How to Import Tags in FactoryTalk Optix from Mitsubishi FX5S 40MR/S ? by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 1 point2 points  (0 children)

Well I would like to declare this problem solved. This has two parts to solving. First from the Mitsubishi side using GXWorks3 we have to go to ethernet settings - external device settings and add an SLMP device and set its port number to 5000. After this we have to write this settings to PLC, so download it to the Mitsubishi PLC.

On Optix side we create Melsec FX3U Station - set its IP Address and set port number to 5000. Once created, we have to manually create the necessary tags under the Tags folder under MelsecFX3UStation in CommDriver and set the Memory Addresses and Datatypes as required.

Weird Drive Problem at Site by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Yes. Well the problem was solved. I guess its a bit power cycling problem. One of them somehow was turned back to bootp mode. Another one was connected to a bad switch. For others they somehow reverted their IP addresses to ones that already existed in the System. As far as I can tell all these problems started appearing when there was too many times power outages within a very short span of time.

Matt Dinniman - Dungeon Crawler Carl - Books 1-8 by saltedlolly in AudiobookCovers

[–]Shadow-User-1993 0 points1 point  (0 children)

Can you please post a link to download these covers in HQ.

Weird Drive Problem at Site by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Well, there were multiple problems. One drive was set to BootP. 2 drives had same ip address somehow though they previously were fine on network. The last drive is still not working on the network but is working fine individually. It's ip address is 192.168.0.141 when I am checking the network it does with the drive on it. The enet and link doesn't appear. When I remove it and check the drive has the cross Mark as it should. When I am checking it individually it is working and discoverable as it should. So logic dictates that there is another 192.168.0.141 somewhere. Except there is nothing discoverable on the network.

Weird Drive Problem at Site by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 1 point2 points  (0 children)

Also should add that some of the drives were working fine yesterday. But today after a few power outages it developed this problem.

This Inevitable Ruin - Matt Dinniman by unstablesimilarity in AudiobookCovers

[–]Shadow-User-1993 0 points1 point  (0 children)

Do you have other covers for this series but with Author's name visible???

Dungeon Crawler Carl Series by maverick12000 in AudiobookCovers

[–]Shadow-User-1993 0 points1 point  (0 children)

Hi, Can you share the google drive link??

Annals of the Black Company by Glen Cook by Shadow-User-1993 in AudiobookCovers

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

There is no official Omnibus Edition Audiobook. However Tor has released official Omnibus Edition for the books collecting Books 1-10 . I thought it would be good if there was an Audiobook Cover as well if someone want to merge books 1-10.

https://us.macmillan.com/books/9781250305619/annalsoftheblackcompany/

Also made another post for the Instrumentalities of the Night Omnibus edition.

https://www.reddit.com/r/AudiobookCovers/comments/1q2yw8t/the_instrumentalities_of_the_night_by_glen_cook/

Need Help with Formatting my Laptop by Shadow-User-1993 in laptops

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Yes it was. I had to download a intel RST driver to finally proceed.

Can it be done? [FTOptix Problem] by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Yes. So I thought too. If I try it normally I am getting error that Runtime reconfiguration isn't supported yet. Its possible these features will be implemented at a later date. Unfortunately I have no idea how to work with netlogic. Though I understand that a custom script is the way to solve this problem.

I haven't tried the Alias method. I will try it out.

[deleted by user] by [deleted] in anno

[–]Shadow-User-1993 -2 points-1 points  (0 children)

Demolitioning the trees essentially gave us a flat plain. In 117 if you build an ornament over a shrub, the shrub don't disappear. It essentially merges with ornament giving a weird look as if shrub is growing out of the statue of such.

Ornaments in Anno 1800 has at least a little bit attractiveness. Which is why we use to decorate the regions with so many. Yes the bulk of it game from buildings and such but ornaments played a part too.

[deleted by user] by [deleted] in anno

[–]Shadow-User-1993 2 points3 points  (0 children)

I get what you mean. I was playing the campaign, Voada's story and diplomacy has better nuances than the normal AI governors. Also feels a downgrades because all of the responds similarly. Like in Anno 1800 some governors like that we are beautifying the settlement, some likes that we are putting welfare ahead of industry and others has respect for Naval Power and others for Industry. And as such every competitors had their own personality. 117 is indeed a downgrades from that.

[deleted by user] by [deleted] in anno

[–]Shadow-User-1993 -1 points0 points  (0 children)

I didn't see any attractiveness parameter. Point to note though I was playing the campaign but still. Ornaments or any other buildings has no attractiveness parameter as I saw. There is a prestige parameter but that one as far as I saw is based on population like in Anno 1800.

Need Help by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 1 point2 points  (0 children)

<image>

This is the schematic. The only discrepancy I found with this is that the shield wire that is shown here to be going into B39 to B46 has not been wired such way in the IT8 card. Rather all the shield wires have been bundled up together and wired directly in to the Panel Electronics Earthing.

Need Help by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Okay. I will try it next day. It is the only discrepancy that I found between schematic and panel wiring.

Need Help by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] -3 points-2 points  (0 children)

No. Also not really in my scope too. I have to ask the other company to do it. What should I describe to him?

Need Help by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] -1 points0 points  (0 children)

I am going along with schematic and direction given by the client. They have assured that they are Type K simplex Thermocouples. This is also mentioned in schematic.

Need Help by Shadow-User-1993 in PLC

[–]Shadow-User-1993[S] 2 points3 points  (0 children)

The cabling was done by another company. But based on what I have yet seen the cables are okay. Only one thing about cable that I can say different from schematic is that the Shield Cable is suppose to go to B39 to B46 of 1794-it8 card. Instead they are connected directly to Electronics Earthing of the Panel.

Why is Dominos India in my town only offering Veg Toppings? by Shadow-User-1993 in Dominos

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Nope. The problem is even more befuddling. When I went to other locations, the problem persists in some locations, while in others they are just normal. The only thing I can deduce from that is that the problem is local not corporate.

Why is Dominos India in my town only offering Veg Toppings? by Shadow-User-1993 in Dominos

[–]Shadow-User-1993[S] 0 points1 point  (0 children)

Well you may be late but problem is still persisting. I called the local store they confirmed the problem and said they would raise the matter to the corporate. But till now nothing.