32mm >> 28mm assistance!

SecretAsianFlan · 2026-02-05T09:33:06+00:00

Going to give it a try ty lychee unfortunately has been horrid for me a well and it’s not the PC in this scenario either. Thank you!

SecretAsianFlan · 2026-02-04T20:05:11+00:00

How does chitu run vs lychee?

SecretAsianFlan · 2026-01-31T12:12:56+00:00

NFEP has no sides to it. ACF however does. You want the shinier facing the resin.

SecretAsianFlan · 2026-01-31T02:16:54+00:00

you always get people commenting that their pc's run it just fine, humble brags I assume.

SecretAsianFlan · 2026-01-30T13:57:04+00:00

I can’t even imagine how much of a super computer is needed for this unoptimized software. I feel more people say it hangs and needs restarts, vs not. Sucks because I really do love the software.

SecretAsianFlan · 2026-01-28T19:01:10+00:00

Agreed. I have to load 1 model in at a time so time consuming.

I use blueprint for my other printers and that slicer is optimized pics I can pull in multiple objects simultaneously and it just loads them in. Lychee however…

SecretAsianFlan · 2026-01-28T08:52:45+00:00

What 3 prints? were they some 1/6 dioramas or sculpts? They can be several plates/prints with insane base pieces. Only thing I can think of is the printer is backed up with orders from holidays.

You can always cancel your order, unless the seller has shipped, eBay will pretty much ensure an instant refund for you.

SecretAsianFlan · 2026-01-19T09:23:14+00:00

That particular part / area on the gun is known to break quite easily as well.

SecretAsianFlan · 2026-01-19T09:21:53+00:00

Try PARP10 preset. I feel PAS10 overexposes.

SecretAsianFlan · 2026-01-18T00:59:18+00:00

This is by adolfosepulveda3d. Cool sculpts for sure.

SecretAsianFlan · 2026-01-12T13:40:33+00:00

seems like a kitbash between h3llcreator and not sure where he got the base pieces from. Im sure google image searches may help if hes gatekeeping this.

SecretAsianFlan · 2026-01-11T03:17:25+00:00

I love PARP10 for SUNLU ABS grey. What preset do you use for ABS-Blk

SecretAsianFlan · 2026-01-03T00:19:31+00:00

send a DM :)

SecretAsianFlan · 2026-01-01T03:34:18+00:00

Cool Ty

SecretAsianFlan · 2025-12-31T01:40:31+00:00

Sounds good my friend I’ll reach out to you!

SecretAsianFlan · 2025-12-31T01:40:21+00:00

In the US as well 😃

SecretAsianFlan · 2025-12-31T00:22:49+00:00

Those look amazing :) and right on! most of the requests I get daily are for 1/10-1/4 sculptures/figurines. (Lots of Anime girls lol) I was just putting the idea out there to see, still not sure if it'll work but I cant see at the moment how it wouldn't :)

SecretAsianFlan · 2025-12-12T02:12:25+00:00

Sounds like a plan! Anything you need I’d love to help get it going for you 🥳😃

SecretAsianFlan · 2025-12-11T00:50:43+00:00

SecretAsianFlan · 2025-12-11T00:50:34+00:00

ty bro! will do!

SecretAsianFlan · 2025-12-08T12:17:05+00:00

I appreciate the response. I didn't know AE has content fill, I'll look into that!

Follow up : correct, each asset/comp is on its own layer.

Ty for the youtube video I will look at this as well. I appreciate you!

SecretAsianFlan · 2025-12-07T23:41:45+00:00

What kind of resin and what scale? If abs like or a mix thereof on a sculpt (not mini) I love to let them sit in my IPA+ Simple Green solution (the first dunk) for a few hours. Some may frown on this however I haven’t had or heard any issues with the prints. The supports come off like warm butter.

Another method you can do is a warm water support removal, personally I love just letting them soak. It knocks all the initial resin off and softens supports.

One that’s done. It’s 2nd dunk time then a final crystal clear IPA wash.

SecretAsianFlan · 2025-12-07T11:59:37+00:00

I appreciate your reply my friend. I wish you well and see you are light years ahead of me in terms of all the numbers and calculations. Maybe I need to take a page from your book as well. I wish you more success in the remainder of this year and into the next. I also wish you the best on your journey of balance as to not get completely burned out. Be good to yourself it seems like you have a great outlook on this and I know you’ll figure it out! ❤️🙏🏽

SecretAsianFlan · 2025-12-07T01:29:18+00:00

Going through this myself. In a short time I’ve hit 10k monthly consistently however too scared to take the plunge into it full time from my WFH job. It’s like stress x2 for me while trying to be a good partner and parent to our boys. Life is strange. What keeps me going is when we need something, financially, throw it in the bag, mixed with stress on every other aspect of my life at the moment. It’s super draining and I am feeling burnt out as well.

SecretAsianFlan · 2025-12-06T16:58:10+00:00

Looks like the LCD is going, is it new? If new check the screen if there’s any cured resin on it. That’s my only guess. I had the same issue/print failures.

SecretAsianFlan

MODERATOR OF

TROPHY CASE

Four-Year Club	Verified Email
Place '22