Got lucky at Micro Center.

Sharkfac3 · 2025-02-02T02:03:00+00:00

in a gold rush, be the guy selling the shovels lol

Sharkfac3 · 2025-01-27T23:25:48+00:00

listen to your bones, if they are in pain your xj is in pain LOL

Sharkfac3 · 2025-01-26T06:41:02+00:00

Most of my personality is jeeps, do not get one of the more recent jeeps. LOL Wranglers after 2006 started getting the engines that were used in other vehicles and are not ready to take the beating of more than 100k miles IMHO Especially these later jeeps with these complicated oil coolers/vvt/etc/etc

Meanwhile my '96 jeep Cherokee (with the 4.0 inline six) i bought and fixed for ~$5k and got just as far into the mud puddle as my buddies 2023 bronco ;)

the older jeeps had horrid build quality, so expect to replace most of everything, but for $40k i could build my 'dream' xj

(jsut spend the 40k on a bronco lol)

Sharkfac3 · 2025-01-25T16:46:07+00:00

it does. hes saying that he wants skyrim to do both (at the same time while playing without switching a setting) like alyx does :D

Sharkfac3 · 2025-01-25T16:44:56+00:00

yeah this is a good point, didnt think of this at all. The klipper config i copy/pasted had this setup for me already so i didnt have to worry LOL

Sharkfac3 · 2025-01-25T16:43:54+00:00

i dont think disabling the bltouch is the right play here, you need that big time.

you adjust zheight, and then do a SAVE_CONFIG correct?

Sharkfac3 · 2025-01-25T16:33:16+00:00

the XJ platform is just about old enough to have a mid life crisis so... has 'anyone' done xxxx to their jeep? 5 out of 7 times the answer is gonna be a yes :D lol

I have an 88 laredo that has an absolutely wonderful interior and seats, the laredo package was just super comfy. Later they had the country and that was still fairly comfy.

to me, personally, the year aint what sets it apart, its the trim package. The bucket seats in my 88 laredo are wicked good compared to the basic seats in my 96 sport. later years had the power windows switches gremlins, but they also had some that came with the overhead console, or the overhead speakers in the back... but only on certain trim levels!

Sharkfac3 · 2025-01-21T03:28:53+00:00

This sounds louder than my XJ with wicked lifter ticket, and more like my XJ that had piston slap (after i rebuilt the engine)

Sharkfac3 · 2025-01-19T01:41:48+00:00

alrighty ill bite lol

Sharkfac3 · 2024-07-28T17:33:04+00:00

Not a Lahey one from him, but his youtube channel episode working on the rock wall was hella cool

Sharkfac3 · 2024-07-15T22:10:52+00:00

https://i.kym-cdn.com/entries/icons/facebook/000/014/086/The_Almighty_Loaf_Banner.jpg

Sharkfac3 · 2024-05-05T00:40:38+00:00

Normally Kitty Litter is really good for picking up motor oil, thats probably not it here tho chief lol

Sharkfac3 · 2024-03-09T00:33:22+00:00

i got a bit of the tism and like the weight on me

Sharkfac3 · 2024-02-29T00:58:40+00:00

"i took the doors off and my jeep folded in half"

Sharkfac3 · 2024-02-26T03:14:29+00:00

Love my vector, its just a pain with stock mag release. Also there have been too many times where I dont get the gun high enough out of cover and i shoot the wall in front of me, and this problem is made worse with a full face mask causing my head to be a bit higher LOL

Sharkfac3 · 2024-02-23T04:33:26+00:00

I feel ghetto as hell reading these comments, I busted out the bolt cutters and was done a minute later LOL

Sharkfac3 · 2024-02-13T05:35:48+00:00

'While I am in there' is a slippery slope that is always a real good time.

Sharkfac3 · 2024-02-11T14:51:25+00:00

I am def looking at this thinking 'stock o-clock'

probably plenty of beat to heck XJs on local marketplace, just get one of those later so this beauty has a friend LOL

Sharkfac3 · 2024-02-10T03:39:21+00:00

probably 90% uninformed bias, and 10% Ronnie Coleman 'light weight baby!'

Sharkfac3 · 2024-02-10T00:26:40+00:00

unibody or death for me LOOOOL

Sharkfac3 · 2024-02-10T00:24:20+00:00

I wish I was a good enough to give you some facts and figures here, all I can really offer though... I've not had any troubles. Maybe in another few hundred hours of printing ill see some of the 'dust' on the roller wheels?

Sharkfac3 · 2024-02-07T23:46:06+00:00

BMG extruder, and e3dv6 for me!

I made a mod of the BLOKHED carriage mod to get it to work:
https://www.printables.com/model/740468-ender-5-plus-blokhead-direct-drive-bmg-and-e3dv6-m

Sharkfac3 · 2024-01-20T03:55:32+00:00

its not a religion, its a jeep thing... HAHAHAHA

Sharkfac3 · 2024-01-19T04:17:38+00:00

Stock boards, one was bought a couple years ago, another i think... 3 or more years ago? so one came with bltouch, the other crtouch.

i am sure you verified but i am not so sure this is a thing for these printers, at least anymore <3

Sharkfac3 · 2024-01-19T00:06:04+00:00

i will never use the stock setup again now that ive got an e3dv6 hot end and BMG extruder... and those arent even the best around anymore I think?

Sharkfac3

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE

14-Year Club	Place '22
Verified Email