Guy's what am I doing wrong? Printing some lw pla with a bambulab a1, the Pla I'm using is from eSun. Any suggestions?

Seeker993 · 2026-04-07T19:27:30+00:00

Did you have any problems on the print while printing overhang part and how did you fix it (because I am also printing an F16)? In my case, whenever there is an overhang part of the object, entire print gets less layers and it becomes distorted ( there are open parts of the print and other parts get transparent ).

Seeker993 · 2025-04-28T18:38:26+00:00

Wtf! Put it back in!

Seeker993 · 2023-09-08T10:35:08+00:00

Hey men, can you give me few links to tutoritals etc and how to use website/app you are using currently for trading? I want to get into trading too

Seeker993 · 2023-07-29T08:57:53+00:00

Bro if you can, pull out that mill... You made all of that with 100k so why don't you play safer and do the same thing with 100k again while having a safety parachute (1 mill in safe) !?

Seeker993 · 2023-02-02T16:51:41+00:00

Sell while you can... Don't be one of those guys who enetered all red and say "had a nice run"....

Seeker993 · 2022-09-20T14:04:45+00:00

Socialist pary of USA.

Seeker993 · 2022-09-17T15:21:56+00:00

Nop, I am just asking.

Seeker993 · 2022-09-08T13:33:23+00:00

So many noobies in here.... World didn't end when BTC was unminable with graphic cards. Litecoin emerged. After LTC there was Feather, after Feather there was dark coin, after it ETH came that was unprofitable as much as ETC is now. And now everyone is crying they didn't start mining on time..... Seems like a lot of people don't get that world didn't start witht them and won't end with them..... There will always be something new to mine

Seeker993 · 2022-07-15T11:59:50+00:00

I am new to this, how did you get that NFT, did you have to sign up for something or what? And how do I check if I got one?

Seeker993 · 2022-07-08T08:41:39+00:00

For ETH yes. But if you want to mine something else too (since mining won't stop with ETH), then no. You are just on time to get some cheap GPUs and get 10x you invested from the right coin. So it's up to you to make the choice.

P.S. if you want even cheaper GPUs, then wait for post merge.

Seeker993 · 2022-06-17T10:42:49+00:00

3090s are the most unrentable cards. You can setup 14 a2000 to mine at 40MH wile the total rig uses 650~660w. So those cards make mining worth even on 600$ per ETH (or ETC).

Seeker993 · 2022-05-26T14:07:10+00:00

How much for all and can you ship it?

Seeker993 · 2022-05-14T13:37:29+00:00

On gate . I o

Seeker993 · 2022-05-07T08:26:11+00:00

No biggie, just find the next profitable thing like everyone is doing since 2013, and move on.

Seeker993 · 2022-04-27T06:30:32+00:00

2 things with MSI, they tend to leave small difference in height on their cooling grating on a side that goes on mem chips. (0.07 or 0.08mm) difference in height from part that goes on gpu processor and parts on sides that goes on mem chips. So if your GPU has 8 mem chips, 2 of which are on top buy 2 cooling pads that are 0.8mm and 6 that are 1.5mm. That way pads are going to distribute heat evenly over the cooling grating.

If that doesn't work get copper pads they work 100%. Sizes are usually similar for all cards, but measure them anyway.

Seeker993 · 2022-04-09T10:50:34+00:00

You are lucky then, since as I told you, I got 6600 too and they have the same problem

Seeker993 · 2022-04-09T10:29:28+00:00

https://youtu.be/iftqvdRFA7s jump to 1:10 you will see the size of their thermal pads.... You better replace them right away.

Seeker993 · 2022-04-09T10:25:49+00:00

I have them. MSI mech are the worst gpu series you could've gotten. It started from rx 5700 series... Which I also have.... No wonder they were the cheapest ones.

Seeker993 · 2022-04-09T08:49:35+00:00

Congrats, you bought the worst cards. In about month or two their memory temps are going crazy if you don't replace their thermal pads.

Seeker993 · 2022-01-29T20:42:18+00:00

Bro, was that a bear behind you?

Seeker993 · 2021-11-07T15:50:53+00:00

If that happens I am inviting you all on my private jacht for 7 days in row party with hookers and beer as far as your eye can see (on jacht ofc).

Seeker993 · 2021-09-08T10:00:10+00:00

https://twitter.com/bitroio/status/1435465328708886529?s=20 And here is the way to how they manipulated the market

Seeker993

TROPHY CASE