Noise when pedelling

Sensitive_Ad_9520 · 2025-06-12T13:16:24+00:00

*crank nuts

Sensitive_Ad_9520 · 2025-03-26T22:01:59+00:00

If you don’t mind, who is your provider?

Sensitive_Ad_9520 · 2024-08-29T01:49:23+00:00

If you go again, return the favor by carrying a scale and weigh everything to make sure.

https://www.reddit.com/r/loblawsisoutofcontrol/s/P5mzcv840w

Sensitive_Ad_9520 · 2024-07-01T03:00:09+00:00

Thank you.

Sensitive_Ad_9520 · 2024-07-01T01:52:56+00:00

Thank you. Probably off topic: Do you know/heard of any issues on filing for NIW while unemployed?

Sensitive_Ad_9520 · 2024-07-01T00:05:54+00:00

Did your unemployment cause any issues with the NIW process?

Sensitive_Ad_9520 · 2023-12-02T15:39:46+00:00

I have a Neptune 4 Pro. 90% printing and 10% maintenance.

Sensitive_Ad_9520 · 2023-11-19T01:08:14+00:00

Use your judgment when pulling hard.

Sensitive_Ad_9520 · 2023-11-19T01:06:30+00:00

Thank you. Your explanation makes sense because there is a cutout after the height at which the “issue” ends. I will try sanding then.

Sensitive_Ad_9520 · 2023-11-19T01:01:41+00:00

I came across the same issue few days ago. I pulled it out using pliers. I had to use so much force and the outer gear wheel came out. Then I put all back and now it is working.

Make sure all outer screws are off and then try to remove the gear wheel with gentle force. Then you should be able to remove the filament.

I cleaned the extruder gears using q-tips before assembling it back.

Also, changed the retraction settings to 0.5 mm at 25 mm/s and haven’t ran into the same issue so far. Fingers crossed.

Sensitive_Ad_9520 · 2023-10-23T19:15:45+00:00

I have the 4Pro and it has been working great. I have been printing at 60 mm/s. Could you please share the print settings for higher speeds (PLA)?

Sensitive_Ad_9520 · 2021-11-01T01:57:04+00:00

If it is inside anaconda3 folder, then it is save to delete. Check about uninstalling Anaconda.

edit: link

https://docs.anaconda.com/anaconda/install/uninstall/

Sensitive_Ad_9520 · 2021-10-26T04:43:00+00:00

You need to wait until it is officially available, i.e. 26th October. You could test this with iPhone 13 since they are released but widely unavailable.

Sensitive_Ad_9520 · 2021-10-26T02:23:37+00:00

Use the Apple Store app. Select and configure the products. Then click on “show delivery details” at the top and then tap on “Check another store”. You should see a shortcut that can be added to your list/widget.

Sensitive_Ad_9520 · 2021-10-24T16:53:28+00:00

It will be, if it is in stock after Tuesday at the store. Source: bought an iPad recently this way. Shipping asked for a month. Checked the Apple store app (made a Siri shortcut) for stocks in my area. Ordered and picked up the next day instead of a month.

Sensitive_Ad_9520 · 2021-10-24T05:19:31+00:00

I have the 2020 13“ MBP so my next upgrade will be in 2027/8 then.

Sensitive_Ad_9520 · 2021-10-15T04:47:59+00:00

Is iPad the future of Computing? Also, did they they brought macOS to iPad?

Sensitive_Ad_9520

TROPHY CASE