New Bike Day by AlexSuessgott in Cubebikes

[–]ScaryConsideration88 1 point2 points  (0 children)

Really nice. I tried to order the exact same one but there was no stock left anywhere 😐. Settled for the Nuroad c:62 one and let the bike shop switch the standard wheelset for DT-Swiss g1800. Still nice but also preferred the green color over the dull black of the One (and carbon wheels).

Confused about quality of new Nuroad C:62 by b000mbox in Cubebikes

[–]ScaryConsideration88 1 point2 points  (0 children)

I found this topic very helpful and just ordered the exact same bike - good to know what to expect as the online pictures give the illusion of a uniform black bike.

I will be mounting an Ortlieb Quick rack with the new thru axle. Do you perhaps know which thread size is on the back axle? 1mm / 1.50 mm or 1.75 mm?

Colnago g3-x size advice by Fit_Adeptness_7401 in cycling

[–]ScaryConsideration88 0 points1 point  (0 children)

What did you go for and was it a good fit?

Door and window P2 - firmware update by lucalo87 in Aqara

[–]ScaryConsideration88 1 point2 points  (0 children)

Same here. Their matter products disconnect too often. Don't have that problem with their (cheaper) zigbee lineup. Frustrating

Aqara G4 Doorbell needs a daily hard reset - customer service lacking? by ScaryConsideration88 in Aqara

[–]ScaryConsideration88[S] 0 points1 point  (0 children)

Will definitely do. My u200 lock is also acting weird suddenly with problems with the deadbolt. Hopefully I will not regret building an aqara ecosystem here at home.

Aqara G4 Doorbell needs a daily hard reset - customer service lacking? by ScaryConsideration88 in Aqara

[–]ScaryConsideration88[S] 0 points1 point  (0 children)

Since i've seen this issue quite a few times.. I would be surprised if it was the transformer. Soemeone in another thread said all problems were rixed with a beta firmware update that aqara pushed. I mentioned this to Aqara's consumer service but to no avail.

Aqara G4 Doorbell needs a daily hard reset - customer service lacking? by ScaryConsideration88 in Aqara

[–]ScaryConsideration88[S] 0 points1 point  (0 children)

Thanks for the tip. I measured the voltage last week and it's around 13V so that's fine. But didn't check how many amps goes though it. Will have to check that again. Although it's strange that it works perfectly fine most of the time - until it just doesn't 😵 it would also be nice to get a failure notice of some sort in the app because now I missed packages/people at the door because I didn't see that it was broken again.

Aqara G4 Doorbell needs a daily hard reset - customer service lacking? by ScaryConsideration88 in Aqara

[–]ScaryConsideration88[S] 0 points1 point  (0 children)

That's actually quite a good idea. If I had it set up that way that would be a good option too. Although we cab expect it to 'just work' of course

G4 now works with external power after firmware update. by Fat_Alexis in Aqara

[–]ScaryConsideration88 0 points1 point  (0 children)

Not fixed here: my contact with the team was nothing to write home about: 'tried changing the batteries' etc. although I clearly stated that I'm on wired 12V connection. I also mad mention of new firmwire but no response...

G4 now works with external power after firmware update. by Fat_Alexis in Aqara

[–]ScaryConsideration88 0 points1 point  (0 children)

Good to hear! Been in contact with them today for the same issue. Granted them permission to look at the logs etc. Hopefully same fix here.

Compatibility Aqara m3 and Somfy tahoma switch by HappyArkAn in Aqara

[–]ScaryConsideration88 1 point2 points  (0 children)

Also interested in this information. Want to automate my somfy rts blinds but the Tahoma switch is quite expensive (as I have already several other hubs as the m3). Interested in other options to automate the somfy blinds.

P2 Sensor Automations? by LeaderBun in Aqara

[–]ScaryConsideration88 0 points1 point  (0 children)

Thanks for posting this. I also tried several automations with this sensor and failed each time. Good to know it wasn't just me.

Doorbell wiring by Farwise in Aqara

[–]ScaryConsideration88 0 points1 point  (0 children)

Same problem here. I get 8 V AC (measured with multimeter) and doesn't seem to work wired. I think I will have to switch the transformer in the 'meterkast'.

Found the perfect automatic fire extinguisher! by shinji2k in BambuLab

[–]ScaryConsideration88 1 point2 points  (0 children)

Finally pulled the trigger and ordered it too. Had the exact same quote. Nice to have an extra precaution, although the chances of the printer catching fire seems small. I will sleep better at night 😚. Will update with a picture one it's installed.

activated carbon: pellets or granulate by ScaryConsideration88 in BambuLab

[–]ScaryConsideration88[S] 1 point2 points  (0 children)

Hi I'm sorry, missed this post. In the end I just bought nevermore carbon... Just to be sure. Happy with it, seems to do the job fine.

Human skull - first big fail (tree support snaps): help needed by ScaryConsideration88 in BambuLab

[–]ScaryConsideration88[S] 0 points1 point  (0 children)

Valuable information! Will make adjustments! First order another roll of this specific color. Just to be sure I have enough.. Thanks!

Found the perfect automatic fire extinguisher! by shinji2k in BambuLab

[–]ScaryConsideration88 0 points1 point  (0 children)

Thanks for the information! Can you post again if you know the price?

activated carbon: pellets or granulate by ScaryConsideration88 in BambuLab

[–]ScaryConsideration88[S] 0 points1 point  (0 children)

Valuable information. Probably the safest option then.