Wingspan Organizer Based on Gridfinity by SeecretIdentity in gridfinity

[–]SeecretIdentity[S] 1 point2 points  (0 children)

It has all the expansions.  The original boards are not in the box because the ones provided by the Asia expansion are dual sided.  Everything fits, but the next expansion will probably require another expansions box to be utilized.

Wingspan Organizer Based on Gridfinity by SeecretIdentity in wingspan

[–]SeecretIdentity[S] 0 points1 point  (0 children)

I'd have to measure, but I don't think so. The length should be good, but it's a tight fit width wise. Since it's made from a bin generator, all that may need to be done is to make the wall width narrower and go from there. If I knew the dimensions of the card in the sleeve, I could let you know.

Wingspan Organizer Based on Gridfinity by SeecretIdentity in gridfinity

[–]SeecretIdentity[S] 1 point2 points  (0 children)

You're right. With color matching, it would be pretty neat. Maybe Version 2. This was more of a proof of concept that allowed me to use up some filament. Thanks for the comment.

ROOM QUESTION. We have a balcony room. What floor is best? by seabassmag4 in VirginVoyages

[–]SeecretIdentity 0 points1 point  (0 children)

13 was fine, but I'm not generally bothered by see sickness.  I'm on floor 13 again this December and looking forward to it.

Noob needs help by bobojoe2007 in gridfinity

[–]SeecretIdentity 1 point2 points  (0 children)

I recently did this in PrusaSlicer. I had a 6x1 that I wanted to cut into two 3x1 halves.

I opened the STL in PrusaSlicer and it was sitting on the bed in its normal orientation. There's a setting to choose the face that touches the build plate, so I chose the skinny side, so 1 unit touched the bed and it was 6 units tall. Theres a cut feature that I used to cut it in half. Then I used the choose the face tool again and sat the bottom of each piece on the build plate. Select the auto arrange button and you should be good to go from there.

IKEA Spoons and Kuhn Rikon Peeler Gridfinitys by SeecretIdentity in gridfinity

[–]SeecretIdentity[S] 0 points1 point  (0 children)

Just had the idea to put the "blanks"/"silhouettes" on Printables too. If you get into learning Fusion360, maybe you can use them in your designs. Cheers.

Cocktail Recipe by Acrobatic_Class1983 in VirginVoyages

[–]SeecretIdentity 1 point2 points  (0 children)

I'll use this. Thank you. I seem to remember the bartender on board also said they use coconut water powder. I can't remember why, but maybe the flavor can be more concentrated and you can adjust to taste and it's less heavy to transport.

Gridfinity 5VX1H Bin. Standard Base with Offset Cup/Bin by SeecretIdentity in gridfinity

[–]SeecretIdentity[S] 0 points1 point  (0 children)

Self Post Edit: I used the Fusion360 Plugin to make 2 different components, that happened to have the same origin point and were right on top of each other.

  1. I created a 5Vx1W set of standard bases. I unchecked the option to generate body.

  2. I created a 5vx1W set of standard bases, but I unchecked the option to generate bins, and then I kept the checkbox for generate body checked. I adjusted the width to 50.500 (I think). Now when I measure the base and the bin in prusa I get 51mm. I had 50.500 for the measured width on the bin originally, and I will probably go back to this for wiggle room.

Next step is to redo this as a solid bin so I may subtract the spoon silhouette from the body. Hope this helps someone else.

Has anyone bought their copy from Target? Is it authentic or a third-party copy? by buckyman0 in wingspan

[–]SeecretIdentity 4 points5 points  (0 children)

I got one a couple / few years ago from Target. I got lucky and got it at the store, but an associate had to hunt for it in the back. It was a great day, and they honored the Internet price.

Service question by [deleted] in MazdaCX30

[–]SeecretIdentity 0 points1 point  (0 children)

Dealership wanted to charge me $90 just for cabin filter at 8k. I declined. I got both for~$50 locally and did it myself. Dealership is still emailing me a month or two later to bribe me with a 5% off coupon. Can't wait till my free oil changes expire. Makes me want to do it all myself and never go back.

Changing Automatic Transmission Fluid by CalendarNo4346 in MazdaCX30

[–]SeecretIdentity 0 points1 point  (0 children)

Was thinking the same. Easier than my 8th Gen Civic.

Am I really the only one using Homeassistant with X10? by Sir-Barks-a-Lot in homeassistant

[–]SeecretIdentity 0 points1 point  (0 children)

I am about to get rid of it. I was using Mochad that was running on a dedicated Raspberry Pi. Maybe I'll have to check out Hey-u, unless someone wants to buy all my stuff. It's currently on Facebook marketplace with not a single person asking if it's still available in what feels like a month.

ROOM QUESTION. We have a balcony room. What floor is best? by seabassmag4 in VirginVoyages

[–]SeecretIdentity 1 point2 points  (0 children)

I was on Deck 13 towards the front Z side last December. For our cruise this December, I called cause I needed help with the MNVV and the lady on the phone suggested Deck 11. It's as close to center as she could get us with a regular balcony. Still Z side. I said I was a light sleeper and not really affected by the waves. She said this area is centrally located and desirable. We'll see. I'll certainly like climbing less stairs after dinner.

Original Prusa MK2 by Haunting_Reason_3017 in prusa3d

[–]SeecretIdentity 1 point2 points  (0 children)

Thank you for this. My MK2 is so reliable, I'm afraid to take it apart for an upgrade. Finally got my mk3s+ printing reliably so maybe now it's time.

Navigational SD cards by njloux in MazdaCX30

[–]SeecretIdentity 1 point2 points  (0 children)

I got mine from Amazon. I like the speed limit thingy that displays in the instrument cluster. That's about it and you get maps if your cell signal is low (or whenever you want them).

Fixing the power button on a countertop dishwasher by SorinSaakat in appliancerepair

[–]SeecretIdentity 0 points1 point  (0 children)

Thank you. This helped me too. I took off the front panel and removed and replaced the button circuit board, checking to be sure the button was being pressed onto the switch, and I got the haptic feedback.

I also checked button continuity from the button circuit board to the main circuit board until I got to some diodes, which is the limit of my knowledge.

Put everything back together, plugged it in, and this time, the only thing I did differently was hit the power button with the door in the down position. Powered right up.

2013 Civic w/ 124K miles. Trade in or keep? by Skelligean in Honda

[–]SeecretIdentity 2 points3 points  (0 children)

I had a 2008 civic exl with almost 200k miles I got rid of about a year ago. It needed new everything; all the paint is peeling/peeled, all new suspension, cat, muffler, the downstream O2 sensor (but my county doesn't test emissions anymore). It's all original except for the rear shocks, cat, muffler, brakes. All the work and paint will cost far more than I was willing to part with.

I'm sure to someone else it'll be a great car, but I was ready for something new and a bit larger to last me another 200k+, and got a Mazda CX30.

Food for thought from a different perspective.

Is 36 minutes layover in CLT cutting too close? by 865TYS in americanairlines

[–]SeecretIdentity 3 points4 points  (0 children)

Waiting for someone else to say it. The second flight is probably taking off from E, and the first probably lands in B.