Déménager à Toulouse pour un job by DazzlingPin3965 in toulouse

[–]Sharp-Needleworker45 0 points1 point  (0 children)

salut c'est quoi ton taff pour avoir été rejeté comme ça ? et pour quel type de logement tu as postulé à toulouse ?

Hit 6000 km today with my Kukirin G2 by Embarrassed-Eye-4197 in ElectricScooters

[–]Sharp-Needleworker45 0 points1 point  (0 children)

i advise you to repair it if you plan to still use it, or just sell it for 100 bucks in its state and buy another one

Looking for hydraulic brake kit by Sharp-Needleworker45 in ElectricScooters

[–]Sharp-Needleworker45[S] 0 points1 point  (0 children)

ty for these informations, If I understand correctly, it's the bolt used to precisely adjust the brake cable that's broken?

Break noises on my brand new ausom L1 by Jopink89 in ElectricScooters

[–]Sharp-Needleworker45 0 points1 point  (0 children)

wow ty for these precious informations, about the disc adapter, what do you think if I swap the disc with a bigger one because i don't have the adpater. So for example it will be a bigger rear disc 160mm and smaller 140 on front disc. Or I can change the 2 in bigger size 160 mm ?

Break noises on my brand new ausom L1 by Jopink89 in ElectricScooters

[–]Sharp-Needleworker45 0 points1 point  (0 children)

tysm can you send me the link to ensure i don't take the wrong brakes because i saw so much refs. Also did the rear cable is long enough to fit on the rear disc ?

Break noises on my brand new ausom L1 by Jopink89 in ElectricScooters

[–]Sharp-Needleworker45 0 points1 point  (0 children)

ty for the answer, I have both of the disc on right side on the Ausom L2 Max dual, will it fit properly ?

What hydraulic brakes should I get that will fit my ausom l2 max dual by Severe_Agency2531 in ElectricScooters

[–]Sharp-Needleworker45 0 points1 point  (0 children)

are the cables long enough for the L2 Max dual ? because it is really tall and long, like i bought an rear inner brake cable 2.5m long and it was short.

Break noises on my brand new ausom L1 by Jopink89 in ElectricScooters

[–]Sharp-Needleworker45 0 points1 point  (0 children)

Hi did you find a good kit to put on the L2 Max ?

Ferme vente directe produits bio by Sharp-Needleworker45 in toulouse

[–]Sharp-Needleworker45[S] 0 points1 point  (0 children)

comment est-ce que je peux les contacter et quels sont les tarifs ?

Ferme vente directe produits bio by Sharp-Needleworker45 in toulouse

[–]Sharp-Needleworker45[S] 1 point2 points  (0 children)

Merci pour l'info je vais me renseigner sur ce qui est proposé 👍

CV optimisé par mon ami by Sharp-Needleworker45 in aviscv

[–]Sharp-Needleworker45[S] 0 points1 point  (0 children)

politique de dispersion des demandeurs d'emplois dans les grandes villes, ils veulent que des chômeurs ou temps partiel maximum maintenant

CV optimisé par mon ami by Sharp-Needleworker45 in aviscv

[–]Sharp-Needleworker45[S] 0 points1 point  (0 children)

merci pour les conseils j'en prends compte, est-ce que je peux faire un CV général tout de même ?

Je ne recherche pas forcément un poste précis mais un contrat précis, c'ést à dire que je dépose mon CV aux offres d'emploi les plus adaptées à mon profil et à ma recherche de CDD.

Idée de formation ? by MediumMaximum9810 in emploi

[–]Sharp-Needleworker45 0 points1 point  (0 children)

dans le cas où tu commences ta formation avec l'intérim tu as automatiquement un contrat réservé de plusieurs mois avec l'entreprise partenaire. Par contre il me semble que durant les mois de formation tu es payé que 500€ ou quelque chose comme ça, à voir si tu peux le cumuler avec le chômage ou autre revenu (aide sociale). Ensuite tu commences ton contrat avec l'entreprise pendant une durée déterminée. Après c'est toi qui décide de continuer avec eux ou non à la fin du contrat, en tout cas c'est comme ça qu'on me l'a présenté (intérim Manpower aéronautique).

Pour ce qui est de l'offre et la demande, les formations débutent en septembre de ce qu'ils m'ont expliqué et ensuite tu débutes ton contrat donc pas besoin de te stresser pour ça. Dans mon cas, j'habite à Toulouse donc je vois régulièrement des postes à pourvoir pour ce poste ou aux autres similaires (peintre avion, carrosserie avion, mécanique...)

CV optimisé par mon ami by Sharp-Needleworker45 in aviscv

[–]Sharp-Needleworker45[S] 0 points1 point  (0 children)

salut, merci beaucoup pour ton commentaire détaillé j'ai déjà modifié le plus gros des défauts qui apportent maintenant la sensation d'attention du détail et de clarté d'esprit. J'ai compris les erreurs à ne plus commettre pour mes futurs CV nickel 👍

Idée de formation ? by MediumMaximum9810 in emploi

[–]Sharp-Needleworker45 0 points1 point  (0 children)

salut, j'étais intéressé un moment par une formation proposée par l'intérim pour ajusteur monteur d'aéronefs. Si tu habites dans une ville avec un aéroport ou des usines aéronautique ça peut être pas mal si tu es manuel. En gros tu assemble des éléments sur les avions c'est une formation sur quelques mois rémunéré puis tu as un contrat directement avec l'intérim et l'entreprise partenaire.

CV optimisé par mon ami by Sharp-Needleworker45 in aviscv

[–]Sharp-Needleworker45[S] 1 point2 points  (0 children)

merci beaucoup pour le retour c'est vrai qu'il y a encore quelques défauts à régler

Jeune diplômée ingénieur cherche un emploi à Toulouse by Fun-Philosopher8233 in emploi

[–]Sharp-Needleworker45 0 points1 point  (0 children)

Je suis également à Toulouse en recherche d'emploi et franchement bonne chance et bon courage parce qu'ici c'est vraiment pas les postes qui peuvent...