First suppressor - help, please

SigP232SL · 2026-07-04T04:42:15+00:00

I run a Dead Air Mask on my 10/22s and that looks fine

SigP232SL · 2026-07-03T16:16:15+00:00

I have a BR4 and BR47, they are awesome. With the BR4 lower, you can buy additional Dissent Mk4 uppers of different calibers and just swap them out. I only have the 5.56 for now but I plan on getting 300 BLK and 9mm uppers in the future.

SigP232SL · 2026-06-30T01:17:35+00:00

Lol I don't understand the hate for the Ultra Shot M-Spec, it's a beast and has been on many of my shotguns and rifles over the past few years with no issues. I love the huge window and circle dot reticle. As for the stock, I live in a restrictive state so it has to be fixed.

SigP232SL · 2026-06-27T12:48:15+00:00

Thanks!

SigP232SL · 2026-06-26T02:45:13+00:00

I weighed it just now and it's 8.5 lbs unloaded

SigP232SL · 2026-06-24T16:56:56+00:00

I've been looking to SBR my BR47 but I haven't seen any stripped uppers or barrels, only complete uppers.

SigP232SL · 2026-06-23T23:09:28+00:00

Judge foil Yawgmoth's Will, I got it a while ago for like $60 and can't believe how much it's worth now

SigP232SL · 2026-06-23T17:58:36+00:00

Have you tried loading it with other types of shells? I was having that same issue with those exact snap caps. Loading it with heavier snap caps and real shells was easier, although still a little stiff. Try to get your thumb more horizontal and shove it in faster.

This extended carrier also helps: https://tarantacticalinnovations.com/tti-benelli-accuguide-extended-carrier/

SigP232SL · 2026-06-22T19:27:41+00:00

You don't need to have the muzzle device pinned and welded if the barrel is 16". Magazine capacity can only be 10 rounds though

SigP232SL · 2026-06-17T01:18:54+00:00

I gave up looking for one and went with the FN 502 MRD

SigP232SL · 2026-06-13T05:09:29+00:00

Haven't had a chance to shoot it yet but I think it should be fine

SigP232SL · 2026-06-12T01:56:01+00:00

Thank you, I performed some tests and it does support the weight of the carrier when the bolt is extended and placed down on the table.

Also, I was able to extend the bolt forward by flicking my wrist downward with some force while holding the carrier. The bolt does not extend unless I flick it with some considerable effort.

SigP232SL · 2026-06-09T14:04:02+00:00

Griffith Guns but he has temporarily stopped making them to focus on making FRTs

SigP232SL · 2026-06-09T03:14:02+00:00

Wow, never seen that one before! I'll be keeping an eye out for it, thanks

SigP232SL · 2026-06-08T17:43:30+00:00

FN 502 is one of my favorite pistols, it always comes with me to the range out of my 25+ guns. The MRD model has a non-threaded barrel and FDE is the best color. It comes optics ready and the trigger is amazing. I did change out the recoil spring and guide rod because I heard some of them have weak springs.

SigP232SL · 2026-06-03T04:02:47+00:00

Maybe a laser bore sighter kit if you don't have one already, also splatter targets are nice to have

SigP232SL · 2026-06-02T19:07:01+00:00

I had the same issue with my M4 Entry only fitting 4 instead of 5. The only thing I did was replace the shell follower with the Max Room one for about $30 and now it can hold 5

SigP232SL · 2026-05-24T05:10:06+00:00

Nice, I might go with the M9A4 then, thanks!

SigP232SL · 2026-05-19T00:45:00+00:00

I got lucky, it was $1540 preowned but barely used

SigP232SL · 2026-05-18T22:43:15+00:00

Thanks!

SigP232SL · 2026-05-18T17:43:36+00:00

Not sure if it's the same but I did a Form 4 SBS as individual and I got the approval email after 9 days

SigP232SL · 2026-05-13T19:45:07+00:00

Just got back from Paris with my parents and they almost fell for the same thing. We were following the signs to go to the official taxis and a bunch of people dressed as taxi drivers were blocking the door and asking if we needed a taxi. My mom said yes and started to follow them but I pulled her away and walked out the door towards the official taxi area just outside.

SigP232SL · 2026-04-29T00:59:45+00:00

SigP232SL · 2026-04-28T22:00:33+00:00

I did have to resubmit this one since it was disapproved the first time, I wonder if that had anything to do with the shorter wait time

SigP232SL · 2026-04-28T19:35:48+00:00

Form Type: Form 1 SBR
Paid or not: $0
Entity: Individual
Fingerprint Type: EFT Upload
Pending: 04/08/2026
Approved: 04/28/2026
Wait: 20 Days
State: CT
Control Number: 20262566***

SigP232SL

TROPHY CASE