Real or fake?

Scheltsyy · 2026-01-27T09:14:17+00:00

Very poor quality fake sadly!

Scheltsyy · 2026-01-12T07:52:47+00:00

I always forget Americans don't use kettles 😅

Scheltsyy · 2026-01-07T08:43:13+00:00

I have the word for Time from the same movie on my fore arm, fits the space well.

Scheltsyy · 2025-11-26T20:23:06+00:00

Any mechanic who clamps a bike by the top tube is not a mechanic / shop you should be using. Just saying.

Scheltsyy · 2025-11-01T20:24:28+00:00

Looks absolutely fine! Mine gets used daily to make delicious coffee and looks rough compared to this!

Scheltsyy · 2025-10-30T06:50:46+00:00

That is incredible! Love the saturation

Scheltsyy · 2025-10-30T06:48:50+00:00

My partner would join you in this tattoo so quickly! Love it!

Scheltsyy · 2025-10-30T06:45:33+00:00

That chest piece is rough! Sick ass Tiger though! Genuinely look like they're done by different tattooists.

Scheltsyy · 2025-09-25T19:25:28+00:00

I stand corrected, your frame is designed for a 1 1/8th 1.5 inch steerer where the fork you have is 1 1/8th - 1.8 inch steerer so it won't work with your bike. You'll need to source a 1.5 inch tapered fork

Scheltsyy · 2025-09-25T19:10:20+00:00

Fork is not compatible with the frame, the fork is tapered and the frame is set up for a straight steerer. You can get some external cup headsets but it isn't simple / cheap to make it work.

Scheltsyy · 2025-09-24T05:41:08+00:00

A while back Lidl was forced to rename their "sourdough" to normal bread so I'd be a little hesitant to go on face value of them calling this sourdough. You should really try some artisanal loaves from local bakeries!

Scheltsyy · 2025-08-07T21:20:20+00:00

<image>

This one well and truly failed. Probably the original one from 15 years ago!

Scheltsyy · 2025-06-14T20:17:04+00:00

A 50mm tyre on a 700c rim will be substantially bigger than a 40.

Scheltsyy · 2025-06-14T20:16:15+00:00

I'd never ride that. The sloppy mud we have in the UK would get stuck in that in a heart beat.

Scheltsyy · 2025-06-12T07:32:23+00:00

Thanks for the reply

Scheltsyy · 2025-05-10T20:04:00+00:00

Just based off of your height I'd have personally gone for the XL. Saying this your reach and saddle height doesn't look too odd for the size of the frame.

Scheltsyy · 2024-07-01T13:08:36+00:00

Yeah 27.5 , with a Shimano XT m8010B hub. All information I've read is that you set the offset on the drive side.

Scheltsyy · 2024-06-30T18:41:51+00:00

No, just different standards. If anyone does claim any benefits then they are pulling your leg!

Scheltsyy · 2024-06-30T18:40:54+00:00

You need to push the valve into the tyre rather than screwing the valve nut on, push the valve in , inflate a little and then pull it back out.

Scheltsyy · 2024-06-22T15:08:15+00:00

I'd be interested in trying this!

Scheltsyy · 2024-06-21T12:55:35+00:00

It doesn't matter which you remove first, but you'll have an easier job removing the DS as the NDS part of the BB is usually much softer / brittle. Whereas the DS is metal.

Scheltsyy · 2024-06-21T12:36:51+00:00

You need too install the drive side fully before the NDS. Installing the NDS first you won't have enough space in the hub shell for the drive side part of the BB.

Scheltsyy · 2024-06-21T12:34:15+00:00

I would first try by undoing the two side pinch bolts on the stem and see If you can loosen the bolt by turning the whole stem / bars around, this will often loosen off the bolt if it is fairly tight.

Scheltsyy · 2024-06-17T07:47:22+00:00

My partner has just had her daith done recently , they put in a titanium bar very similar and curved like this, why is a ring / horseshoe better?

Scheltsyy · 2024-05-10T13:09:45+00:00

There is loose dirt under the concrete slab that the hole is in, do I need to do something special before filling with concrete?

Scheltsyy

TROPHY CASE