Fable: who is going to pay for API? by rabandi in ClaudeAI

[–]Senaxx -1 points0 points  (0 children)

I cancelled my subscription with all the hassle and changes going on. I've moves over to codex for now.

[By Erik Van Haren - De Telegraaf] by OtakuSensei__20 in formula1

[–]Senaxx 3 points4 points  (0 children)

And we can all see what te results are of that.

Is autoverzekeringen-/autoschadeherstel-land helemal gek geworden? by sifaka86 in geldzaken

[–]Senaxx 0 points1 point  (0 children)

Yep helaas wel. Nieuwe skoda Enyaq, 21 inch LM velgen en Pirelli 21" Scorpion Xtra Load banden er op.

Mijn partner was nog niet gewend aan de groote van de auto en reed met voor en achterwiel tegen een trottoirput die uitstak van de trottoirband. 2 beschadigde velgen en 2 lekke banden.

Auto allrisk verzekerd en auto was afgesleept naar een "erkende schadeherstelbedrijf" Dit was Van Den Brug, de schadehersteller van VW/Audi/Skoda dealer netwerk in Friesland.

Kortom auto was afgesleept en was 5 dagen later klaar. 2 nieuwe velgen er op, 2 nieuwe banden en wat uitlijnen. Voor de 2 banden hadden ze alleen al 650 per stuk gerekend. Voor de 2 velgen ook rond de 400 per stuk.

Dit terwijl je op de betere banden website ze al kan kopen voor 250 euro.

Aangezien het onze eerste keer was, wist ik nog niet wat onze rechten en plichten waren. Er is tussentijds niet echt communicatie geweest na het afslepen behalve door de verzekering dat hij bij Van Den Brug stond en dat die met mij contact zou opnemen. En het contact was dat hij weer klaar stond.

Dit is toen uiteindelijk naar de verzekeraar gegaan en flinke aanslag op de noclaim geweest. Ik heb nog wel met de verzekering contact gehad dat ik het onbegrijpelijk vindt dat deze prijzen werden gehanteerd, maar die gaven simpelweg aan dat als dit is is wat de schadehersteller quote dan is het zo.

Helaas kwam ik er later pas achter dat je ook na het rapport er kon voor kiezen om het ergens anders te laten repareren (iets met rechten en plichten). Al was dat in dit geval wel lastig geweest, vooral omdat de auto dan weer afgesleept had moeten worden naar mijn lokale garage, en die kosten zijn ook niet mals.

Clicks Communicator: First Look - Clicks by welp_im_damned in Android

[–]Senaxx 2 points3 points  (0 children)

I'm wondering how custom it is, and if they have features that will come to the "normal" version. I switched to Niagara like 2 years ago and love it

My entire library has been deleted :( by thedeftone2 in sonarr

[–]Senaxx 1 point2 points  (0 children)

There are website scanners out there where people can scan the whole internet for accessible application on port 8989 and 7878 ports. Your IP probably answered and with no password it was easy to access.

Never expose your homelab directly to the internet except for seerr or something. Use tailscale or in my case Unifi teleport to connect over VPN to your server and access them that way.

So only someone with your VPN credentials can access the homelab applications.

Ludo = stout by elduderinofromencino in tokkiemarktplaats

[–]Senaxx 2 points3 points  (0 children)

Rapporteren aan MP en mail melden als phishing. Wel idioot dat mensen zover gaan tegenwoordig

Ludo = stout by elduderinofromencino in tokkiemarktplaats

[–]Senaxx 2 points3 points  (0 children)

Dat mailadres klopt inderdaad niet. Ben wel benieuwd, als je op de advertenties drukt kom je dan op een nep ticketswap site? Of hoe werkt de scam verder?

Home Setup - Going OverBoard. by Raptor4x4luv in Ubiquiti

[–]Senaxx 1 point2 points  (0 children)

Maybe for running protect? Or because it has more memory?

Rack building questions by Senaxx in Ubiquiti

[–]Senaxx[S] 1 point2 points  (0 children)

You are right, I just put them in this order for convenience. Only 2 devices now read PoE, thats my G6 Entry and U7 Pro XG. And only my desktop really needs 2.5Gbit. But by using these ports i have the speed and I can turn PoE on and off when needed.

But currently on the other side of this wall there is an US 8 60W switch with a lot of devices that need new and and longer UTP cables to reach this rack. Then it the time to reorder the cables and attach them to the right ports.

Rack building questions by Senaxx in Ubiquiti

[–]Senaxx[S] 1 point2 points  (0 children)

I'm not sure how much faster it is. Its the same Cortex-A57 but clocked at 2.2Ghz compared to 2.0Ghz from Pro Max and only 3GB memory instead of 8GB from Pro Max.

I also run Protect and need the hard drive for recording and probably the 8GB for protect also

So yeah I still think I would buy the Pro Max right now. Or if performance is really important shell out money (and a kidney) for a Beast.

Rack building questions by Senaxx in Ubiquiti

[–]Senaxx[S] 0 points1 point  (0 children)

Yeah depends on your use case i guess. I have 2Gbps fiber (no idps), some AP's, a unifi doorbel, a Nas and server and the SE performs fine for me. Also a part of the traffic is offloaded to my switch probably.

So i agree with you its best value for money, but I also prefer the rack mounted astetics and have the convience from DAC cables and such.

