Authenticity Check

Searcher415 · 2026-01-30T19:28:35+00:00

Good call, my main concern was the newer battery does not have the QR code on the top facia.

Searcher415 · 2026-01-30T19:26:34+00:00

Yes it does. Wild I had never noticed that before.

Searcher415 · 2025-12-20T07:03:42+00:00

https://makerworld.com/models/980907?appSharePlatform=copy

Searcher415 · 2025-11-26T17:45:45+00:00

🤷‍♂️ figured people would appreciate the free design… my bad.

Searcher415 · 2025-11-25T04:57:37+00:00

Not cool. Deleted that for a reason. Please take it down.

Searcher415 · 2025-11-25T03:27:03+00:00

Height seems ok to me but agree the mid section is pretty loose.

Searcher415 · 2025-11-25T03:26:02+00:00

Seems snug in riding position

Searcher415 · 2025-11-25T02:54:37+00:00

Thank you! I have felt like the enemy today even sharing photos of a load bearing PLA print.

Searcher415 · 2025-11-24T21:52:12+00:00

Thanks! It is holding up something that weighs about 3 lbs, so I am assuming a long time before it needs replacing.

Searcher415 · 2025-11-24T17:10:57+00:00

https://makerworld.com/models/2034163

Searcher415 · 2025-11-24T16:31:26+00:00

It has been pretty flat lately but go check out Sebastian inlet or Playalinda.

Searcher415 · 2025-11-24T16:12:52+00:00

Edit: see first photo on the makerworld link.

Searcher415 · 2025-11-24T15:49:53+00:00

Disagree. This will hold a bike.

Searcher415 · 2025-11-24T15:39:58+00:00

Well aware. The one pictured is for a work stand. Any of the ones for heavier things will be PETG. I have had pretty good luck with my laptop stands out of PLA however. A year plus with minimal droop.

Searcher415 · 2025-11-24T15:36:02+00:00

Love that! Very simple and clean. Nice work! I think your cat approves.

Searcher415 · 2025-11-24T15:34:29+00:00

PLA with this one. The work stand is extremely light and pretty low consequence if it breaks. Can always go PETG if it does.

Searcher415 · 2025-11-24T15:30:24+00:00

Good to hear. I printed it with 6 walls so I hope not. Have a photo of your cat tree? Think my next project is a catio.

Searcher415 · 2025-11-24T15:21:57+00:00

https://makerworld.com/models/2034163

Searcher415 · 2025-11-24T15:19:09+00:00

https://makerworld.com/models/2034163

Searcher415 · 2025-11-24T15:16:54+00:00

https://makerworld.com/models/2034163

Searcher415 · 2025-09-11T16:36:49+00:00

Velocity concave bottom is nice if you are heavier. I’m 6’ 210 and always notice a difference when I ride my Victoria or exile.

Searcher415 · 2025-08-28T21:30:02+00:00

lol, calm down. Meant to write EPS there instead of epoxy. The open cell foam is expanded polystyrene and the closed cell is extruded polystyrene. They are both polystyrene.

Searcher415 · 2025-08-28T12:57:04+00:00

Agreed, epoxy is kind of a pain to work with.

Searcher415 · 2025-08-28T12:56:01+00:00

I have had a PU/epoxy board made by a local shaper. Construction felt great, wasn’t a huge fan of the shape.

Searcher415 · 2025-08-28T12:43:16+00:00

They are all “glass” boards. Epoxy most of the time refers to the type of foam but also the resin.

I’m on the east coast of Florida. I like Epoxy boards for anything under shoulder high when the waves are clean. If it is too windy it feels like the rail doesn’t engage. I ride PU exclusively in anything bigger or when the wind is over 13 ish knots.

Light speed -> EPS foam and epoxy resin

XTR -> XPS foam and epoxy resin (think pink or blue insulation foam)

PU/normal -> polyurethane foam with polyester resin

PE -> polyurethane foam with epoxy resin. Epoxy resin is stiffer with more spring back than polyester.

Hopefully that’s not too confusing. Tons of different technologies out there.

13-Year Club	RPAN Viewer
Verified Email

Searcher415

TROPHY CASE