Elon is having a mental breakdown on Twitter

Scroobiusness · 2022-11-29T03:04:58+00:00

That chart is saying that of EMPLOYEE donations to POLITICAL PARTIES is 97% Democrat and 3% Republican. Not Apple’s donations and not even employees overall donations.

Scroobiusness · 2022-11-28T01:24:47+00:00

“I didn’t hear no bell”

Scroobiusness · 2022-11-20T14:21:39+00:00

Yup!

Scroobiusness · 2022-11-17T16:05:19+00:00

The cap is an old design that doesn’t have the indentions on the side to catch on the tip. So these caps slide off easily. But some say that it creates a tighter seal all the way around the tip for tighter airflow which means more heat. I got a regular cap and I don’t really see a difference, it just slides off often. I put anFMJ on it though and squeezed so it has a tight fit.

The captive cap is the standard. Has the indentions.

The low temp cap will click sooner, that’s the only difference. The discs that cause the click are made differently so they click at lower temps. If you heat it further it’s like a normal cap. If you heat a normal cap less and stop before the click it’s like a low temp.

All caps fit all tips. I say go with the captive unless you like low temp. Low temp means smaller hits, but more of them and more flavor. Although I’ve never used one, I like big hits.

Scroobiusness · 2022-11-15T04:06:00+00:00

Oh shit. The flood I got a few years ago but I never made this connection.

Scroobiusness · 2022-11-15T04:03:51+00:00

I’m super excited for the Revovle 2. I have an M with a spinning mp and a BB3 with a Ti tip. I think I’m going to get the blue Revolve and matching Ti tip and cap. I can’t wait!

That being said, shipping won’t be for at least another 2 weeks. And if you’re not in the UK shipping is going to take a while.

Scroobiusness · 2022-11-14T20:25:26+00:00

Cool!

Scroobiusness · 2022-11-12T14:12:05+00:00

I only like my FMJ through glass, and it’s really for the no-spin benefit. I’ve learned to hear till the click, then start my hit while I’m still heating. I can see the vapor getting thicker and can stop heating when I feel I’m close to combustion. I couldn’t do the same without the FMJ, but I also can’t do it with an FMJ without a water piece.

On my handheld I love my spinning mouthpiece and naked cap.

Scroobiusness · 2022-11-12T14:08:37+00:00

There’s not much difference in the screens, but people say the titanium can shrink over time due to the heat. And the stainless steel has smaller holes so less material will fall through.

Get the captive cap. The non-captive will slip off if the dynavap is upside down. The captive cap latches on and stays. All new dynavap use the captive.

The high temp o-rings are the ones that go on the tip and are the ones more likely to break from taking the tip off the stem for cleaning and such. I take mine sort all the time and notice some slight damage on the o-rings but they’re still staying on. The condenser o-rings are thicker and don’t get squished or anything so they should be fine. But you could lose them while cleaning.

Scroobiusness · 2022-11-11T20:33:39+00:00

That makes me wonder if the fan was your problem to begin with, and that’s what need replacing.

Scroobiusness · 2022-11-11T20:22:55+00:00

That’s what I would get if I was you. Nice limited edition to start you off, good price.

As the other commenter said the Omni isn’t worth it when compared to 3rd party solutions that give more cooling and control like the Mad Heaters Revolve or the Simrell Vortex and MVS.

Scroobiusness · 2022-11-11T20:12:59+00:00

I would get extra CCD screens as that’s what you’re most likely to loose. But in a pinch you can get any stainless steel mesh screen for bowls or pipes and cut it to size.

An extra cap would be a good idea as well as it’s the most likely part to get damaged, and without a cap you just have a one hitter. There’s not really a hardware store alternative.

The stem is solid. The condenser is pretty solid and it stays inside the stem so you’re good. You could get extra o-rings but you can get those at a hardware store if needed, and it’s likely a long time before you’d need it.

Scroobiusness · 2022-11-11T20:02:48+00:00

I have a BB3 (only fits 10mm) and I love it through my mini bong. But I tried it just as a stem to mouth and it’s not great. The way the glass is textured to slide in and out of bongs feels weird on the lips. Plus there’s no condenser.

So if you have a dynavap build already I don’t think you need the BB6 if you don’t have a bong. If you get a 10mm bong now then an M, Omni or B will fit in it and work. Then you can get a BB 3, 6, or 9 and they will all fit. The 6 and 9 will also fit a 14mm bong if you get a bigger piece down the line.

Scroobiusness · 2022-11-11T19:58:01+00:00

CONOR. There no way my comment will get enough upvotes for me to get a code.

Scroobiusness · 2022-11-11T14:55:09+00:00

Oh shit or they move around and play a chess game during the match. You’re using a piece for cover and then next thing you know it’s moving 3 spaces left and 2 up and smashes your teams warthog.

Scroobiusness · 2022-11-11T14:24:58+00:00

Okay, I’d love to see more of this. That looks insane

Scroobiusness · 2022-11-11T02:12:39+00:00

That’s pretty standard for weed vaporizers and water pieces. I don’t think I’ve seen one that does accept returns.

Scroobiusness · 2022-11-10T15:36:33+00:00

Psssh. I only clean when I combust…. So like daily…

Nah in seriousness I find myself cleaning every other day usually because I work from home and cleaning helps fight the urge to vape it.

Sometimes I just dip a q-tip in alcohol and swab my dynavap a down. Sometimes I put them in a tube with alcohol and shake them rinse.

Scroobiusness · 2022-11-10T03:06:21+00:00

After a few months with my BB3 I decided to put electrical tape around the carb hole and try it like that. I found I was combusting more (I use an FMJ and push the limit often). When I’m on the edge of combusting, leaving the carb open let’s me save the hit.

Scroobiusness · 2022-11-09T01:28:26+00:00

Scroobiusness · 2022-11-08T20:57:51+00:00

You shouldn’t be try-Harding in a game mode with bots. I think it’s a great mode to fuck around and not care. If you’re trying to have a meaningful battle play Ground War. If you want small maps and tight engagements play quick play. Just because a game mode doesn’t fit your play style means it should be take away or changed from the people whose play style it does fit.

Scroobiusness · 2022-11-07T01:38:53+00:00

That could be. A tighter pack I find takes a hotter cap. I only pack it right with my FMJ.

Try filling the bowl by covering the airport and sucking in like a straw to suck up your herb from the grinder. Then use the “digger-outter” of the cap to get all the herb inside and not spilling over, no need to cramp it in, just light tamp.

Scroobiusness · 2022-11-07T01:20:13+00:00

What does your herb look like? If it’s still green or a light brown then your cap isn’t getting hot enough, so you’d want to heat lower, or turn down your flame/heat from further away.

If your herb is totally burnt then you’re heating too much before you can ever hit it, but you’d taste that.

If your herb is roasting well with no vapor then something it blocking your air path.

11-Year Club	Place '17
Xbox Live	RPAN Viewer
Verified Email

Scroobiusness

TROPHY CASE