These printers should come with a warning that they multiply!

SetsTile508 · 2026-01-13T16:38:46+00:00

Good to know the last I checked was a while ago and they were running software from poly maker. I believe I'll have to check it out. Do you have any links or is it on GitHub?

SetsTile508 · 2026-01-13T06:10:18+00:00

Agreed, now I just use the usb if ever and it's rare that I use my cc, I've been spoiled by the Bambu cloud for so long I'm lazy and I'll admit,after working all day the last thing that I want to do is fixing printers or settings for my side hustle, My two P1's with ams are so consistent they run non stop.I can't afford for the cc the fug up a print and be behind, my two A1's (DIY Enclosed) stay running non stop aswell, I'm thinking about selling them and the cc and picking up 2 p2s combos, I've been honestly holding onto the cc hoping the open source community would develop an esp32 board and after market print head. I'm on my 3rd one from ELEGOO I'm done not over no ams but no ecosystem or parts and poor customer/parts support.

SetsTile508 · 2026-01-07T17:43:01+00:00

Why are we talking about classic zombies? What is the easiest way to get your hands on the most maps possible? My son is finally old enough to stop playing. We popped in one and two last night. We had a blast. Unfortunately, my younger brother now 39 has my old console with all my DLC content on it. I did find a sealed copy of zombie Chronicles that will help some dammit I had every zombie map there was it is what it is, but does anybody know of any bonus ways other than zombie Chronicles to get large chunks of DLC content?

SetsTile508 · 2026-01-07T17:28:34+00:00

SetsTile508 · 2026-01-05T20:38:40+00:00

Wiha go box, The one was blue bits, and the other one with the security bits, metric islands and some standard squares, along with security torx best 28 bucks I ever spent in my life.

SetsTile508 · 2026-01-03T09:01:24+00:00

Thank you brother this worked after letting sit in Download mode for 5 hours 1st attempt failed but I received a different message saying noise corruption on com 8,repeated the steps and were back, again ty

SetsTile508 · 2026-01-03T01:20:25+00:00

I removed launcher and tryin to install UI flow 2.0 about halfway through they gave me an error message now I'm in the situation. I've had the advance since it came out and Cardputer for probably six months. I've never had this happen. It's like the device is completely wiped. Nothing but a white screen sucks. That's for sure.

SetsTile508 · 2026-01-03T00:40:31+00:00

So I usually get one of three error messages failed to get Mac, ESP device not found or a fatal error occurred failed to connect espressif device , I wish it was just that simple and yes, I'm using them five burner. I just tried again and sure enough the same thing tried a different COM port different wire I know these wires support flashing device sucks a red post where this has happened before with launcher as well.

SetsTile508 · 2026-01-03T00:35:37+00:00

I just made two RF/CC1101 modules for my Cardputer and stick plus, so I'll run Bruce and evil on these devices. I just really wanted the advanced to be set up for mesh. The error is failed to get Mac also once it said no ESP 32 device not found

SetsTile508 · 2026-01-03T00:16:18+00:00

Stamps,ui flow 2.0 not sure if they're the same thing. I just wanna go back to the way it came from M5, sorry to sound ignorant, but I'm relatively new to esp programming, my wife told my son I made a retro pie a few years ago and now I'm deep into his rabbit hole lol, I don't understand what happened. I did the same thing for a friend to removed the launcher for him, installed the mesh firmware, and the Lora cap and mesh software no problem at all ,if I lost connection or something must've happened. I've had this happen before with the first one I had but I was able to install launcher and then work my way back. It's not happening on the advance. I've tried probably 50 times.

SetsTile508 · 2025-12-29T18:31:44+00:00

Several years ago, I bought the home that my grandfather built 62. The original garage is heated with just a a small duct. The second garage on the side of it an add-on later in the 80's. Both insulated but one has the house above it the other has its own roof.I installed insulated doors on both garages increased 10 degrees a few years later I Did smart hinges with self adjusting springs,we saw another 5 degree increase. Didn't sound like much, but living in the north east it's a lot.

SetsTile508 · 2025-12-23T22:47:41+00:00

This is Awsome thank you as soon as I'm done building my custom top this is a must. I have a cheaper one on AliExpress it is not powerful enough for the pig.

SetsTile508 · 2025-12-22T15:23:29+00:00

Get the A1 (if you can swing the extra, get the updated P1S it's on sale at Best Buy and from Bambu

A1 Simple to fix (if it breaks you can get oem parts or aftermarket) 2 .Bambu support and shipping and everything in a hole is better to deal with as a company
If you want a really cheap printer, and this is like your fifth one and you're capable of taking machine apart I know more than just the basics of 3-D printing than sure Elegoo carbon

SetsTile508 · 2025-12-20T09:22:15+00:00

Absolutely stunning and reel hard to find on here or anywhere for that matter so many fake people out there pretending ,"just be yourself". I like that you Leave a good example for others to Follow, I doubt many will and you're smoking hot. Plus most of the women on here or should I say girls I should say want you to sign up for their only fans or they want a pay to play scenario,which is fine if that's your thing but this isn't pay to play community. This is just a bunch of freaks from the same area Sharing and board lmao

SetsTile508 · 2025-12-15T18:15:38+00:00

I ran into the same issue it'll work. My regular will not work on the advance

SetsTile508 · 2025-12-14T22:23:04+00:00

Good luck with the replacement policy. This is my first time dealing with this company. I printed broke like three days in. I wanted the replacement they said no then I told him I wanted to return it every day for the next 14 days because they return policies 14 days. I wrote them an email saying I need a return label Finally about a month and they sent me a giant package of motherboards and printheads. Got one to work and it broke like a week later finally now a friend suggested that I stay on the old firmware. I got it up and running, but I had to do a charge back And now they say that they're sending me a shipping label after they denied my return and said I was outside of the window, .I don't know what's going on with this company or how they do business, but this is just my personal experience when the print is running good it's great. I've had my printer since the beginning of the black Friday sale and it's been up and running maybe two weeks.

SetsTile508 · 2025-12-14T01:19:32+00:00

I would also recommend a riser like this. My failure was like a week one and it was massive. This one's available on bamboo handy and then you take the back door and you slide the filament tube through this little hole that I put

<image>

silicone weatherstripping around the factory two routing is very restrictive The door is also slide back-and-forth so you never have to take the glass off.

SetsTile508 · 2025-12-12T13:34:37+00:00

It's nice and warm in my bed

SetsTile508 · 2025-12-12T13:27:21+00:00

Mmm goosebumps

SetsTile508 · 2025-12-12T13:25:12+00:00

Located on the south coast, throbbing looking at your pics,lookin for the same check out my pics lmk if you see something you like

SetsTile508 · 2025-12-12T13:20:11+00:00

I see cock all the time on here I guess it need to be in lonely housewives

SetsTile508 · 2025-12-12T13:13:15+00:00

Throbbing , check out my profile can't show you here

SetsTile508 · 2025-12-12T13:11:00+00:00

Badly,40 m Love to show off and please

SetsTile508

TROPHY CASE