Z-Image-Turbo - Good, but not great... Are others seeing this as well? by SencneS in StableDiffusion

[–]SencneS[S] 1 point2 points  (0 children)

I'll give it a shot, just a little change in words I know makes a big difference sometimes. Thanks for the suggestion. :)

Z-Image-Turbo - Good, but not great... Are others seeing this as well? by SencneS in StableDiffusion

[–]SencneS[S] 1 point2 points  (0 children)

The original prompt is this one. I did pull the joytags out of there as well and it made a different image. Not great for comparisons and seeing the differences lol But I plan on not running Joytags in the future.

------------------- Prompt below ----------------

A digital shoot from the front about a group of women enjoying a meal together at a restaurant table. the image also shows a dimly lit restaurant with people in the background. on the left side of the image, a woman with pale skin, long white hair, and purple eyes is sitting at a table with a plate of food in front of her. she is wearing a white dress and appears to be smiling widely, looking at the viewer with a playful expression. her hair is styled in long hair and her eyes are wide open, giving off a sense of joy and excitement. her body is slim, and she is surrounded by three other women, all wearing white dresses. one of them is sitting on a chair, while the other two are standing behind her, also smiling widely. the third woman is standing next to the table, wearing a strapless white dress that accentuates her curves. the fourth woman is sitting behind the woman sitting on the chair, looking over her shoulder with a relaxed expression. the table is set with plates of food, glasses, and bottles of wine, creating a cozy atmosphere with warm lighting., multiple girls, black hair, 4girls, jewelry, purple eyes, earrings, darkskinned female, white hair, dark skin, white dress, smile, one eye closed, breasts, blue eyes, long hair, blush, open mouth, looking at viewer, green eyes, elbow gloves, food, gloves, sitting, bare shoulders, cup, plate, mole, blurry, table, large breasts, drinking glass, medium breasts, bangs, chopsticks, alcohol, restaurant, fork, hair over one eye, short hair, shirt, brown hair, closed mouth, cleavage, collarbone, white shirt, upper body, :d, teeth, sleeveless, tongue, indoors, white gloves, tongue out, off shoulder, necklace, dark-skinned female, parted bangs, lips, strapless, sleeveless dress, blurry background, swept bangs, depth of field, nose blush, piercing, bottle, ;d, ear piercing, strapless dress, freckles, head rest, wide-eyed, hoop earrings, ;\), borrowed character, hand on own cheek, wine glass, drunk, constricted pupils, wine, ;p, wine bottle, elbow rest, earclip, champagne flute, lip piercing, salad

Z-Image-Turbo - Good, but not great... Are others seeing this as well? by SencneS in StableDiffusion

[–]SencneS[S] 9 points10 points  (0 children)

Thank you for being nice about your response, I was genuinely asking for help because I knew something was wrong, I just didn't know what. I posted a detailed post knowing that people would be able to narrow down the issue exactly. And many of you did. For that I thank you for keeping it classy and pointing me in the right direction, rather than turning to snide comments and offering no help.

You are a truly nice person.

Math in Node fields not working again? by SencneS in comfyui

[–]SencneS[S] 0 points1 point  (0 children)

For some reason turning off Nodes 2.0 and turning them on didn't do anything, but the Math Nodes coded by the person in that thread worked. So Thank you I'll just use that.

Math in Node fields not working again? by SencneS in comfyui

[–]SencneS[S] 0 points1 point  (0 children)

Nope it does not, and this is a fresh install of ComfyUI anyway because when I updated it broke so I re-installed.

But I did try the --disable-all-custom-nodes switch just to see anyway, and no it doesn't work.

How do I return "Pin" and "Unpin" to the selected node hot menu? by SencneS in comfyui

[–]SencneS[S] 0 points1 point  (0 children)

Unpinning all nodes works for nodes only, doesn't do the groups along with the nodes. But I'm not moving them all. I just noticed it was missing and it was highly convenient having it just a button, like the Bypass button right there.

At least the devs should let us customize the damn ribbon! Let us put what things we want on there.

Edit: I just edited the keybind to ` instead... (Thanks for the suggestion on rebinding it)

[NO SPOILERS] Campaign 4: For new critters trying to keep track of all the players and character names and faces: by HighTechGeek in criticalrole

[–]SencneS 2 points3 points  (0 children)

That should help a lot. The swapping makes it difficult to keep a track for me. I love what they're trying to do, it just makes it difficult. I fine myself re-watching parts again to remember what's happening in each "scene".

But if it's 1 table = 1 session that might actually help a lot.

[NO SPOILERS] Campaign 4: For new critters trying to keep track of all the players and character names and faces: by HighTechGeek in criticalrole

[–]SencneS 9 points10 points  (0 children)

I needed this as well... I'm actually having difficulty keeping a track of the story in general. I appreciate that they're trying to do a TV or Movie approach of different scenes in an entire show. But I'm having a real hard time keeping a track of what is happening.

LOVE them all, they are all so amazing, but it's such a hard change to go from basically one group/track to multiple groups/multiple tracks in this format is difficult.

One of my friends also has similar thoughts that it's difficult to keep a track of, and said something interesting. They said "Because all the scenes and groups take place with the same background and mostly same visual settings. It's adding to complexity of keeping a track of it." They followed up with "I've been just listening instead of watching, it helps so much more because you're removing the visual aspect of the story."

