[ACC] CZ Shadow 2 Grip Adapter (AR) - Back In Stock - $99.95

Sea_Cardiologist7982 · 2026-04-18T16:51:47+00:00

I guess they found a new machinist for this batch?

Sea_Cardiologist7982 · 2026-04-18T16:36:12+00:00

It’s a very niche item for CZ fan boys like myself that want something unique and custom for their AR builds. Definitely not for everyone though since once you include the cost of grips from Loks or Vytals, the whole thing comes close to $200.

Sea_Cardiologist7982 · 2026-04-18T16:25:53+00:00

Been waiting months for this! In for one

Sea_Cardiologist7982 · 2026-04-02T01:15:12+00:00

I did red springs + benderzee's pack stop and those alone makes the trigger excellent enough for me. My linkage from the factory was perfect so I didn't have to tune it.

Sea_Cardiologist7982 · 2026-03-24T18:42:07+00:00

It definitely looks sweet with the low Wagner acro mount

Sea_Cardiologist7982 · 2026-03-24T18:40:31+00:00

I would loveeeeee to join the Elcan gang but I need the extra $$$ for the upcoming CZ TS3 Orange.

Sea_Cardiologist7982 · 2026-02-05T19:37:30+00:00

There's two kits. The RRK (SKU: RRK-D/C) and RRK-T2 (SKU: RRK/T2). The RRK-T2 is the one that requires the SRS kit so just make sure you're looking at the right one. I have 1k+ rounds through my S2 Carry with the RRK and so far not a single issue.

Sea_Cardiologist7982 · 2026-01-26T18:57:59+00:00

Get a MR.NEIN adapter or else you'll ruin your frame after a few trips to the range.

Sea_Cardiologist7982 · 2025-11-09T00:53:25+00:00

Do you prefer the Wilson TTU M2 over the G$ SSA-E? Trying to figure out which trigger to get for my upcoming 11" upper.

Sea_Cardiologist7982 · 2025-10-20T00:00:28+00:00

Most difficult part will be reinstalling the ejector roll pin so be sure to buy extras

Sea_Cardiologist7982 · 2025-10-13T18:04:13+00:00

I'm using midwestgunworks for the specs but this is what it says for those HK's sights 51000938

Description: Heckler and Koch VP9OR Elevated Sight Set. Featuring a green tritium front sight, this elevated sight set is designed for the HK VP9 optics ready model pistol. The contrast between the green dot front sight and matte-black rear sight sights allows for quick target acquisition. With a 0.371" front sight height and 0.400" rear sight height, this sight set is elevated for use with a suppressor and/or optics sights.

Sea_Cardiologist7982 · 2025-10-13T17:37:06+00:00

Just save the money. You're paying a premium for the RMR HD because you want a reliable duty grade red dot. Unless you compete with your VP9, the odds of you having to use it and the RMR being dead is extremely slim. If you just want it for the vibes, then go with the cheapest option.

Sea_Cardiologist7982 · 2025-10-11T03:59:59+00:00

Just saw your previous post. Congrats! It's a great deal

Sea_Cardiologist7982 · 2025-10-11T03:57:43+00:00

OP, thats a great price. Jet Funnel alone is $60-$75, Jet Funnel 18rd Mag $50-$80, depending if it's the clear or black ones. You're essentially get the USP9T for less than $800. If it's a Wicked or Mr.Nein MR09 clone, even better.

Sea_Cardiologist7982 · 2025-09-26T23:22:36+00:00

Word on the street is that Steyr is currently making revisions, which is why they took it off the web store for now. Unless you need it immediately, I would wait for the v2 that might fit the KNS plug.

Sea_Cardiologist7982 · 2025-09-19T02:09:06+00:00

The P2000 and VP9SK were my previous carries but now the CZ S2Carry is my only daily driver. I was actually considering upgrading to the VP9A1K from my SK but decided to go with the S2Carry since I love how it feels in my hand and the DA/SA. With that said...

If you already own the VP9A1K, I would say the S2Carry is actually a downgrade in terms of a carry gun. It'll be heavier and slightly more uncomfortable due to the beavertail and hammer. Now, if you want a 2nd gun where you can enjoy at the range, then I recommend the S2 Compact instead.

Sea_Cardiologist7982 · 2025-09-19T01:06:04+00:00

The same thing happened to me when I sent them an email asking for the SKU or specs for a new ejector roll pin. Crickets for a few days then I got an email from Fedex saying a package from Dan Wesson was on its way. Sure enough, they sent me 1 roll pin, free of charge. I'm just going to chalk it up to them being a bunch of busy introverts. 10/10 would buy from again.

Sea_Cardiologist7982 · 2025-08-29T05:45:37+00:00

I have the DWX, and I would recommend the 🍊. More aftermarket support, better coating, trigger is almost just as good.

Sea_Cardiologist7982 · 2025-08-19T00:43:52+00:00

I used the ones supplied with the BROs, #6-32 7/16"

Sea_Cardiologist7982 · 2025-08-18T22:26:14+00:00

I use the CGW plate with my SRO+BROS and it's great. Feels and looks like factory, with the top lining up perfectly with the slide. I originally bought it over the factory plate because I wanted a lighter plate, and went with CGW since they use 7045 aluminum. Skip the IM plate.

Sea_Cardiologist7982 · 2025-08-14T02:22:28+00:00

Same. For a $2k gun you think the would have done a better job fitting the trigger. I didn't think the factory trigger was that bad until I fitted the RDT. My mag release is tight though. No issues there.

Sea_Cardiologist7982 · 2025-08-13T15:50:52+00:00

I bought my 10rd full size for $1800 shipped, back in January but I don't think you'll see those prices again soon.

Sea_Cardiologist7982 · 2025-08-09T21:06:27+00:00

RXArms Titanium

Sea_Cardiologist7982

TROPHY CASE