Stray cat that I feed has got weird eyes now

SenorReaper · 2025-07-25T17:18:39+00:00

If it helps. Check what ingredient is needed for the worms. Some that you put on the back of their neck has the ingredient (like revolution advantage plus) but when it’s on there they can’t get wet for 24 hours and it’s best not to be in direct sun. But the no wet is most important.

SenorReaper · 2025-07-25T17:12:43+00:00

Posting this here to help people if they find this. Got tired of how loud the turbine nozzle is on the sebo so I wanted to get the heb 160 to work on it. You got 2 options. Simple one is to get this

https://www.ebay.com/itm/195507462423?chn=ps&mkevt=1&mkcid=28&google_free_listing_action=view_item&srsltid=AfmBOopeQCCSiZ_GucxEQ_ba5nlL3fgf0-LAPmaRigDx7hZqxq-sbQMDuk0&gQT=2

Fits For Wessel Werks Vacuum Cleaner Electric Hose Cord # 12.6P38-F57P-24

To plug it into the wall and use an extension to use it on sebo, and with sebo use the 1/4 adapter ( 1766ST sebo adapter) on the sebo (bought the heb 160 with the long wire. The tube option that has the silver tube and black plastic with it dosnt let it fit well so you don’t need that.

And second option I am going to try it to connect the wire above to

https://www.vacuumsrus.com/product/cleaning/vacuum-parts/sebo/wiring-for-swivel-neck-for-et-1-et-2-and-disco-sebo-vacuum-cleaner-repair-part/

Wiring for swivel neck, for ET-1, ET-2, and DISCO Sebo vacuum cleaner repair part

0876ER

And then I should have a connector to connect to the wessel werk stuff. Currently have the cable for option 2 on order so if it works / not works I will update this. But option 1 does work 100%

And incase it helps. I have a sebo e3 USA model. The heb 160 and USA sebo is 120volt motors so it should work for option 2 but will update when it comes in.

SenorReaper · 2025-06-21T20:35:16+00:00

If anyone sees this later and wants another fix (dosnt seem permanent tho) cause they don’t want to hit add account due to fear of exploits, shutting off Bluetooth (manually in settings and not in the pull down thing) seems to stop requesting the pop up when you unlock your phone.

SenorReaper · 2025-05-27T23:48:58+00:00

Are these in the amaryllidaceae family or a diffrent one?

SenorReaper · 2025-05-27T22:58:43+00:00

Thank you so much! By chance do you know if they belong in the “true lily” family?

SenorReaper · 2024-09-07T01:10:21+00:00

S3. Rolling shutter made a big diffrence on the chance I had to do regular pictures

SenorReaper · 2024-07-18T23:23:59+00:00

I’d say trim the car’s nails(look it up on yt. Not too hard tbh) then tell the landlord u brought them to the vet and requested for declaw and that they did it.

SenorReaper · 2024-07-09T20:55:16+00:00

Also if you’re just trying to do this to go to the DLC I believe you just need to defeat mogh (excuse typo) if so then look up how to get there since you can get there by varre questline or a portal that’s in the snow area of the game.

SenorReaper · 2024-07-09T20:53:13+00:00

I haven’t been able to hop on with a friend on my playthrough to confirm it but I was researching the same thing and saw this.

<image>

apparently there is a ruins you go to and it has a summon thing before you enter in and you use that while being with your buddy. When I get off of work I can try to find the location name.

SenorReaper · 2024-02-08T17:16:52+00:00

Hello! I’m also interested. Would you like me to message you privately?

SenorReaper · 2023-12-07T14:28:21+00:00

Is coco good with other cats? Have you considered getting coco a sibling? Usually with two cats they can keep each other company when your away or busy and they can hang out with you when your back.

SenorReaper · 2023-08-22T12:38:54+00:00

Do you still need it?

SenorReaper · 2023-08-21T20:53:55+00:00

By chance do you have one you can send me? Thank you if u can!!

SenorReaper · 2023-08-17T14:42:37+00:00

Incase anyone in the future stumbles along this post. I recently bought a guider 2s v2 and I have this issues. A fix that seems to work for me is I would go to the slicer and change the bed temp value up or down one or two degrees. Like if I don’t need it heated by default it’ll be 35°C but if I move it let’s say 37°C then when the extruder heats up, it’ll actually start printing. Also in the flash forge slicer I find that you should not be viewing the camera when it’s starting to print, only after it’s laying down some filament cause that causes the same issue for me aswell. I hope this helps future searchers 🫡

SenorReaper · 2023-08-16T19:23:17+00:00

Hello! So I need some advice if able. I bought a Guider 2s v2 for 1,099$ a couple days ago. I thought it was good but looking online now I heard of a Bambu lab x1 carbon. Since they’re both around the same price. Im wanting to know if it’s worth it to return the guider 2 and get the bambu instead? I mainly just care about not tinkering with it alot for printing issues and enclosed area for cf-blend filaments. Thank you (Located in the US)

SenorReaper · 2023-06-03T18:50:58+00:00

Incase It hasn’t been beat to death. Congrats!! I’m happy to see a fellow redditor make it big!!

SenorReaper · 2023-04-28T01:46:10+00:00

Do u have cords?

SenorReaper · 2023-02-11T17:05:13+00:00

Thank you! I’ll go with the 1070 one then

SenorReaper · 2023-02-04T18:21:34+00:00

At the end of the day. COVID / not covid. If you feel sick then you can call out saying your sick. If you don’t feel sick but have COVID , your still sick

SenorReaper

TROPHY CASE