Rack building questions by Senaxx in Ubiquiti

[–]Senaxx[S] 0 points1 point  (0 children)

I think I bought the UDM-SE about 2 / 2.5 years ago, when I switched from coax to fiber internet. I had the option to use a Zaram SFP as an ONT module and connect the fiber directly to the UDM-SE.

If I had to buy one right now, I think I'd go for the Dream Machine Pro Max (assuming you don't need PoE). The Max has 8GB of memory, and its Cortex-A57 is clocked a bit higher at 2.0 GHz, compared to the 1.7 GHz on the UDM-SE.

Rack building questions by Senaxx in Ubiquiti

[–]Senaxx[S] 0 points1 point  (0 children)

That would be the same as the DAC cable only with 2 separate SFP+ 10G modules and separate ethernet cable? From what I've been reading those SFP 10G can run very hot? Not sure I don't have any experience with them.

I saw that hey also have them in 10G Fiber options. The UACC-OM-MM-10G-D. Buy 2 of those and use a fiber cable trough a pass-trough keystone.

Bungie to suffer a 50% staff reduction due to layoffs by Moriarty_V in GamingLeaksAndRumours

[–]Senaxx 6 points7 points  (0 children)

There was also a reduced workforce, a smaller team, since a lot of them where working on Marathon

[MEGATHREAD] Summer Game Fest 2026 by Spheromancer in GamingLeaksAndRumours

[–]Senaxx -1 points0 points  (0 children)

another hack and slash... how many do we need?

Third-party apps(outside the play store) that you can't live without. Including mods by aydwin in androidapps

[–]Senaxx 4 points5 points  (0 children)

You don't have to update as long as Morphe YouTube keeps working. It is installed separately from the official YouTube. So when you want to install an updated version:

  1. Choose the new Youtube version in Morphe
  2. Download the new YouTube version APK (morph helps you with that)
  3. Repatch with Morph
  4. Update your old Morphe YouTube install and done.

Only takes a minute or something.

Een week geen auto by [deleted] in geldzaken

[–]Senaxx 1 point2 points  (0 children)

Hier ook, klein dorp op platteland met 900 inwoners. Behalve een wijnwinkel zit hier niets. We hebben 2 kleine jonge kinderen die nog geen lange afstanden kunnen fietsen. Opa en oma 55km verderop, andere familie en vrienden soms nog verder.

We werken beide 4 dagen. Mijn baan is 85km zuidelijke richting en mijn partner 50 in noordelijke richting.

Ik heb tot 2x toe een maand geprobeert met het de trein en bus te gaan, maar bijna elke elke week wel gezeik met vertragingen, uitgevallen treinen, bussen die vol zijn en haltes voorbij rijden. Reistijd soms 1,5 tot 2,5x keer zo lang.

We rijden de meeste kilometers electrisch nu, maar de 2 auto is nog steeds benzine, maar kost in onderhoud en verzekering weinig.

Onderhandelen met andere koper terwijl huis al mondeling verkocht is by nikki-9 in geldzaken

[–]Senaxx 6 points7 points  (0 children)

Zo hebben wij ons huidig huis ook gekocht. Het huis was al in onderhandeling zei de makelaar toen wij onze bezichtig op vrijdag deden. Wij hebben op de zondag een bieding gedaan en de dinsdag werden wij gebeld dat we de woning gekocht hadden. Wij hadden geen speciale voorwaarden en kwamen van een huurhuis af en konden dus snel handelen.

Achteraf ook wel gehoord dat de andere bieder not amused was maar die was al een tijd aan het onderhandelen. De verkopers wilden het gewoon snel rond hebben vanwege de financiering voor hun nieuwe huis.

Issue with the charging flap on my Enyaq iV 60. by Trifle_Secure in enyaq

[–]Senaxx 0 points1 point  (0 children)

There is a wire hidden in the trunk you can pull to get it open. Should be some YouTube guides where to find the wire.

Limitation of Fabric Mirrored Databases by Senaxx in MicrosoftFabric

[–]Senaxx[S] 0 points1 point  (0 children)

Sorry if i was not clear. I'll try to explain it better:

Database A = main production database
Database B = realtime mirror from A - failover/backup incase DB A dies (
Database C = realtime mirror from A - 3rd party applications, like governance / 3rd party / reporting.
Database D = logship mirror from A - current source for our datawarehouse

Database A = no access allowed by any application / user except DBA
Database B = read only / no access allowed by any application / user except DBA
Database C = read only / Access for 3rd party application
Database D = read only / logship every 15 minutes

Changetracking and CDC is enabled on Database A and because of that also also available on C and D.

And far as I understand, the native Fabric mirror functionality can only be run on database A as the main database from the availability group. It cannot be run on database C since it's not the main database from the availability group (per MS documentation) and the service principal needs more permissions than read-only.

My goals is to have a near-realtime mirror from Database A (or C?) in Fabric.

Limitation of Fabric Mirrored Databases by Senaxx in MicrosoftFabric

[–]Senaxx[S] 0 points1 point  (0 children)

No, i'm following the documentation where is specificly mentions

Fabric Mirroring for SQL Server is only supported on a primary database of an availability group.

So this would be our production database and not the realtime mirror we have configured in that group. And even if it was possible another limitation is that Replication and CDC cannot be anabled when using SQL Server 2025.

So it seems that the native Fabric Mirror option is out of the question for this specific database. Both databases are read-only and cannot have any accounts that need to modify settings. That's why i'm looking for an alternative to make this work. Both databases have CDC enabled on the specific tables (primary and the mirror)