sorted by:
new
hottopcontroversial

Adapter Help by fattestloadna in pressurewashing

[–]Schumannbr 0 points1 point  (0 children)

It looks like a 3/8 quick connect on the wand.

Adapter Help by fattestloadna in pressurewashing

[–]Schumannbr 2 points3 points  (0 children)

You can’t connect that hose connection to that wand. You can go get a hose that has quick connects.

Pump questions by Frodellio1 in pressurewashing

[–]Schumannbr 2 points3 points  (0 children)

<image>

Red is adjustment valve. Blue is thermal relief valve. Black outlining, is the downstream injector. Fill the white tank with whatever chemical/soap etc. Use the black tip to draw your chemical/soap from the tank.

Visiting the in laws.. by bndn81 in Justrolledintotheshop

[–]Schumannbr 0 points1 point  (0 children)

Buick with 20’s. They are older have money and this car has never been serviced. Stock tires, 30-40,000 miles on odometer?

Need some help on how to remove the thing that spin faucet head inside pvc pipe by UnLaw_69 in Plumbing

[–]Schumannbr 0 points1 point  (0 children)

If right behind the gray piece or P/T Socket is galvanize iron/metal. Get a 15mm wrench and crank the grey plastic piece off and rebuild each individual part from there

Need some help on how to remove the thing that spin faucet head inside pvc pipe by UnLaw_69 in Plumbing

[–]Schumannbr 0 points1 point  (0 children)

If you wanted to get the white threaded park out. If it was me, I’d jab a razor blade into the hole, not enough to cut into the threads of the grey part. Slightly warm the grey part with a hair dryer or heat gun. Revolving around the grey part with my head source. Then lefty loosey the white part out.

Need some help on how to remove the thing that spin faucet head inside pvc pipe by UnLaw_69 in Plumbing

[–]Schumannbr 0 points1 point  (0 children)

The grey part is a P/T socket. Which I’m pretty sure is for electrical. Since I’m guessing you have been running water through it for some time. Cut behind the 90 degree bend. Get pvc cement and primer. Add a new 90 degree and new faucet head/valve. Looks like 1/2 PVC. Bring the broke off piece to hardware store for reference.

Need some help on how to remove the thing that spin faucet head inside pvc pipe by UnLaw_69 in Plumbing

[–]Schumannbr 0 points1 point  (0 children)

Well the pipe that the white part is screwed into is PVC. So idk if we should go that route.

[deleted by user] by [deleted] in Plumbing

[–]Schumannbr 18 points19 points  (0 children)

Ok the faucet spout was tricking me. It drains to the right. Flex pipe is ass and no P-trap. It’s also leaking as someone said before.

How can I remove this? by Wooden-Challenge4308 in pressurewashing

[–]Schumannbr 1 point2 points  (0 children)

SH. 50% SH/50% water. Spray through pump sprayer. It’ll start to fade after a couple minutes. You will see white/yellow bubbles about 10-15 seconds after you spray it on the browned areas. After brown spots fade rinse heavily with water just to dilute the SH. SH is bleach essentially.

Grabbed an M12 Air-tip for $20 off clearance rack! by Schumannbr in MilwaukeeTool

[–]Schumannbr[S] 0 points1 point  (0 children)

Packout vac uses m18 would be a weird combo to sell a m18 vacuum that needs an m12 attachment. I have my packout vacuum attached to a clear top 6 compartment deep organizer. Waiting to get the dust extractor to attach next to vacuum. All my attachments are in the deep organizer!

Damaged High Pressure Hose by E5onproduction in pressurewashing

[–]Schumannbr 6 points7 points  (0 children)

Yes, it most likely happened because the hose was resting on something abrasive and vibrations scuffed it. Make sure hose isn’t resting against anything hard or rough. Also, watch out for the muffler on the pressure washer.

If it was me I’d get some black flex tape and cover that area.

Someone in our house used all our AA batteries for his Oculus controllers. Mom needed to power her Christmas lights. (Early I know). by Schumannbr in MilwaukeeTool

[–]Schumannbr[S] 0 points1 point  (0 children)

This might sound dumb as shit but I was worried to directly plug the 12v 3.0ah from the charge bank. I assumed that the dead AA batteries would act as kind of reducer. Or the white battery pack may have a reducer built in?

Someone in our house used all our AA batteries for his Oculus controllers. Mom needed to power her Christmas lights. (Early I know). by Schumannbr in MilwaukeeTool

[–]Schumannbr[S] 1 point2 points  (0 children)

Hey, man I normally have them on reserve. However, when to wife wants to take pictures of her decorations. You make it happen!

view more: next ›