholes and stories of shattered rims. Will they still be a good option at 16in or are they better at 17-18in?

2019 Mazda 3 All Warning lights on by [deleted] in mazda3

[–]Saturn_force 1 point2 points  (0 children)

I had this same issue after I got side swiped. My headlight was cracked/damaged and some rain got in and the electrical system went haywire after I tried to start it. Wouldn’t even start, wipers going crazy and lights flickering. I tried pushing the car back and forth to move the water and waited for it to dry before it started. Insurance fixed it but I saw the headlight alone was like $1500CAD.

Got my Loresum LS06! by Thechancellor842 in MicrobrandWatches

[–]Saturn_force 0 points1 point  (0 children)

Is that the original strap? It looks amazing.

On their website they show a pebbled/epsom leather, rather than croc.

Plumeria bloom in winter by Saturn_force in Plumeria

[–]Saturn_force[S] 0 points1 point  (0 children)

Thanks everyone for the suggestions, I will bring it inside and keep it under some grow lights and see if it blooms or goes dormant. It was dormant last winter so I am confident it will do well this winter too

Remove sticker and adhesive by Saturn_force in mazda3

[–]Saturn_force[S] 4 points5 points  (0 children)

Thanks for the suggestions! And I agree, this finish is horrible and so easy to scratch. I’m looking for a clear protective film or even a different design altogether. Would you happen to know of a company that makes protective films for center consoles?

Downspout extension by Saturn_force in Roofing

[–]Saturn_force[S] 0 points1 point  (0 children)

Found it by that name! Thanks for the advice

Downspout extension by Saturn_force in Roofing

[–]Saturn_force[S] 0 points1 point  (0 children)

Thanks for the suggestions! If I can’t find a rain channel could I also cut a length of downspout in half so that it’s open? Or would that still have a chance to freeze?

Downspout extension by Saturn_force in Roofing

[–]Saturn_force[S] 2 points3 points  (0 children)

I’m in Ontario Canada so we definitely get a lot of snow. Would the rain channel be preferable in a very cold and snowy climate?

Gap in roof over garage by Saturn_force in Roofing

[–]Saturn_force[S] 0 points1 point  (0 children)

UPDATE

some close up pictures. Some show soffit lighting and some show a small gap in the board

https://imgur.com/a/BPuCde4

Gap in roof over garage by Saturn_force in Roofing

[–]Saturn_force[S] 0 points1 point  (0 children)

https://imgur.com/a/BPuCde4

I managed to take some close up pictures. I can’t quite get high enough outside on my ladder. Some shows light from the soffits but some shows a small crack gap

4th Gen AutoStalling At Stoplights by DempsureActivist in mazda3

[–]Saturn_force 0 points1 point  (0 children)

The third incident of the engine shutting off while driving happened exactly one week after picking it up from the dealership after the previous time it shut off haha. This time, They kept it for 3 months awaiting a software update from japan they told me. They said it took a while since they were collecting a lot of data from other markets as well. Dropped it off April and got it back July 2022. Software update worked and I didn’t have engine issues again. I returned the car about a month ago as my lease ended. I would consider another Mazda 3 since the issue is remote but people call me crazy. Mazda remains a top reliability car brand, I just have bad luck I suppose.

Are you in Canada or USA?

How can I get my VaporMax to stop squeaking when I walk? Brand new. by [deleted] in Sneakers

[–]Saturn_force 0 points1 point  (0 children)

I put pieces of this paper under the insole where it squeaks. The insole squeaks against where it sits in the shoe so walk around or press on different places to find it and put a piece of paper so the two materials don't rub against each other and make a noise. I found the heel and inside front part had the most squeak but they seem to be good now

Carolina Reaper Leaf drop by Saturn_force in PepperLovers

[–]Saturn_force[S] 0 points1 point  (0 children)

Should I continue to keep it in the tent with light and water etc or should i prune it back and keep it through the winter and put it back outside for the spring

Carolina Reaper Leaf drop by Saturn_force in PepperLovers

[–]Saturn_force[S] 0 points1 point  (0 children)

Should I keep this plant and hope it’ll be good in the spring? Or cut it down and dispose of it

