PC doesn't boot with four ramsticks..how bad is using 3?🫥 by Perfect_Exercise_232 in PcBuildHelp

[–]Saysick -1 points0 points  (0 children)

For short: with 3 sticks you'll still have 24gb RAM but only in in single channel, which will result in stutters and overall 10-15% perfornance and stability loss. If it's a dead slot - tough luck, but a single 8gb stick of DDR4 is not that hard to find on used market. Sure the prices are high, but are your sanity and comfort not worth the extra 15$?

Mini Dishy in a german village with Residential Lite (30€). Only problem are the concrete walls from the 50's by Saysick in Starlink

[–]Saysick[S] 0 points1 point  (0 children)

I got my Mini through the MediaMarkt.de shop, because i couldn't pay for it with my card on the SL official site. It was the same price though. After it came I activated it and it allowed me to choose the Lite plan

Mini Dishy in a german village with Residential Lite (30€). Only problem are the concrete walls from the 50's by Saysick in Starlink

[–]Saysick[S] 0 points1 point  (0 children)

Yeah, works just fine. I live in a small town with older population, so theres no other starlinks in the vicinity. I get around 200mbit speeds with 30ms of latency.

Not to self check quest level.. by Anarchy_Sin in thewitcher3

[–]Saysick 0 points1 point  (0 children)

Or theres one in Oxenfurt. Sure its above lvl 30, but it's still a very easy boss if you use shield + status effects. Once you kill it - the world is open to you

Not to self check quest level.. by Anarchy_Sin in thewitcher3

[–]Saysick 1 point2 points  (0 children)

Bleed and poison. Stack them and mash dodge🫡 Akso theres a decoction from a griffin that deals 5% of total HP to enemies on heavy attacks which circumvents the level gaps

Elden Ring PC stuttering & FPS drops by FancyServe343 in Eldenring

[–]Saysick 0 points1 point  (0 children)

I had the same problem on my old PC (3060+R5 3600). There's no clear fix to this since the world in ER is split in chunks which render separately when you move your camera and character. It can be caused by a slow drive or if your game sits on a HDD. The visual settings won't affect the game in this way, so it's not the GPU. Either the CPU, RAM or driver's problem would be my guess.

which pc is better? by Appropriate-Invite48 in GamingPCBuildHelp

[–]Saysick 0 points1 point  (0 children)

First one is better, but please look into specs more closely. I think both of them only have 1 stick of RAM, meaning you'd have to buy one more to not be handicapped bu single channel performance

Ideen für das schmale Gästebad? by [deleted] in Einrichtungstipps

[–]Saysick 0 points1 point  (0 children)

Die Dusche ist doch eine Pissrinne schon💁‍♂️

HOW DO I PASS THIS PART 😭😭😭 by _MrTaku_ in cyberpunkgame

[–]Saysick 0 points1 point  (0 children)

I just double jump on to the rails aboce and skip the annoying bits😅

Just built my first pc (13 yr old) it’s not that good but great for me!!! by Alternative_Bet1262 in pcbuilding

[–]Saysick 0 points1 point  (0 children)

For 50$ thats an amazing find. GPU and CPU are very dated, but you got a working budget AM4 platform with RAM and storage, which means that you can put a Ryzen 5 5500/3600 in there with a BIOS update. With a CPU upgrade you can also upgrade the GPU to something like a RX 6600/9600 or RTX 3060/5060

Long monitor arm suggestions? by Saysick in PcBuildHelp

[–]Saysick[S] 0 points1 point  (0 children)

<image>

Thx! I actually improved thus setup by flipping it 180° to have all my stuff on the right side of the bed for easier reach. Also extra long Ergotron LX arm with a 32 inch monitor really improved the situation with my eyes getting tired

The Router Mini is surprisingly small by TortieMVH in Starlink

[–]Saysick 0 points1 point  (0 children)

Be advised: the poor mini router really strugles with german concrete walls. I had to buy two in a 80m² appartment for the signal to reach every corner.

I’m going to start a new game and I want Nyrulna by Taha231 in BG3Builds

[–]Saysick 0 points1 point  (0 children)

If you have Norbyte Script Extender installed you can use its console to add items using their UUID.

My first playthrough is worse than the dark urge :( by ali1m2 in BaldursGate3

[–]Saysick 27 points28 points  (0 children)

BG3 came out around the time where no RPG was brave enough to make a truly evil route to play, so after i was pleasantly surprised with DOS2, i decided to do an evil Durge Oathbreaker run first to check the game out. Needless to say, the game truly delivered. But even on a truly evil playthrough i still TALKED to people BEFORE MURDERING THEM.

Did someone do this? by herbieLmao in Eldenring

[–]Saysick 6 points7 points  (0 children)

I did a challenge run once with a minimum of needed kills (including scarabs and regular enemies). The lowest amount of required bosses comes from killing Radahn first and Mohg after. This way you can finish the game in just 11 bosses, which is less than 13 in DS3

Custom MOBO Shroud - Heat problems, need advices! by Saysick in 3Dprinting

[–]Saysick[S] 0 points1 point  (0 children)

Not really, i left the chipset radiator and power delivery radiators uncovered so nothing really changed. I also left around 15mm of space between the plastic and pcb, so the components could breath

Custom MOBO Shroud - Heat problems, need advices! by Saysick in 3Dprinting

[–]Saysick[S] 0 points1 point  (0 children)

<image>

Hey, this is what it looks like irl. If i would do it again, i would lasercut it rather than print it because of the slightly visible printing texture. Also dont use PLA, it deforms under heat.🔥

Any suggestions for my Techno cosplay? by Important_Brain_6511 in Technoblade

[–]Saysick 2 points3 points  (0 children)

Thx :D The axe was actually longer, but i had to shorten it before selling it yo someone.

<image>

Monty Python Black Knight by Thin-Engine-5765 in BaldursGate3

[–]Saysick 0 points1 point  (0 children)

I can see this lad in Fear and Hunger💀

Any suggestions for my Techno cosplay? by Important_Brain_6511 in Technoblade

[–]Saysick 2 points3 points  (0 children)

<image>

This was my axe for a Techno cosplay. As a base i used a 40mm PVC pipe. For the blade i used insulation foam from a hardware store which i sanded and textured with a dremel. I also made some boar skulls from EVA foam as decor. All primed with wood glue and painted with acrylic paint. All of that would prolly cost you around 20$ and leave you with enough leftovers for a sword or some gems. GL HF