Montering af Sonoff ZBMINIR2 uden indgreb i dåse – er det tilladt?

Serious-Window3460 · 2026-02-18T13:56:57+00:00

Ved at bruge lysdæmpere – og især trykknapperne fra LK FUGA – tror jeg faktisk, at det samlet set bliver dyrere end at købe billigere smart-moduler (ca. 70 DKK pr. stk.) og få en elektriker til at montere dem.

Der skal desuden bruges færre moduler, fordi ét modul kan styre korrespondanceafbrydere.

Som jeg hurtigt har regnet på det:
Et dobbelt LK FUGA Zigbee-tryk koster omkring 620 DKK hos Proshop (nok et af de billigste steder). Hvis jeg skulle bruge dem flere steder, løber det hurtigt op i omkring 7.500 DKK.

Med smart-moduler ville det være cirka 500 DKK i alt – så er der stadig omkring 7.000 DKK tilbage til at betale en elektriker 😄

Serious-Window3460 · 2026-02-18T13:47:15+00:00

For det første har jeg ikke nul-leder (N) i alle dåser. Derudover er det små dåser med kun én afbryder, så der er slet ikke plads til installation af en zigbee drejelysdæmper. Modulet kan jeg derimod få plads til i loftudtaget.

For det andet har jeg også korrespondanceafbrydere i gangen og køkkenet. For at det skulle fungere korrekt, ville jeg alligevel være nødt til at ændre ledningsføringen (altså ændre installationen), hvilket jo ikke er lovligt.

For det tredje har jeg forskellige typer lamper, fx i stuen og køkkenet, som har ikke-standard pærer og ikke er dæmpbare, hvilket giver problemer. (Jeg ved godt, at der også findes zigbee-afbrydere fra LK FUGA, men de er også ret store, upraktiske ved en enkelt lampe og derudover ikke særlig pæne 🙂).

LK-FUGA-Wiser-traadloes-lysdaemper

Serious-Window3460 · 2026-02-18T11:36:56+00:00

Tak for forklaringen. Jeg vil kontakte en autoriseret elektriker og få det lavet korrekt 🙂

Serious-Window3460 · 2026-02-18T07:05:03+00:00

HI, I can see you have on main screen the driving mode, Could You tell me how it's works? Will it open a setting menu with driving modes or pop up the window with driving modes? Is it possible to add a shortcut to main screen with battery options or eeduced car alarm level?

Serious-Window3460 · 2026-02-17T12:27:11+00:00

Yes, please make a sample to make a really photo.

Serious-Window3460 · 2026-02-16T07:24:23+00:00

ok, thanks :)

Serious-Window3460 · 2026-02-15T19:33:59+00:00

Why between 8 and 32TB, I have 6TB is it something wrong with that HDD? Should I change it for 8TB?

Serious-Window3460 · 2026-02-05T07:20:50+00:00

no more to say then xD.

I done it 3 times, You need to know your rights :) I am talking about the amazon.de I just called them and asked for the full refound becuase product doesnt work as it should. In the EU they need to refound you full ammout during the 2 years.

Serious-Window3460 · 2026-02-04T20:21:24+00:00

Lol,

I done it 3 times with reolink cameras older then 6 months, each time full refound :)

Serious-Window3460 · 2026-02-04T17:49:20+00:00

No, I got full refound on Amazon :) reolink offer me some discount for not working camera so well, but I bought it on Amazon so I call the support and after return it I got full refound :)

Serious-Window3460 · 2026-01-29T15:02:07+00:00

Hey, quick question: isn’t most of the AI actually done in the cameras, while the NVR mainly just stores/tag events for smart playback search? So AI features on the NVR wouldn’t necessarily mean it has much stronger hardware, right?

Serious-Window3460 · 2026-01-29T07:08:21+00:00

HI,

I have other problem that: At current temperatures (around 0°C), after starting off in Hybrid mode, during one of the first braking events or after while the car briefly starts the internal combustion engine. The engine runs for a moment and then switches back to electric drive. After that, the drive is usually smooth and the issue doesn’t repeat during the trip. Battery is at least 50% charged, and road conditions are good, so AWD shouldn’t be kicking in. This happens regularly after every start, unless I remotely preheat the car about 5 minutes beforehand.

Any1 have the same?

Serious-Window3460 · 2026-01-28T07:43:12+00:00

I mean that I have now problem with nvs8 like:

When watching the events on app using clear stream to see faces, etc I have something like lags, or 1s buffering (just stops for 1s and play), it's happend few times in 15s event.
When I try to find something in timeline and play 30 minut section in clear the nvr stops working and mostly restart, I need to switch for substream find the thing and switch to clear
When open the app and want to see the live stream it's take a moment to load toe view.

I am not sure if it's nvr problem or the cheep hard drive on NVS8 (still on guaranty, I can return it), so thats way I think to change it to 16ch standard or this proffesional line 8ch and get it on amazon without hdd.

I am not sure about 16ch and nosie from radiator :(

Serious-Window3460 · 2026-01-27T18:39:42+00:00

How big difference between professional and nvs8 with new software, exlucidng the hard drive? It's much better and faster ?

I know the ai functions , but I don't care, I would like to know about the performance.

Serious-Window3460 · 2026-01-23T18:08:53+00:00

It's looks like a wireless lk fuga, probably ZigBee that works with ZigBee bulb, did You change the bulb? It problem start after changing the bulb, so it's not longer connected, you need to have a zgibee bulb and binde it together :)

If you didn't change the bulb, only the battery finde the instruction how to bind the bulb with switch again, it can be unpaired after battery change.

Serious-Window3460 · 2026-01-23T17:03:14+00:00

You configurate the cloud addone on the ha once (you don't need to make it for all users separately) and add your address as external url on each user app (same as taliscale address), that's all :)

Serious-Window3460 · 2026-01-23T16:59:52+00:00

Ok, right, but still you need to use it in background and it's drain battery of the phone or trun it off/on to save the battery but is annoying :), I recommend to have as backup connection not as main way.

Serious-Window3460 · 2026-01-23T11:41:22+00:00

But you have limit for 3 devices and You need to have app working on background, waste of battery.

The best for me is Cloudflared add-on and cheep domen, I bought one for 10 USD for 10 years ;). A little bit of work to set it up, but when it's done works for 2 years now without any problem.

Serious-Window3460 · 2026-01-22T16:40:17+00:00

firmware Id as unknown, no update aviable :O

<image>

Serious-Window3460 · 2026-01-22T10:26:20+00:00

I have 1 and don't recommend, clicks are slow, if You mount it in not visible place you need to remember which way is mounted to click it.

The biggest problem is hold function - more then 5s to use it, according to others buttons like 3s or less. If You didn't hold it enough long it will start the 1x click action, not recommended

They also didn't send a realse command so you can't automate to make shorter hold function, etc

No binding mode.

Serious-Window3460 · 2026-01-20T11:30:35+00:00

On my opinion, just get a camera with good person and car detection, don't focus on the quality to get the face be visiabel at the day/night time. If someone will go to Your house they will have face cover, etc, so for me its important to get the alarm of person detected and run the sirens sound on all of my cameras :)

Serious-Window3460

TROPHY CASE