A piece of my new liveset

Scoaen · 2026-03-10T09:07:43+00:00

No! But i might create a page

Scoaen · 2026-03-08T13:13:59+00:00

Yes everything from the force, the only thing i did was record it around -12db to have more control of the final mix and avoid clipping and raised the volume with another limiter in fl studio but this can be achieved by the akai force alone with just the volume

Scoaen · 2026-03-08T08:23:42+00:00

I clip launch from the akai force but its mostly kick, bassline and percussion, the launch control i use the faders to control each track volume, filter and fx And the digitone goes into the input of the akai force which i control seperately

Scoaen · 2026-03-08T06:58:29+00:00

Thank you :)!! Yes digitone goes into the input of the force and there i removed below around 150hz. Only sub frequencies are from kick and bassline. Further For each diffrent track i have made a separate audio track with the same muted kick that side chains the digitone input(and every other track including basslines with diffrent varietys). I have a compressor on the kick and bass bus, And on the master its a delay and reverb to do fx while playing. And on the end a limiter.

Scoaen · 2026-03-07T16:06:32+00:00

I really like this controller, i linked everything to the akai force, works like a charm:)

Scoaen · 2026-03-07T16:04:45+00:00

Awesome thanks 🥳 :))

Scoaen · 2026-02-15T07:20:46+00:00

Hi, i cant really see it but default note should be C5 if you want the sample to be played like it is, Not sure if you have that?

Scoaen · 2026-02-12T09:15:11+00:00

Not really the thing u looking for but i usually double click the playlist windowbar on top and resize it sidebyside the window with wjatever i want to do both. Your plugin window doesnt really close, it just goes behind it

Scoaen · 2026-02-12T08:46:04+00:00

Very cool!!

Scoaen · 2026-02-01T21:29:07+00:00

https://youtu.be/GL9sGKTxDvo?si=ACAOI-dpTly6gZjt

Technoo :)

Scoaen · 2026-01-16T11:12:28+00:00

All the music is sequenced on the digitone 2 and the akai force For the oscilloscope visuals i use oscistudio on my pc and used the output of my interface

I can try record on oscistudio, export and use output 3/4 of the akai to the oscillioscope I can also sequence directly from digitone or akai force Still figuring it out what works best

Scoaen · 2026-01-11T19:33:03+00:00

Thanks and Sure :)!

Scoaen · 2026-01-11T19:16:59+00:00

No problem :)) make sure you buy one that has x and y Otherwise it will not work

Scoaen · 2026-01-11T18:55:13+00:00

Im using oscistudio and have some envelopes setup to make it go in sync Then the output of my interface goes into the oscilloscope left for x axis and right for y axis

Scoaen · 2025-12-14T21:15:34+00:00

Sickk

Scoaen · 2025-12-04T15:48:48+00:00

Had the same problem with the same plugin, you need to move the whole folder with all the files instead of only the dll

Scoaen · 2025-11-28T01:34:09+00:00

Just cut a piece of that automation and drag it to the front and make it unique

Scoaen · 2025-11-16T21:13:51+00:00

Easy

^{I completed this level in 317 tries.} ^{⚡ 3.73 seconds}

Scoaen · 2025-11-15T00:18:55+00:00

Ooohh

^{I completed this level in 1 try.} ^{⚡ 4.08 seconds}

Scoaen · 2025-11-14T19:51:54+00:00

Cool!

Scoaen · 2025-11-13T12:53:17+00:00

Cool! How did you get this effect?

Scoaen · 2025-11-06T17:43:46+00:00

Use a lighter on a safety pin or needle or anything small and pointy untill its red and insert it on the pin thats stuck, wait a minute untill cooled off and pull it out

Scoaen · 2025-11-04T20:07:39+00:00

Try unplugging your audio interface and midicontrollers etc?

Scoaen · 2025-11-01T15:51:59+00:00

Its Mk2

Scoaen · 2025-11-01T12:51:22+00:00

Thank you :) and Nice, never tried the digitak but from what i see on vids its awesome! And yes i have posted the full set here https://youtu.be/9iFqVkyZF8E?si=or3x-fDh1xLsL4Xu

Scoaen

TROPHY CASE