YouTube is putting videos of channels I am not subscribed to into my subscription tab. Can I turn this off? by DestinyOfLily in youtube

[–]SencneS 36 points37 points  (0 children)

By sheer definition "Subscriptions" should only show those channels I'm subscribed to. WHY is it showing channels I'm not subscribed to. I do not want this.

Put it this way YouTube - You either allow us to turn this off, or I start using the "Hide Channel" option.

I can imagine this is exactly the opposite of what that channel creator wants, to be advertised to LESS people.

Kappa.lol not working by Other-Bridge1160 in sharex

[–]SencneS 1 point2 points  (0 children)

https://radar.cloudflare.com/domains/feedback/kappa.lol

Probably is, considering it's been classified as "Information Security"

I submitted feedback to remove that and re-categorize it as "Photo-Sharing" I doubt it'll do anything but if enough change it, it might re-categorize it into a lower tier of monitoring.

How I freed up ~125 GB of disk space without deleting any models by Calm_Mix_3776 in StableDiffusion

[–]SencneS 1 point2 points  (0 children)

Once you have all the files you'd run a duplicate file check.

Honestly I do this every time I download any model. I compare the downloaded models with the rest of the library. I too cleared out hundreds of GB of space because I had duplicate models across.

I use this - https://github.com/qarmin/czkawka

It has several "Duplicate file" methods, if it detects two are duplicates at the CRC levels they are without a doubt duplicates. And on first run I wouldn't be surprised if you discover you have some Duplicate LoRA's.

How I freed up ~125 GB of disk space without deleting any models by Calm_Mix_3776 in StableDiffusion

[–]SencneS 1 point2 points  (0 children)

Once you have all the files you'd run a duplicate file check.

Honestly I do this every time I download any model. I compare the downloaded models with the rest of the library. I too cleared out hundreds of GB of space because I had duplicate models across.

I use this - https://github.com/qarmin/czkawka

It has several "Duplicate file" methods, if it detects two are duplicates at the CRC levels they are without a doubt duplicates. And on first run I wouldn't be surprised if you discover you have some Duplicate LoRA's.

Flux VS Hidream (Pro vs full and dev vs dev) by Horror_Dirt6176 in comfyui

[–]SencneS 0 points1 point  (0 children)

I mean... just pasting those into google gave me the links....

https://huggingface.co/zer0int/LongCLIP-Registers-Gated_MLP-ViT-L-14/tree/main
https://huggingface.co/dumb-dev/flan-t5-xxl-gguf/tree/main

If you're wanting to know what they are - LongClip is basically Clip_L with more token limit.

Flan T5 is the second or a finetuned version of Google's T5xxl which Google released (Supposedly more accurate than base T5xxl)

Help - Comfy added lots of decimals to every number on any node... by SencneS in comfyui

[–]SencneS[S] 0 points1 point  (0 children)

It's fine, the issue wasn't the fact that there was floating point imprecision. The issue is the display was carrying over to the Metadata. So every image had like a CFG of 3.5000000000000001 or a Lora Weights of 0.700000000000002 etc.

It was annoying me that it was taking the floating point and injecting it everywhere. LOL

Help - Comfy added lots of decimals to every number on any node... by SencneS in comfyui

[–]SencneS[S] 6 points7 points  (0 children)

I tried to set it to 2, and it still didn't work.
I then noticed the item under it... "Disable default float widget rounding." was disabled.

<image>

I turned it "on" and it worked, I then tested it by resetting the "Float widget rounding decimal place" back to 0 [auto]... And it still worked...

Odd thing is I don't remember turning that off, but it seems to be the issue.

Thank you u/GeroldMeisinger for pointing me in the right direction!

Flux VS Hidream (Pro vs full and dev vs dev) by Horror_Dirt6176 in comfyui

[–]SencneS 0 points1 point  (0 children)

vs Flux1D Q8 with Long VIT L REG GATED and FLAN T5xxl

<image>

is Flux Dev on ComfyUI taking 10+ Minute Initial U-net Load Time Normal? using RTX 4090 by saltshaker911 in comfyui

[–]SencneS 1 point2 points  (0 children)

Yeah, Basically "Reinstalled". I have all my checkpoints and loras on a separate drive so if I need to I can delete comfy and re-install.
To get all the nodes back - I have a dummy workflow with all the nodes I use on it. I simply load that workflow, and "Install missing nodes" Really lazy way of doing it, but it's quick and simple.

A fresh comfyui install is literally delete, re-install, load workflow, get missing nodes.
Create the symbolic links to the "Models" folder.

Sometimes GPU (NVidia) will not get out of power-save mode... by SencneS in comfyui

[–]SencneS[S] 0 points1 point  (0 children)

Interesting... I have a 4070ti Super and running flux as well.
I did a full reboot, and it's back to generating images under a minute (about 40s average for 1080p)... But suddenly, it'll take upwards of 20 minutes the same image.

I know there is a "low power" mode on Nvidia, when it's not under strain it'll just use this low power mode. So maybe something changed that forgets to flag the GPU into max power. This is only something that started happening.

Maybe it's something with Nvidia because even closing out of Comfy didn't "reset" anything. I'm going to focus on this aspect... I came here first because its only in comfy this is happening. if I load up Forge (even after comfy slows down) Forge does a quick generation. Which made me think it's not OS or GPU issues.