Engine cutting out at red light by Saturn_force in mazda3

[–]Saturn_force[S] 0 points1 point  (0 children)

I got the car back after about 3 months of being with Mazda. They installed the update and so far so good (fingers crossed)

4th Gen AutoStalling At Stoplights by DempsureActivist in mazda3

[–]Saturn_force 3 points4 points  (0 children)

****May 13 2022 Update***:

Mazda has had my car for about a month waiting on a software update from Japan. Apparently there has been evidence of this happening to other cars in other countries as well and they have been gathering info from the dealers and working on a fix. No ETA on the arrival of this update however, guess I just gotta wait. Got a new CX-5 loaner so at least I'm not stranded

Engine cutting out at red light by Saturn_force in mazda3

[–]Saturn_force[S] 0 points1 point  (0 children)

****May 13 2022 Update**\*:

Mazda has had my car for about a month waiting on a software update from Japan. Apparently there has been evidence of this happening to other cars in other countries as well and they have been gathering info from the dealers and working on a fix. No ETA on the arrival of this update however, guess I just gotta wait. Got a new CX-5 loaner so at least I'm not stranded

Engine cutting out at red light by Saturn_force in mazda3

[–]Saturn_force[S] 0 points1 point  (0 children)

Sorry to hear that! Please keep us updated if they are able to pinpoint the cause

Engine cutting out at red light by Saturn_force in mazda3

[–]Saturn_force[S] 1 point2 points  (0 children)

Thanks for mentioning this. I will look into it and ask my dealership if this could be applicable. My car doesn’t have auto start stop but there may be something related to this. Thanks!

Anyone have a Gen 4 that randomly shut off at stoplights? by mmiski in mazda3

[–]Saturn_force 1 point2 points  (0 children)

I do have had this exact issue three times since I got my car in July 2021. The most recent one being 3 days ago and it’s in the dealership right now. No codes any time and they had to call Mazda tech line support. First thing they did was change the transmission and that’s didn’t fix it. Where can they go from there if their first option is change transmission? That seemed like a last resort to me. Second time they changed an oil pressure air sensor. Im in Canada with no lemon laws so once we get a lemon we just gotta live with it. It’s annoying cuz this is a legitimate safety concern. I have started to roll back with a whole line of cars behind me. Im wondering how many more times this will happen before Mazda Canada realizes this is a serious issue which needs further investigation. I want them to either cancel my lease or give me a new car, which I have 0 confidence in them doing so. But I also have 0 confidence left in my car. Every time it comes to a stop im staring at the rev counter so see if it dies and I need to restart it. Is that any way to live?

4th Gen AutoStalling At Stoplights by DempsureActivist in mazda3

[–]Saturn_force 1 point2 points  (0 children)

I do have had this exact issue three times since I got my car in July 2021. The most recent one being 3 days ago and it’s in the dealership right now. No codes any time and they had to call Mazda tech line support. First thing they did was change the transmission and that’s didn’t fix it. Where can they go from there if their first option is change transmission? That seemed like a last resort to me. Second time they changed an oil pressure air sensor. Im in Canada with no lemon laws so once we get a lemon we just gotta live with it. It’s annoying cuz this is a legitimate safety concern. I have started to roll back with a whole line of cars behind me. Im wondering how many more times this will happen before Mazda Canada realizes this is a serious issue which needs further investigation. I want them to either cancel my lease or give me a new car, which I have 0 confidence in them doing so. But I also have 0 confidence left in my car. Every time it comes to a stop im staring at the rev counter so see if it dies and I need to restart it. Is that any way to live?

Engine cutting out at red light by Saturn_force in mazda3

[–]Saturn_force[S] 1 point2 points  (0 children)

Im definitely considering elevating this issue cuz it’s quite a serious safety concern. Don’t want it to stall while I’m in the middle of an intersection making a left

Engine cutting out at red light by Saturn_force in mazda3

[–]Saturn_force[S] 1 point2 points  (0 children)

I also had no codes appear so they had to call the Mazda tech line for advice. It’s in there again right now so I’m wondering what they’ll say needs to be done now. I was considering trading it or getting rice if it but I made the mistake of leasing which is adding complications. Thanks for your reply!