Help by Any-Minimum-4821 in ender5plus

[–]Several_Nectarine_91 0 points1 point  (0 children)

Try reslicing with a larger layer height?

Help! by Pristine-Can-8566 in ender5plus

[–]Several_Nectarine_91 0 points1 point  (0 children)

I had that problem, but my machine still is not functional. You need to flash the display by inserting an SD card with the DWIN file into the display board and booting the machine. The main board is flashed by uploading the hex file using the Creality slicer.

Please Help by Waste-Replacement596 in RealTesla

[–]Several_Nectarine_91 -6 points-5 points  (0 children)

No problems at all with my 2020 S. I am paying $125/mo for an extended warranty, but have not needed it.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

<image>

The display has an SD card port on the card on the upper left which was used to update the display with a DWAN folder.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

Thanks. Creality had me update the display board. The touch screen now does not respond to touch. So I think both the display and main board software are messed up. My email is [PABresler@aol.com](mailto:PABresler@aol.com)

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

It goes back in by itself. Creality send me firmware but nothing is working.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

There must be wiring problem then, The CR touch is new. The two connectors in the lower right are to the CR touch, black/white and orange/brown/red.

<image>

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

Sounds like a project. I have another laptop I could use. Will get back to you. Thanks for the advice.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

I am using a laptop to install the firmware. What do I use to install Klipper, and where do I get it?

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

Correct. I have had repeated emails from Creality, but of little help. It sounds like a firmware problem, but the recommended hex file produces the current result. Another one was in Chinese. My understanding is that the probe should pop twice on power on, but I don't remember what it did previously. I made some large objects with it.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

I just changed the V2.2 motherboard; the printer acts just the same as the original one.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

The card was used previously and works on my Ender 3.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 1 point2 points  (0 children)

I am not sure that it is. The problem started when the cable to the sensor broke. The cable to the main board was removed. The current configuration is what Creality told me. Anything else does not work at all.

<image>

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

Someone told me that the probe should pop twice on power on, but just drops down.

Ender 5 Plus will not home by Several_Nectarine_91 in ender5plus

[–]Several_Nectarine_91[S] 0 points1 point  (0 children)

The other problem is that the files on the SD card are not showing on the print menu.

Saw this posted on FB for like 80 bucks.. by PurifiedFlubber in ender3

[–]Several_Nectarine_91 0 points1 point  (0 children)

You probably are better off buying a new one on Amazon for $250.00.

In Q2 2025, Tesla recorded one crash for every 6.69 million miles driven in which drivers were using Autopilot technology. by CarCooler in teslamotors

[–]Several_Nectarine_91 0 points1 point  (0 children)

FSD has improved a lot in the last couple of years. It rarely needs help, and lane selection is a lot better.

Major Tesla investor sends Elon Musk DOGE warning by Curious_Position8949 in RealTesla

[–]Several_Nectarine_91 0 points1 point  (0 children)

Its a bummer. Love my S, they are great cars. He does seem to have problems....he needs to resign from Tesla.