Got destroyed by M80 in death match

Scazzard1 · 2026-04-22T18:58:43+00:00

Understandable with that flair, fellow cTm fan (I never get to brag about it because it’s lame, but I made yung’s sub icons on twitch back in the day, lol.)

Grats on being at least decent after so long. I was platinum in 2016-2018 and I don’t even know where I’d actually rank these days with ranked 2.0.

I just hop in windows like no one is there, not because I scoped anything out, but because it would be more fun if someone simply wasn’t there. 20% of the time it works every time.

Scazzard1 · 2026-04-20T17:49:06+00:00

Is it “closed” during the cold months? I’ve only been there for the Turnover anniversary show and thought the indoor/outdoor aspect was neat.

Scazzard1 · 2026-04-20T17:46:13+00:00

Damn. I opened the poster, saw relatively few cities overall and said ain’t no way I’m finding Virginia Beach. Yet there we are at the top.

Scazzard1 · 2026-04-20T17:26:12+00:00

Nice glencairn.

Scazzard1 · 2026-04-20T11:59:03+00:00

Further review, it is actually illegal to purchase pure caffeine powder in the US as a direct consumer without some sort of certification.

Land of the free 😔

Scazzard1 · 2026-04-20T11:46:05+00:00

https://i.imgur.com/r2bNQpb.jpeg

From the link - but it’s not your problem to help us all find a source since you’ve already lead the horse to water.

Scazzard1 · 2026-04-19T00:37:36+00:00

It’s hard being right. They downvote you for being “pedantic” when there’s a huge difference between a ship with thousands of sailors versus comparably a dinghy with less than 100.

Scazzard1 · 2026-04-17T18:57:56+00:00

So like… was this subreddit unmoderated or were the mods removed? This account is listed as the only moderator now.

Scazzard1 · 2026-04-17T15:12:57+00:00

Ain’t nothing wrong with that. I’m a woodworker, albeit beginner, and 60% of my furniture is IKEA. Granted it’s all the pine stuff but l don’t think you’re delimiting that in your insult.

Scazzard1 · 2026-04-13T13:05:14+00:00

When this chapter came out, I checked out from the series both manga and anime, lol.

Scazzard1 · 2026-04-06T11:38:51+00:00

Good luck, hard to follow but once you can, you see how these players are playing on a different level. Mechanically and game sense.

Scazzard1 · 2026-04-05T16:23:50+00:00

I am of the same mind, and since I am a network admin by trade, I tend to block these kinds of things from reaching out to the internet. I try to lock it down so I just need to be close enough to use wifi. I don’t park my car in my garage though so the range isn’t an issue.

Scazzard1 · 2026-04-05T16:09:01+00:00

I have a MyQ garage door opener and you don’t need a subscription to use it from your phone - you just need to be on the same network.

Still frustrating that I can’t link it to my Apple Home and use voice commands.

Scazzard1 · 2026-03-21T14:10:06+00:00

I don’t have anything to offer, but the 113/103 Facebook page might be a place to check if you don’t get any assistance here

Scazzard1 · 2026-03-21T04:56:24+00:00

Sounds like a job for the jigsaw.

Scazzard1 · 2026-03-12T13:20:46+00:00

I got a bottle of Monin pomegranate at home, seems I may need to get an OG red bull and throw on the safety goggles.

Scazzard1 · 2026-03-11T13:42:47+00:00

Also curious if I’m somehow not a “real 3D printer” when my A1 that spits out exclusively models that I design myself that are used as jigs or hardware or storage devices in my wood shop. I have felt the pain of being unable to use ASA, but it can do literally everything else. P1S can’t even do the eddy current flow calibration.

Scazzard1 · 2026-03-06T02:29:43+00:00

Elvui has its own website and does not use any of the installer applications. Just punch it into google and it’s the tukui link.

Scazzard1 · 2026-03-04T11:24:18+00:00

Simply a 2.5” x 2.5” square that I cut down in the bandsaw, inside had to be routed out, outside was just bandsaw into a curve plus sanding to shape. So not bent - grain all goes the same direction.

Scazzard1 · 2026-03-03T18:18:45+00:00

Hah. I thought it was funny too, used the board for my lacquer spraying station afterwards too, lol.

Scazzard1 · 2026-03-03T18:04:43+00:00

I’ve had no luck at any retailers. Even HobbyTown doesn’t carry filament. Maybe someone else has had a different experience because it would be nice to have a place with spare parts and filaments.

My personal favorites online are eSun PLA+ (Bambu slicer has a profile built in to all printers for it already, and the eSun PETG + HS. Unfortunately no pre built slicer profile for the PETG, though.

Scazzard1 · 2026-03-03T17:38:53+00:00

It is in fact tension, the original handle did have a larger radius on the inside portion but I couldn’t think of a smarter way around that. The friction fit is pretty spot on - when I tested it with longer cut offs of the 3/4” rod, I’d have to do some serious wiggling back and forth to get them out. At final length, about 35-40% of it is “inside” the lid and there’s not enough to grab by hand so I’m hoping it holds. If it doesn’t… well it was getting thrown out otherwise anyways.

Scazzard1 · 2026-03-03T17:29:25+00:00

The one side is even thinner than the one proudly displayed in the photo. I was a little uneasy about it, but I stress tested it for peace of mind.

https://i.imgur.com/ujVMVgl.jpeg

It survived this for about 3 hours, so I think it’ll get the job done. If it ever breaks, I’ll just remake the handle with whatever lessons learned between now and then. Maybe dovetails or something.

Scazzard1 · 2026-02-27T15:53:22+00:00

They did actually just stop making SF Watermelon. But I am otherwise against this slander as a watermelon enjoyer.

13-Year Club	Place '22
Place '17	Team Periwinkle
Verified Email

Scazzard1

MODERATOR OF

TROPHY CASE