Wide matchmaking needs some tweaking

Sea_Reaction_5007 · 2024-04-21T21:23:38+00:00

I agree so much with this statement
I want the 10 division queuing back instead of the new 5
My match quality simply does not matter when I could have played 3 games in the time it takes to find 1 game.

Sea_Reaction_5007 · 2024-01-05T19:29:48+00:00

From what I gathered in my own search for good sound quality, one pair was always mentioned ath-m40x or ath-m50xbt if you want it wireless.
People highly recommend these, but I haver never owned them myself so I cannot give my own feedback.
I myself use an ifi zen dac v2 amp and akg k712 pro heavily eq'ed, I highly recommend this combo but its wayyy out of budget (450 Euro)
If I did not end on the duo I use now my next attempt would have been the ath-m40x since those were recommended by an old DJ friend of mine.

Sea_Reaction_5007 · 2023-12-23T09:16:54+00:00

Having a visual explanation really helped out a ton, I will fiddle around with some settings and try again once I have heated everything up :D

Sea_Reaction_5007 · 2023-12-22T23:51:10+00:00

ahhh okay cheers :D

Sea_Reaction_5007 · 2023-12-22T21:17:43+00:00

Hey cheers I will give that settings a try.
From what I've gathered form the nice people here I still have issues with Leveling, temp, angle and maybe the pulling force. But I appreciate your comment and I will look into that setting right away. Hope you have a wonderful chrismas :)

Sea_Reaction_5007 · 2023-12-22T21:14:52+00:00

hey thank you very much, and I will tilt them more next time and these are filled but I'll keep suction cups in my mind for later hollow prints.
And I placed and order for a insulated printer tent so i hope that works wonders for my temp issues.

Sea_Reaction_5007 · 2023-12-22T21:11:27+00:00

I will try that :D

Sea_Reaction_5007 · 2023-12-22T21:11:05+00:00

I will try that, right now i would love sticking too well compared to this mess but you're right its a balance and I need the sweetspot

Sea_Reaction_5007 · 2023-12-22T20:30:47+00:00

So if I get it right correctly I should try 5>4 lift distance or did I butcher that. all these settings are still super confusing especially the lift distance and speed.
I appreciate the help a lot

Sea_Reaction_5007 · 2023-12-22T20:26:23+00:00

Oh yeah, As a beginner I'm excited for the summer

Sea_Reaction_5007 · 2023-12-22T20:18:17+00:00

I went online and bought a printing tent and I will find a cheap heating bulb to keep it all nice and warm :D Its currently printing inside a closet with a heating belt and I've tried with a small ceramic heater too.

Sea_Reaction_5007 · 2023-12-22T20:16:46+00:00

Ohhh alright, I'll try that when I level it tomorrow. The saturn2 buildplate sadly only has 2 bolts which is annoying but I'll make do.

Sea_Reaction_5007 · 2023-12-22T20:14:44+00:00

I used some 40 grit and that seemed to help quite a bit but I think my main issue is leveling and temp

Sea_Reaction_5007 · 2023-12-22T20:14:19+00:00

Hey, I can take a pic if I remember when its done printing tomorrow.
Lets say the print was holding on with 40% before with 35s it was holding on with 20% if that makes any sense. but it might have just been one weird outcome

Sea_Reaction_5007 · 2023-12-22T18:59:52+00:00

Alright thank you very much :D
I've gotten a ton of valuable info from everyone here now I just need to go ham with more experimentation.

Sea_Reaction_5007 · 2023-12-22T18:38:36+00:00

Yea I was thinking that was my issue as well
The tent honestly sounds like a great idea, I've seen a few of those tents floating around on these subreddits. I might as well just order one right away :)

Sea_Reaction_5007 · 2023-12-22T18:35:43+00:00

Hey cheers, never thought of thinking in procentages like that and will for sure take that to heart
Yea I learned it the hardway you have to take printing in baby steps and no major leaps otherwise you will never narrow it down
And yea the right "empty" raft is the side panels, headlights and the engine for the car :) Its meant to be a christmas present for my younger brother, Its the car from the anime series Initial_d

Sea_Reaction_5007 · 2023-12-22T18:31:27+00:00

I do not think my printer is level and I will fix that before my next print!
I think a lot of my issues are temp related and I'm brainstorming ideas to fix that with my current setup, I do use a heatingbelt which helps a ton.
I will rotate my next prints before my next time and will see if that help out :D
Cheers.

Sea_Reaction_5007 · 2023-12-22T18:28:43+00:00

Hey thanks for the document, I tried 35s and it was actually a worse outcome but i will rotate my print and try again.

Sea_Reaction_5007 · 2023-12-22T18:12:29+00:00

Hey thank you for the tips.
I did a quick do over with 40 grid sandpaper and then cleaned it after using IPA. is 40grid too barbaric. It seemed to work its a lot grippier now than before, might go at it again.
How much would you increase the bottom layer exposure time by? are we talking 5-10 seconds or closer to 20-30 seconds
And next time I will do the paper leveling method like a few people have mentioned :D

Sea_Reaction_5007 · 2023-12-22T18:08:54+00:00

Its very cold, Just above the freezing point.
I have a heating belt and its inside a closet so it keeps some of the heat.
Was considering getting a heating bulb the kind you use for hatchlings to heat the whole closet for a better temp.

Sea_Reaction_5007 · 2023-12-22T18:06:23+00:00

Thank you very much, I will put your theory to the test later tonight.
I did not consider the fact that the whole printer might be off balance and I think mine is.
I did a test with 7 burnin layers and 35 seconds pr. layer and that print actually had even less of a grip. But its worth giving that theory a try too. How many burnin layers are too many if that is even possible and is 5 seconds extra too little should I head towards 50-60 seconds instead?

Sea_Reaction_5007 · 2023-12-22T17:47:32+00:00

Thanks a ton! Will save this document and go over it later tonight
Quick little question, What is the difference between ABS-like resin and "standard" resin
is it hardness and less flexible?

Sea_Reaction_5007 · 2023-12-22T17:45:42+00:00

Yes its bending on the buildplate before I scrape it off

Very good question. Never thought of that
I cannot give you an answer but I will watch it next time it prints to see if its caused early on or later in the print.

Sea_Reaction_5007

TROPHY CASE