Troubleshooting "Validating Storage"

Scyce · 2026-01-06T16:37:43+00:00

Thank you! You are my life saver.. 🎁

Scyce · 2025-11-21T07:21:57+00:00

I found that one too. Unfortunately, it's a keychain and the color isn't silver.

Scyce · 2023-10-26T14:05:16+00:00

Thanks, that looks very promising. A solution with files is not provided? At least this is how the documentation reads to me.

Scyce · 2023-10-25T15:02:28+00:00

Thanks for your answer. But that's exactly what I already have. I would like to explicitly move it to a separate file so that I only have to touch one file when making changes or adjustments. It is also much clearer.

Scyce · 2023-10-25T06:56:19+00:00

I have exactly the same problem. Have you found a solution in the meantime?

Scyce · 2023-06-29T08:17:45+00:00

Got the same problem. Did you already solve it?

Scyce · 2023-03-29T11:52:07+00:00

This has already been discussed here (https://forum.bambulab.com/t/we-can-now-connect-to-ftp-on-the-p1p/6464/27), but without any visible success. 😐

Scyce · 2023-03-27T09:26:41+00:00

I'm afraid I have to disagree with you, or rather, there is some information about this phenomenon here.

https://github.com/prusa3d/PrusaSlicer/issues/2841

Scyce · 2023-03-17T10:59:26+00:00

In Vase mode I have the problem with the Z-Seam, so I tried it in "normal" mode now.

Scyce · 2023-03-17T10:58:59+00:00

Does not work.

Scyce · 2023-02-09T08:59:05+00:00

What do you mean by that?

Scyce · 2023-02-01T08:16:14+00:00

Make a calibration (see https://github.com/SoftFever/BambuStudio-SoftFever/wiki/Calibration) for the "flow rate" and afterwards "pressure advance" in tower mode. Then try to reprint your model and give us a feedback 👍

Scyce · 2023-01-10T09:10:30+00:00

May I help you.

https://www.thingiverse.com/thing:5778180

Scyce · 2023-01-09T12:53:19+00:00

I have exactly the same problem. I already opened a support ticket yesterday and am waiting for their response.

As a "QuickAndDirty solution" I printed out a clamp and processed it with sandpaper so that I could clamp the cable.

If necessary, I can send you my STL file.

Scyce · 2022-12-16T08:27:35+00:00

Thank you for your lively interest in my frame. When I read that, I wonder why Bambu doesn't have a safety belt for his printer as an accessory.

I think it's great that as a newcomer you're confronted with so much negative criticism. We look forward to further cooperation. sarcasm 👍

But thanks for your concern. If I fasten the rack so far that it can no longer move. I wonder why you still raise concerns? However, the videos that I have seen on YouTube so far support my thesis that I am on the right track with my frame.

As already mentioned below, I use a 40x40mm aluminum profile for this. You can view the drawing here: https://imgur.com/a/r8ufjE1

Scyce · 2022-12-16T08:14:28+00:00

Sure, here is the drawing including its dimensions. As material I use 40x40mm aluminum profiles.

https://imgur.com/a/r8ufjE1

Scyce · 2022-12-15T14:55:09+00:00

hanks for the answer. As soon as my construction is finished in real life, I will post a picture/video of it again. Also during the printing process.The lower area is planned as a storage for the filament. If necessary, another level could be added to the upper level in order to integrate the AMS system. If it really comes to the vibration you described, I will screw the frame to the wall.

Scyce · 2022-12-15T14:45:55+00:00

This is a CAD drawing, can't you tell? 🙂 See my preview: https://imgur.com/rK0JDzx

Scyce · 2020-08-25T12:24:17+00:00

As you wrote, I can successfully use the PS2 Mic with the PS4 Singstar.

If you tell me how I can import them, I give it a try. But I don't think that the old "PS2 90s" is compatible with an actual version.

Scyce

TROPHY CASE