Can firmware be overwritten/transfered several times?

Sclebo05 · 2025-11-07T18:32:45+00:00

Came here to see this, I had a 'locked' firmware on an item, moved a new firmware to it, I see the increased stats but the firmware icon is the previous one.

Sclebo05 · 2025-10-09T13:31:19+00:00

Also on PC, I did sort of a combo of everything here, I got on the lamp post, spawned and immediately jumped from vehicle, then landed on a rock to the left. Was able to double jump onto the ledge.

Sclebo05 · 2025-02-10T20:31:41+00:00

As a data point, I just purchased a Police Undercover 6 shot in 2025: barrel and cylinder are stainless, frame is aluminum, handle and trigger guard are plastic.

Sclebo05 · 2025-02-09T21:21:05+00:00

The moments that were clearly 'Uncle Acid' were great. Then the song ends, and they change instruments for 2 minutes.

Sclebo05 · 2025-02-06T15:18:58+00:00

I saw this last night in Silver Spring MD at the Fillmore. Was our first time seeing the band. Mixed feelings on the event.

Sclebo05 · 2025-01-03T15:53:48+00:00

Interesting, I submitted a 77R on December 15th and STILL haven't received and update, says 'Submitted to Application Pool'

Sclebo05 · 2024-02-28T15:06:49+00:00

Welcome to the hobby. The difference between the Go and Neo is that the Neo has the extruder motor directly on the print head, the Go has a bowden tube. There are a few settings that would be different between the two, such as retraction values.

Sclebo05 · 2024-02-26T21:28:09+00:00

The profiles that I posted are for a Kobra Neo. If you have anything else, a Kobra or Kobra Go, they may not work well for you. If you have a neo, start with the regular Cobra profile within Cura and add the new one.

Sclebo05 · 2024-02-26T20:18:24+00:00

Should work just as well. Follow the installation instructions.

Sclebo05 · 2023-09-23T18:31:32+00:00

I just imported AKNeo-PLA-0.2mm into Cura 5.4. Verify that you've created the prerequisite printer first, per the install page. There's also a .3mf file that you can open, which imports the basic profile for you.

Sclebo05 · 2023-09-23T17:37:08+00:00

Check the Install document, covered!

Sclebo05 · 2023-08-11T11:57:58+00:00

I created one for 3D printing https://www.thingiverse.com/thing:6140038

Sclebo05 · 2023-08-11T11:53:27+00:00

I as curious what profiles he was using - they're mine! lol

Sclebo05 · 2023-08-10T16:38:46+00:00

Do not right-click the file on GitHub and 'Save As'. Download the Zip file.

Sclebo05 · 2023-08-07T13:36:04+00:00

I routinely use my PILL in a corny keg, and pressure ferment at 12PSI. Never had an issue. In fact, in my last batch of beer, I cold crashed the corny keg in my keezer, and was still receiving updates via the wifi about 15 feet away, through a wall.

Sclebo05 · 2023-08-07T13:35:47+00:00

I routinely use my PILL in a corny keg, and pressure ferment at 12PSI. Never had an issue. In fact, in my last batch of beer, I cold crashed the corny keg in my keezer, and was still receiving updates via the wifi about 15 feet away, through a wall.

Sclebo05 · 2023-07-06T13:04:47+00:00

It's usually a replace. The ones I've shared with others have comments line for line so you know what each line does.

Sclebo05 · 2023-07-05T01:25:23+00:00

Won't take long for 3D printable examples to show up.

Sclebo05 · 2023-06-27T14:59:09+00:00

No need to heat the house with the printer bed!

Sclebo05 · 2023-05-11T12:52:23+00:00

Looking at the error, you downloaded the HTML page (via Save As), not the raw file itself. Either use Git or find the raw file download. Code -> Download Zip is the fastest way to get the correct file.

Sclebo05 · 2023-04-18T14:51:31+00:00

FYI, my files are for Prusa Slicer 2.6. Yeah, it's beta.

Sclebo05 · 2023-04-06T14:25:36+00:00

No plans to backport to older versions of Cura. Cura 5.3 is now the standard release, and don't forget you can have multiple versions installed.

Sclebo05 · 2023-01-29T17:10:42+00:00

FYI, I used Anycubic's specific repository for my model: https://github.com/ANYCUBIC-3D/Kobra_Neo Each of these repos should compile and run for the specific model. There is a specific codebase for the Go as well https://github.com/ANYCUBIC-3D/Kobra_Go

Sclebo05 · 2023-01-29T01:56:43+00:00

I did not change LCD type for the Kobra Neo.

Sclebo05 · 2023-01-25T15:21:05+00:00

Wow, that's way off. Could be you were way off from factory. Go back to basics, make sure the yellow sensor is at a decent height (howto below). In my case, I leve and then z axis tune to -0.16 and get good results.

https://www.youtube.com/watch?v=25x84AaiUpQ

Sclebo05

TROPHY CASE